From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jingoo Han , Joao Pinto Subject: [PATCH v2 20/22] Documentation: PCI: Add userguide for PCI endpoint test function Date: Fri, 17 Feb 2017 15:20:40 +0530 Message-ID: <1487325042-28227-21-git-send-email-kishon@ti.com> In-Reply-To: <1487325042-28227-1-git-send-email-kishon@ti.com> References: <1487325042-28227-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-pci@vger.kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, Kishon Vijay Abraham I , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+bjorn=helgaas.com@lists.infradead.org List-ID: Add documentation to help users use pci-epf-test function driver and pci_endpoint_test host driver for testing PCI. Signed-off-by: Kishon Vijay Abraham I --- Documentation/PCI/endpoint/pci-test-howto.txt | 167 +++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt new file mode 100644 index 0000000..4141b2b --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-howto.txt @@ -0,0 +1,167 @@ + PCI TEST USERGUIDE + Kishon Vijay Abraham I + +This document is a guide to help users use pci-epf-test function driver +and pci_endpoint_test host driver for testing PCI. The list of steps to +be followed in the host side and EP side is given below. + +1. Endpoint Device + +1.1 Endpoint Controller Devices + +To find the list of endpoint controller devices in the system: + + # ls /sys/class/pci_epc/ + 51000000.pcie_ep + +1.2 Endpoint Function Drivers + +To find the list of endpoint function drivers in the system: + + # ls /sys/bus/pci-epf/drivers + pci_epf_test + +1.3 Creating pci-epf-test Device + +PCI endpoint function device can be created using the configfs. To create +pci-epf-test device, the following commands can be used + + # mount -t configfs none /sys/kernel/config + # cd /sys/kernel/config/pci_ep/ + # mkdir dev + # mkdir dev/epf/pci_epf_test.0 + +The "mkdir dev/epf/pci_epf_test.0" above creates the pci-epf-test function +device. The name given to the directory preceding '.' should match with the +name of the driver listed in '/sys/bus/pci-epf/drivers' in order for the +device to be bound to the driver. + +The PCI endpoint framework populates the directory with configurable fields. + + # ls dev/epf/pci_epf_test.0/ + baseclass_code function revid vendorid + cache_line_size interrupt_pin subclass_code + deviceid peripheral subsys_id + epc progif_code subsys_vendor_id + +The pci endpoint function driver populates these entries with default values +when the device is bound to the driver. The pci-epf-test driver populates +vendorid with 0xffff and interrupt_pin with 0x0001 + + # cat dev/epf/pci_epf_test.0/vendorid + 0xffff + # cat dev/epf/pci_epf_test.0/interrupt_pin + 0x0001 + +1.4 Configuring pci-epf-test Device + +The user can configure the pci-epf-test device using configfs entry. In order +to change the vendorid and the number of MSI interrupts used by the function +device, the following commands can be used. + + # echo 0x104c > dev/epf/pci_epf_test.0/vendorid + # echo 0xb500 > dev/epf/pci_epf_test.0/deviceid + # echo 16 > dev/epf/pci_epf_test.0/msi_interrupts + +1.5 Binding pci-epf-test Device to EP Controller + +In order for the endpoint function device to be useful, it has to be bound to +a PCI endpoint controller driver. Use the configfs to bind the function +device to one of the controller driver present in the system. + + # echo "51000000.pcie_ep" > dev/epc + +Once the above step is completed, the PCI endpoint is ready to establish a link +with the host. + +2. Endpoint Device + +2.1 lspci Output + +Note that the devices listed here correspond to the value populated in 1.4 above + + 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01) + 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500 + +2.2 Using Endpoint Test function Device + +pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint +tests. Before pcitest.sh can be used pcitest.c should be compiled using the +following commands. + + cd + make headers_install ARCH=arm + arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest + cp pcitest /usr/sbin/ + cp tools/pci/pcitest.sh + +2.2.1 pcitest.sh Output + # ./pcitest.sh + BAR tests + + BAR0: OKAY + BAR1: OKAY + BAR2: OKAY + BAR3: OKAY + BAR4: NOT OKAY + BAR5: NOT OKAY + + Interrupt tests + + LEGACY IRQ: NOT OKAY + MSI1: OKAY + MSI2: OKAY + MSI3: OKAY + MSI4: OKAY + MSI5: OKAY + MSI6: OKAY + MSI7: OKAY + MSI8: OKAY + MSI9: OKAY + MSI10: OKAY + MSI11: OKAY + MSI12: OKAY + MSI13: OKAY + MSI14: OKAY + MSI15: OKAY + MSI16: OKAY + MSI17: NOT OKAY + MSI18: NOT OKAY + MSI19: NOT OKAY + MSI20: NOT OKAY + MSI21: NOT OKAY + MSI22: NOT OKAY + MSI23: NOT OKAY + MSI24: NOT OKAY + MSI25: NOT OKAY + MSI26: NOT OKAY + MSI27: NOT OKAY + MSI28: NOT OKAY + MSI29: NOT OKAY + MSI30: NOT OKAY + MSI31: NOT OKAY + MSI32: NOT OKAY + + Read Tests + + READ ( 1 bytes): OKAY + READ ( 1024 bytes): OKAY + READ ( 1025 bytes): OKAY + READ (1024000 bytes): OKAY + READ (1024001 bytes): OKAY + + Write Tests + + WRITE ( 1 bytes): OKAY + WRITE ( 1024 bytes): OKAY + WRITE ( 1025 bytes): OKAY + WRITE (1024000 bytes): OKAY + WRITE (1024001 bytes): OKAY + + Copy Tests + + COPY ( 1 bytes): OKAY + COPY ( 1024 bytes): OKAY + COPY ( 1025 bytes): OKAY + COPY (1024000 bytes): OKAY + COPY (1024001 bytes): OKAY -- 1.7.9.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel