[PATCH v9 13/22] powerpc/powernv: Support PCI slot ID

[Gavin Shan <gwshan@linux.vnet.ibm.com>]

The reset and poll functionality from (OPAL) firmware supports
PHB and PCI slot at same time. They are identified by ID. This
supports PCI slot ID by:

   * Rename the argument name for opal_pci_reset() and opal_pci_poll()
     accordingly
   * Rename pnv_eeh_phb_poll() to pnv_eeh_poll() and adjust its argument
     name.
   * One macro is added to produce PCI slot ID.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/opal.h              | 4 ++--
 arch/powerpc/include/asm/pnv-pci.h           | 4 ++++
 arch/powerpc/platforms/powernv/eeh-powernv.c | 8 ++++----
 3 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9d86c66..348132c 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -131,7 +131,7 @@ int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t
 int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
 					uint16_t dma_window_number, uint64_t pci_start_addr,
 					uint64_t pci_mem_size);
-int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+int64_t opal_pci_reset(uint64_t id, uint8_t reset_scope, uint8_t assert_state);
 
 int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer,
 				   uint64_t diag_buffer_len);
@@ -148,7 +148,7 @@ int64_t opal_get_dpo_status(__be64 *dpo_timeout);
 int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
 			    __be16 *pci_error_type, __be16 *severity);
-int64_t opal_pci_poll(uint64_t phb_id);
+int64_t opal_pci_poll(uint64_t id);
 int64_t opal_return_cpu(void);
 int64_t opal_check_token(uint64_t token);
 int64_t opal_reinit_cpus(uint64_t flags);
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index 6f77f71..c607902 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -13,6 +13,10 @@
 #include <linux/pci.h>
 #include <misc/cxl-base.h>
 
+#define PCI_SLOT_ID_PREFIX	0x8000000000000000
+#define PCI_SLOT_ID(phb_id, bdfn)	\
+	(PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id))
+
 int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
 int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
 			   unsigned int virq);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 593b8dc..3b17033 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -717,12 +717,12 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
 	return ret;
 }
 
-static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+static s64 pnv_eeh_poll(unsigned long id)
 {
 	s64 rc = OPAL_HARDWARE;
 
 	while (1) {
-		rc = opal_pci_poll(phb->opal_id);
+		rc = opal_pci_poll(id);
 		if (rc <= 0)
 			break;
 
@@ -762,7 +762,7 @@ int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 	 * reset followed by hot reset on root bus. So we also
 	 * need the PCI bus settlement delay.
 	 */
-	rc = pnv_eeh_phb_poll(phb);
+	rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE) {
 		if (system_state < SYSTEM_RUNNING)
 			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
@@ -805,7 +805,7 @@ static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
 		goto out;
 
 	/* Poll state of the PHB until the request is done */
-	rc = pnv_eeh_phb_poll(phb);
+	rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE)
 		msleep(EEH_PE_RST_SETTLE_TIME);
 out:
-- 
2.1.0