From: Tiezhu Yang <yangtiezhu@loongson.cn>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Huacai Chen <chenhc@lemote.com>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Bjorn Helgaas <bhelgaas@google.com>, Jens Axboe <axboe@kernel.dk>
Cc: linux-mips@vger.kernel.org, linux-pci@vger.kernel.org,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
Xuefeng Li <lixuefeng@loongson.cn>
Subject: [PATCH 0/6] Add basic support for Loongson 7A1000 bridge chip
Date: Mon, 9 Mar 2020 16:23:20 +0800 [thread overview]
Message-ID: <1583742206-29163-1-git-send-email-yangtiezhu@loongson.cn> (raw)
The Loongson 7A1000 bridge chip has been released for several years
since the second half of 2017, but it is not supported by the Linux
mainline kernel while it only works well with the Loongson internal
kernel version. When I update the latest version of Linux mainline
kernel on the Loongson 3A3000 CPU and 7A1000 bridge chip system,
the boot process failed and I feel depressed.
The 7A1000 bridge chip is used a lot with 3A3000 or 3A4000 CPU in
the most Loongson desktop and sever products, it is important to
support Loongson 7A1000 bridge chip by the Linux mainline kernel.
This patch series adds the basic support for the Loongson 7A1000
bridge chip, when apply these patches based on linux-5.6-rc5, the
boot process is successful and we can login normally used with the
latest firmware and discrete graphics card, the next work to do is
power management and some other controller device drivers.
Additionally, when I git clone mips code [1], the speed is too slow
and clone always failed, so this patch series is based on the latest
linux-5.6-rc5 [2].
If you have any questions and suggestions, please let me know.
Thanks,
Tiezhu Yang
[1] git clone https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
[2] git clone https://github.com/torvalds/linux.git
Tiezhu Yang (6):
PCI: Add Loongson vendor ID and 7A1000 device IDs
AHCI: Add support for Loongson 7A1000 SATA controller
MIPS: Loongson: Use firmware arguments to get board name
MIPS: Loongson: Add DMA support for 7A1000
MIPS: Loongson: Add PCI support for 7A1000
MIPS: Loongson: Add support for 7A1000 interrupt controller
arch/mips/include/asm/mach-loongson64/boot_param.h | 2 +
arch/mips/include/asm/mach-loongson64/ioaicu.h | 166 +++++++++++
arch/mips/include/asm/mach-loongson64/irq.h | 2 +
arch/mips/include/asm/mach-loongson64/pci.h | 1 +
arch/mips/loongson64/Makefile | 2 +-
arch/mips/loongson64/dma.c | 49 +++-
arch/mips/loongson64/env.c | 5 +
arch/mips/loongson64/init.c | 13 +
arch/mips/loongson64/ioaicu.c | 305 +++++++++++++++++++++
arch/mips/loongson64/irq.c | 20 +-
arch/mips/loongson64/pci.c | 12 +-
arch/mips/loongson64/smp.c | 11 +-
arch/mips/pci/Makefile | 2 +-
arch/mips/pci/ops-loongson3-ls7a.c | 132 +++++++++
drivers/ata/ahci.c | 8 +
include/linux/pci_ids.h | 18 ++
16 files changed, 733 insertions(+), 15 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson64/ioaicu.h
create mode 100644 arch/mips/loongson64/ioaicu.c
create mode 100644 arch/mips/pci/ops-loongson3-ls7a.c
--
2.1.0
next reply other threads:[~2020-03-09 8:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-09 8:23 Tiezhu Yang [this message]
2020-03-09 8:23 ` [PATCH 1/6] PCI: Add Loongson vendor ID and 7A1000 device IDs Tiezhu Yang
2020-03-09 8:50 ` 回复:[PATCH " Jiaxun Yang
2020-03-10 2:31 ` Tiezhu Yang
2020-03-10 2:37 ` Jiaxun Yang
2020-03-10 9:28 ` Tiezhu Yang
2020-03-09 8:23 ` [PATCH 2/6] AHCI: Add support for Loongson 7A1000 SATA controller Tiezhu Yang
2020-03-09 8:23 ` [PATCH 3/6] MIPS: Loongson: Use firmware arguments to get board name Tiezhu Yang
2020-03-09 8:36 ` 回复:[PATCH " Jiaxun Yang
2020-03-10 2:38 ` Tiezhu Yang
2020-03-09 8:23 ` [PATCH 4/6] MIPS: Loongson: Add DMA support for 7A1000 Tiezhu Yang
2020-03-09 8:44 ` 回复:[PATCH " Jiaxun Yang
2020-03-10 2:40 ` Tiezhu Yang
2020-03-13 8:24 ` [PATCH " Christoph Hellwig
2020-03-13 9:03 ` Tiezhu Yang
2020-03-09 8:23 ` [PATCH 5/6] MIPS: Loongson: Add PCI " Tiezhu Yang
2020-03-09 8:47 ` 回复:[PATCH " Jiaxun Yang
2020-03-10 3:03 ` Tiezhu Yang
2020-03-09 8:23 ` [PATCH 6/6] MIPS: Loongson: Add support for 7A1000 interrupt controller Tiezhu Yang
2020-03-09 9:07 ` 回复:[PATCH " Jiaxun Yang
2020-03-10 4:28 ` Tiezhu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583742206-29163-1-git-send-email-yangtiezhu@loongson.cn \
--to=yangtiezhu@loongson.cn \
--cc=axboe@kernel.dk \
--cc=bhelgaas@google.com \
--cc=chenhc@lemote.com \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lixuefeng@loongson.cn \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).