From: Pankaj Dubey <pankaj.dubey@samsung.com>
To: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bhelgaas@google.com, andrew.murray@arm.com,
lorenzo.pieralisi@arm.com, gustavo.pimentel@synopsys.com,
jingoohan1@gmail.com, vidyas@nvidia.com,
Anvesh Salveru <anvesh.s@samsung.com>,
Pankaj Dubey <pankaj.dubey@samsung.com>
Subject: [PATCH v2] PCI: dwc: Add support to add GEN3 related equalization quirks
Date: Mon, 14 Oct 2019 12:48:29 +0530 [thread overview]
Message-ID: <1571037509-20284-1-git-send-email-pankaj.dubey@samsung.com> (raw)
In-Reply-To: CGME20191014071838epcas5p2901e45c978e5a9d6dfbdde2dadea6d9d@epcas5p2.samsung.com
From: Anvesh Salveru <anvesh.s@samsung.com>
In some platforms, PCIe PHY may have issues which will prevent linkup
to happen in GEN3 or higher speed. In case equalization fails, link will
fallback to GEN1.
DesignWare controller gives flexibility to disable GEN3 equalization
completely or only phase 2 and 3 of equalization.
This patch enables the DesignWare driver to disable the PCIe GEN3
equalization by enabling one of the following quirks:
- DWC_EQUALIZATION_DISABLE: To disable GEN3 equalization all phases
- DWC_EQ_PHASE_2_3_DISABLE: To disable GEN3 equalization phase 2 & 3
Platform drivers can set these quirks via "quirk" variable of "dw_pcie"
struct.
Signed-off-by: Anvesh Salveru <anvesh.s@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
---
Changes w.r.t v1:
- Rebased on latest linus/master
- Added Reviewed-by and Acked-by
drivers/pci/controller/dwc/pcie-designware.c | 12 ++++++++++++
drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 820488d..e247d6d 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -556,4 +556,16 @@ void dw_pcie_setup(struct dw_pcie *pci)
PCIE_PL_CHK_REG_CHK_REG_START;
dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
}
+
+ if (pci->quirk & DWC_EQUALIZATION_DISABLE) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_GEN3_RELATED);
+ val |= PORT_LOGIC_GEN3_EQ_DISABLE;
+ dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
+ }
+
+ if (pci->quirk & DWC_EQ_PHASE_2_3_DISABLE) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_GEN3_RELATED);
+ val |= PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE;
+ dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
+ }
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 5a18e94..7d3fe6f 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -29,6 +29,10 @@
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU 9
+/* Parameters for GEN3 related quirks */
+#define DWC_EQUALIZATION_DISABLE BIT(1)
+#define DWC_EQ_PHASE_2_3_DISABLE BIT(2)
+
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK GENMASK(21, 16)
@@ -60,6 +64,10 @@
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
+#define PCIE_PORT_GEN3_RELATED 0x890
+#define PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE BIT(9)
+#define PORT_LOGIC_GEN3_EQ_DISABLE BIT(16)
+
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND BIT(31)
#define PCIE_ATU_REGION_OUTBOUND 0
@@ -253,6 +261,7 @@ struct dw_pcie {
struct dw_pcie_ep ep;
const struct dw_pcie_ops *ops;
unsigned int version;
+ unsigned int quirk;
};
#define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
--
2.7.4
next parent reply other threads:[~2019-10-14 7:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20191014071838epcas5p2901e45c978e5a9d6dfbdde2dadea6d9d@epcas5p2.samsung.com>
2019-10-14 7:18 ` Pankaj Dubey [this message]
2019-10-14 15:13 ` [PATCH v2] PCI: dwc: Add support to add GEN3 related equalization quirks Lorenzo Pieralisi
2019-10-15 2:58 ` Pankaj Dubey
[not found] <CGME20190913104018epcas5p3d93265a6786dc2b7b8a7d3231bfe9c14@epcas5p3.samsung.com>
2019-09-13 10:39 ` Pankaj Dubey
2019-09-16 9:16 ` Gustavo Pimentel
2019-09-16 10:15 ` Andrew Murray
2019-09-16 11:06 ` Pankaj Dubey
2019-09-16 12:24 ` Andrew Murray
2019-09-16 12:52 ` Gustavo Pimentel
2019-09-19 11:24 ` Vidya Sagar
2019-09-24 9:28 ` Pankaj Dubey
2019-09-24 11:27 ` Vidya Sagar
2019-09-24 12:11 ` Pankaj Dubey
2019-09-25 4:11 ` Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571037509-20284-1-git-send-email-pankaj.dubey@samsung.com \
--to=pankaj.dubey@samsung.com \
--cc=andrew.murray@arm.com \
--cc=anvesh.s@samsung.com \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).