From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
bhelgaas@google.com, robh+dt@kernel.org, kishon@ti.com,
vkoul@kernel.org, svarbanov@mm-sol.com,
lorenzo.pieralisi@arm.com, p.zabel@pengutronix.de,
sivaprak@codeaurora.org, mgautam@codeaurora.org,
smuthayy@codeaurora.org, varada@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Subject: [PATCH V2 4/7] phy: qcom-qmp: Add compatible for ipq8074 PCIe Gen3 qmp phy
Date: Wed, 29 Jul 2020 21:00:04 +0530 [thread overview]
Message-ID: <1596036607-11877-5-git-send-email-sivaprak@codeaurora.org> (raw)
In-Reply-To: <1596036607-11877-1-git-send-email-sivaprak@codeaurora.org>
ipq8074 has two PCIe ports, One Gen2 and one Gen3 ports.
Since support for Gen2 phy is already available, add support for
PCIe Gen3 phy.
Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
[V2]
* Addressed review comments from Vinod
drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h | 139 ++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.c | 171 +++++++++++++++++++++++++++++-
2 files changed, 308 insertions(+), 2 deletions(-)
create mode 100644 drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h
diff --git a/drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h b/drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h
new file mode 100644
index 0000000..812ee75
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0
+ */
+
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef PHY_QCOM_PCIE_H
+
+/* QMP V2 PCIE PHY - Found in IPQ8074 gen3 port - QSERDES PLL registers */
+#define QSERDES_PLL_BG_TIMER 0x00c
+#define QSERDES_PLL_SSC_PER1 0x01c
+#define QSERDES_PLL_SSC_PER2 0x020
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE0 0x024
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE0 0x028
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE1 0x02c
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE1 0x030
+#define QSERDES_PLL_BIAS_EN_CLKBUFLR_EN 0x03c
+#define QSERDES_PLL_CLK_ENABLE1 0x040
+#define QSERDES_PLL_SYS_CLK_CTRL 0x044
+#define QSERDES_PLL_SYSCLK_BUF_ENABLE 0x048
+#define QSERDES_PLL_PLL_IVCO 0x050
+#define QSERDES_PLL_LOCK_CMP1_MODE0 0x054
+#define QSERDES_PLL_LOCK_CMP2_MODE0 0x058
+#define QSERDES_PLL_LOCK_CMP1_MODE1 0x060
+#define QSERDES_PLL_LOCK_CMP2_MODE1 0x064
+#define QSERDES_PLL_BG_TRIM 0x074
+#define QSERDES_PLL_CLK_EP_DIV_MODE0 0x078
+#define QSERDES_PLL_CLK_EP_DIV_MODE1 0x07c
+#define QSERDES_PLL_CP_CTRL_MODE0 0x080
+#define QSERDES_PLL_CP_CTRL_MODE1 0x084
+#define QSERDES_PLL_PLL_RCTRL_MODE0 0x088
+#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08C
+#define QSERDES_PLL_PLL_CCTRL_MODE0 0x090
+#define QSERDES_PLL_PLL_CCTRL_MODE1 0x094
+#define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM 0x0a4
+#define QSERDES_PLL_SYSCLK_EN_SEL 0x0a8
+#define QSERDES_PLL_RESETSM_CNTRL 0x0b0
+#define QSERDES_PLL_LOCK_CMP_EN 0x0c4
+#define QSERDES_PLL_DEC_START_MODE0 0x0cc
+#define QSERDES_PLL_DEC_START_MODE1 0x0d0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE0 0x0d8
+#define QSERDES_PLL_DIV_FRAC_START2_MODE0 0x0dc
+#define QSERDES_PLL_DIV_FRAC_START3_MODE0 0x0e0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE1 0x0e4
+#define QSERDES_PLL_DIV_FRAC_START2_MODE1 0x0e8
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0eC
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0 0x100
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0 0x104
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1 0x108
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE1 0x10c
+#define QSERDES_PLL_VCO_TUNE_MAP 0x120
+#define QSERDES_PLL_VCO_TUNE1_MODE0 0x124
