From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Jingoo Han <jingoohan1@gmail.com>, <linux-kernel@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-samsung-soc@vger.kernel.org>,
<linuxppc-dev@lists.ozlabs.org>, <linux-arm-kernel@axis.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
Gabriele Paoloni <gabriele.paoloni@huawei.com>,
Pratyush Anand <pratyush.anand@gmail.com>,
nsekhar@ti.com, Kishon Vijay Abraham I <kishon@ti.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Minghuan Lian <minghuan.Lian@freescale.com>,
Zhou Wang <wangzhou1@hisilicon.com>,
Murali Karicheri <m-karicheri2@ti.com>,
Niklas Cassel <niklas.cassel@axis.com>,
Mingkai Hu <mingkai.hu@freescale.com>,
Roy Zang <tie-fei.zang@freescale.com>,
Lucas Stach <l.stach@pengutronix.de>
Subject: [PATCH 02/10] PCI: dwc: *all*: Add platform_set_drvdata
Date: Wed, 15 Feb 2017 18:48:11 +0530 [thread overview]
Message-ID: <1487164699-30708-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1487164699-30708-1-git-send-email-kishon@ti.com>
Add platform_set_drvdata in all designware based drivers to store the
private data structure of the driver so that dev_set_drvdata can be
used to get back private data structure in add_pcie_port/host_init.
This is in preparation for splitting struct pcie_port into core and
host only structures. After the split pcie_port will not be part of
the driver's private data structure and *container_of* used now
to get the private data pointer cannot be used.
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/dwc/pci-dra7xx.c | 3 ++-
drivers/pci/dwc/pci-exynos.c | 3 ++-
drivers/pci/dwc/pci-imx6.c | 3 ++-
drivers/pci/dwc/pci-keystone.c | 2 ++
drivers/pci/dwc/pci-layerscape.c | 2 ++
drivers/pci/dwc/pcie-armada8k.c | 2 ++
drivers/pci/dwc/pcie-artpec6.c | 2 ++
drivers/pci/dwc/pcie-designware-plat.c | 2 ++
drivers/pci/dwc/pcie-hisi.c | 2 ++
drivers/pci/dwc/pcie-qcom.c | 2 ++
drivers/pci/dwc/pcie-spear13xx.c | 3 ++-
11 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index ec5617a..d1cd476 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -433,6 +433,8 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
return ret;
}
+ platform_set_drvdata(pdev, dra7xx);
+
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
@@ -459,7 +461,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
if (ret < 0)
goto err_gpio;
- platform_set_drvdata(pdev, dra7xx);
return 0;
err_gpio:
diff --git a/drivers/pci/dwc/pci-exynos.c b/drivers/pci/dwc/pci-exynos.c
index f1c544b..c179e7a 100644
--- a/drivers/pci/dwc/pci-exynos.c
+++ b/drivers/pci/dwc/pci-exynos.c
@@ -583,11 +583,12 @@ static int __init exynos_pcie_probe(struct platform_device *pdev)
goto fail_bus_clk;
}
+ platform_set_drvdata(pdev, exynos_pcie);
+
ret = exynos_add_pcie_port(exynos_pcie, pdev);
if (ret < 0)
goto fail_bus_clk;
- platform_set_drvdata(pdev, exynos_pcie);
return 0;
fail_bus_clk:
diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index c8cefb0..6e5d06f 100644
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -719,11 +719,12 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
if (ret)
imx6_pcie->link_gen = 1;
+ platform_set_drvdata(pdev, imx6_pcie);
+
ret = imx6_add_pcie_port(imx6_pcie, pdev);
if (ret < 0)
return ret;
- platform_set_drvdata(pdev, imx6_pcie);
return 0;
}
diff --git a/drivers/pci/dwc/pci-keystone.c b/drivers/pci/dwc/pci-keystone.c
index 043c19a..4c7ba35 100644
--- a/drivers/pci/dwc/pci-keystone.c
+++ b/drivers/pci/dwc/pci-keystone.c
@@ -422,6 +422,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
if (ret)
return ret;
+ platform_set_drvdata(pdev, ks_pcie);
+
ret = ks_add_pcie_port(ks_pcie, pdev);
if (ret < 0)
goto fail_clk;
diff --git a/drivers/pci/dwc/pci-layerscape.c b/drivers/pci/dwc/pci-layerscape.c
index ea78913..89e8817 100644
--- a/drivers/pci/dwc/pci-layerscape.c
+++ b/drivers/pci/dwc/pci-layerscape.c
@@ -268,6 +268,8 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
if (!ls_pcie_is_bridge(pcie))
return -ENODEV;
+ platform_set_drvdata(pdev, pcie);
+
ret = ls_add_pcie_port(pcie);
if (ret < 0)
return ret;
diff --git a/drivers/pci/dwc/pcie-armada8k.c b/drivers/pci/dwc/pcie-armada8k.c
index 0ac0f18..5a28dcb 100644
--- a/drivers/pci/dwc/pcie-armada8k.c
+++ b/drivers/pci/dwc/pcie-armada8k.c
@@ -226,6 +226,8 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
