[PATCH v7 0/2] add the Amlogic Meson PCIe controller driver

From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Hanjie Lin <hanjie.lin@amlogic.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Carlo Caione <carlo@caione.org>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Cyrille Pitchen <cyrille.pitchen@free-electrons.com>,
	<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	Yixun Lan <yixun.lan@amlogic.com>,
	Liang Yang <liang.yang@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Jian Hu <jian.hu@amlogic.com>, <devicetree@vger.kernel.org>
Subject: [PATCH v7 0/2] add the Amlogic Meson PCIe controller driver
Date: Thu, 6 Dec 2018 20:02:36 +0800	[thread overview]
Message-ID: <1544097760-85834-1-git-send-email-hanjie.lin@amlogic.com> (raw)

The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
PCI core. This patchset add the driver and dt-bindings of the controller.
Changes since v6: [5]
 - fix bad usage of ERR_PTR(ENXIO)
 - fix meson_pcie_rd_own_conf() when read PCI_CLASS_DEVICE reg 

Changes since v5: [4]
 - update MAINTAINER file in alphabetical order
 - remove meaningless comment
 - use ERR_PTR function instead of (void *) cast
 - use is_power_of_2(size) instead of size & (size - 1)
 - add comment for PCI_CLASS_REVISION register operation
 
Changes since v4: [3]
 - fix kbuild test robot and compile warnings

Changes since v3: [2]
 - modify subject format
 - update Kconfig
 - update MAINTAINER file
 - add comment and error handle for meson_pcie_get_mem_shared()
 - drop useless initialization code
 - add comment for meson_size_to_payload()
 - optimize meson_pcie_establish_link() return code
 - optimize meson_pcie_enable_interrupts() redundant function
 - drop device_attch related code
 - drop dw_pcie_ops read_dbi and write_dbi function
 - add error handle for meson_add_pcie_port() when probe

Changes since v2: [1]
 - abandon phy driver, move reset to the controller
 - use devm_add_action_or_reset() to use clock res
 - format correcting

Changes since v1: [0]
 - use gpio lib instead open code
 - move 'apb' and 'port' reset from phy driver
 - format correcting

[0] : https://lkml.kernel.org/r/1534227522-186798-1-git-send-email-hanjie.lin@amlogic.com
[1] : https://lkml.kernel.org/r/1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com
[2] : https://lkml.kernel.org/r/1537509820-52040-1-git-send-email-hanjie.lin@amlogic.com 
[3] : https://lkml.kernel.org/r/1538999834-156423-3-git-send-email-hanjie.lin@amlogic.com
[4] : https://lkml.kernel.org/r/1539049990-30810-1-git-send-email-hanjie.lin@amlogic.com
[5] : https://lkml.kernel.org/r/1542876836-191355-1-git-send-email-hanjie.lin@amlogic.com


Yue Wang (2):
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe
    controller
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver

 .../devicetree/bindings/pci/amlogic,meson-pcie.txt |  70 +++
 MAINTAINERS                                        |   7 +
 drivers/pci/controller/dwc/Kconfig                 |  10 +
 drivers/pci/controller/dwc/Makefile                |   1 +
 drivers/pci/controller/dwc/pci-meson.c             | 603 +++++++++++++++++++++
 5 files changed, 691 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
 create mode 100644 drivers/pci/controller/dwc/pci-meson.c

-- 
2.7.4