goto fail;
}
+ platform_set_drvdata(pdev, pcie);
+
ret = armada8k_add_pcie_port(pcie, pdev);
if (ret)
goto fail;
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 212786b..187a98d 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -261,6 +261,8 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
if (IS_ERR(artpec6_pcie->regmap))
return PTR_ERR(artpec6_pcie->regmap);
+ platform_set_drvdata(pdev, artpec6_pcie);
+
ret = artpec6_add_pcie_port(artpec6_pcie, pdev);
if (ret < 0)
return ret;
diff --git a/drivers/pci/dwc/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c
index 1a02038..bb58540 100644
--- a/drivers/pci/dwc/pcie-designware-plat.c
+++ b/drivers/pci/dwc/pcie-designware-plat.c
@@ -104,6 +104,8 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
if (IS_ERR(pp->dbi_base))
return PTR_ERR(pp->dbi_base);
+ platform_set_drvdata(pdev, dw_plat_pcie);
+
ret = dw_plat_add_pcie_port(pp, pdev);
if (ret < 0)
return ret;
diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
index a301a71..ecc1b08 100644
--- a/drivers/pci/dwc/pcie-hisi.c
+++ b/drivers/pci/dwc/pcie-hisi.c
@@ -287,6 +287,8 @@ static int hisi_pcie_probe(struct platform_device *pdev)
if (IS_ERR(pp->dbi_base))
return PTR_ERR(pp->dbi_base);
+ platform_set_drvdata(pdev, hisi_pcie);
+
ret = hisi_add_pcie_port(hisi_pcie, pdev);
if (ret)
return ret;
diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 1ecff2e..3f525cb 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -716,6 +716,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
if (ret)
return ret;
+ platform_set_drvdata(pdev, pcie);
+
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "cannot initialize host\n");
diff --git a/drivers/pci/dwc/pcie-spear13xx.c b/drivers/pci/dwc/pcie-spear13xx.c
index dafe8b8..5970566 100644
--- a/drivers/pci/dwc/pcie-spear13xx.c
+++ b/drivers/pci/dwc/pcie-spear13xx.c
@@ -270,11 +270,12 @@ static int spear13xx_pcie_probe(struct platform_device *pdev)
if (of_property_read_bool(np, "st,pcie-is-gen1"))
spear13xx_pcie->is_gen1 = true;
+ platform_set_drvdata(pdev, spear13xx_pcie);
+
ret = spear13xx_add_pcie_port(spear13xx_pcie, pdev);
if (ret < 0)
goto fail_clk;
- platform_set_drvdata(pdev, spear13xx_pcie);
return 0;
fail_clk:
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-02-15 13:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-15 13:18 [PATCH 00/10] PCI: dwc: Rework and cleanup designware driver Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 01/10] PCI: dwc: designware: Move the register defines to designware header file Kishon Vijay Abraham I
2017-02-16 14:49 ` Jingoo Han
2017-02-15 13:18 ` Kishon Vijay Abraham I [this message]
2017-02-15 13:18 ` [PATCH 03/10] PCI: dwc: *all*: Rename cfg_read/cfg_write to read/write Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 04/10] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init Kishon Vijay Abraham I
2017-02-15 13:18 ` [RFT PATCH 05/10] PCI: dwc: *all*: Split *struct pcie_port* into host only and core structures Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 06/10] PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 07/10] PCI: dwc: designware: Fix style errors in pcie-designware.c Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 08/10] PCI: dwc: Split pcie-designware.c into host and core files Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 09/10] PCI: dwc: Create a new config symbol to enable pci dwc host Kishon Vijay Abraham I
2017-02-15 13:18 ` [PATCH 10/10] PCI: dwc: Remove dependency of designware to CONFIG_PCI Kishon Vijay Abraham I
2017-02-15 23:00 ` [PATCH 00/10] PCI: dwc: Rework and cleanup designware driver Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487164699-30708-3-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=gabriele.paoloni@huawei.com \
--cc=hongxing.zhu@nxp.com \
--cc=jesper.nilsson@axis.com \
--cc=jingoohan1@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=m-karicheri2@ti.com \
--cc=minghuan.Lian@freescale.com \
--cc=mingkai.hu@freescale.com \
--cc=niklas.cassel@axis.com \
--cc=nsekhar@ti.com \
--cc=pratyush.anand@gmail.com \
--cc=svarbanov@mm-sol.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=tie-fei.zang@freescale.com \
--cc=wangzhou1@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).