+#define QSERDES_PLL_VCO_TUNE2_MODE0 0x128
+#define QSERDES_PLL_VCO_TUNE1_MODE1 0x12c
+#define QSERDES_PLL_VCO_TUNE2_MODE1 0x130
+#define QSERDES_PLL_VCO_TUNE_TIMER1 0x13c
+#define QSERDES_PLL_VCO_TUNE_TIMER2 0x140
+#define QSERDES_PLL_CLK_SELECT 0x16c
+#define QSERDES_PLL_HSCLK_SEL 0x170
+#define QSERDES_PLL_CORECLK_DIV 0x17c
+#define QSERDES_PLL_CORE_CLK_EN 0x184
+#define QSERDES_PLL_CMN_CONFIG 0x18c
+#define QSERDES_PLL_SVS_MODE_CLK_SEL 0x194
+#define QSERDES_PLL_CORECLK_DIV_MODE1 0x1b4
+
+/* QMP V2 PCIE PHY - Found in IPQ8074 gen3 port - - QSERDES TX registers */
+#define QSERDES_TX0_RES_CODE_LANE_OFFSET_TX 0x03c
+#define QSERDES_TX0_HIGHZ_DRVR_EN 0x058
+#define QSERDES_TX0_LANE_MODE_1 0x084
+#define QSERDES_TX0_RCV_DETECT_LVL_2 0x09c
+
+/* QMP V2 PCIE PHY - Found in IPQ8074 gen3 port - QSERDES RX registers */
+#define QSERDES_RX0_UCDR_FO_GAIN 0x008
+#define QSERDES_RX0_UCDR_SO_GAIN 0x014
+#define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE 0x034
+#define QSERDES_RX0_UCDR_PI_CONTROLS 0x044
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2 0x0ec
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3 0x0f0
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4 0x0f4
+#define QSERDES_RX0_RX_IDAC_TSETTLE_LOW 0x0f8
+#define QSERDES_RX0_RX_IDAC_TSETTLE_HIGH 0x0fc
+#define QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
+#define QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2 0x114
+#define QSERDES_RX0_SIGDET_ENABLES 0x118
+#define QSERDES_RX0_SIGDET_CNTRL 0x11c
+#define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL 0x124
+#define QSERDES_RX0_RX_MODE_00_LOW 0x170
+#define QSERDES_RX0_RX_MODE_00_HIGH 0x174
+#define QSERDES_RX0_RX_MODE_00_HIGH2 0x178
+#define QSERDES_RX0_RX_MODE_00_HIGH3 0x17c
+#define QSERDES_RX0_RX_MODE_00_HIGH4 0x180
+#define QSERDES_RX0_RX_MODE_01_LOW 0x184
+#define QSERDES_RX0_RX_MODE_01_HIGH 0x188
+#define QSERDES_RX0_RX_MODE_01_HIGH2 0x18c
+#define QSERDES_RX0_RX_MODE_01_HIGH3 0x190
+#define QSERDES_RX0_RX_MODE_01_HIGH4 0x194
+#define QSERDES_RX0_RX_MODE_10_LOW 0x198
+#define QSERDES_RX0_RX_MODE_10_HIGH 0x19c
+#define QSERDES_RX0_RX_MODE_10_HIGH2 0x1a0
+#define QSERDES_RX0_RX_MODE_10_HIGH3 0x1a4
+#define QSERDES_RX0_RX_MODE_10_HIGH4 0x1a8
+#define QSERDES_RX0_DFE_EN_TIMER 0x1b4
+
+/* QMP V2 PCIE PHY - Found in IPQ8074 gen3 port - PCS registers */
+
+#define PCS_COM_FLL_CNTRL1 0x098
+#define PCS_COM_FLL_CNTRL2 0x09c
+#define PCS_COM_FLL_CNT_VAL_L 0x0a0
+#define PCS_COM_FLL_CNT_VAL_H_TOL 0x0a4
+#define PCS_COM_FLL_MAN_CODE 0x0a8
+#define PCS_COM_REFGEN_REQ_CONFIG1 0x0dc
+#define PCS_COM_G12S1_TXDEEMPH_M3P5DB 0x16c
+#define PCS_COM_RX_SIGDET_LVL 0x188
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L 0x1a4
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H 0x1a8
+#define PCS_COM_RX_DCC_CAL_CONFIG 0x1d8
+#define PCS_COM_EQ_CONFIG5 0x1ec
+
+/* QMP V2 PCIE PHY - Found in IPQ8074 gen3 port - PCS Misc registers */
+
+#define PCS_PCIE_POWER_STATE_CONFIG2 0x40c
+#define PCS_PCIE_POWER_STATE_CONFIG4 0x414
+#define PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x41c
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L 0x440
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H 0x444
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L 0x448
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H 0x44c
+#define PCS_PCIE_OSC_DTCT_CONFIG2 0x45c
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG2 0x478
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG4 0x480
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG5 0x484
+#define PCS_PCIE_OSC_DTCT_ACTIONS 0x490
+#define PCS_PCIE_EQ_CONFIG1 0x4a0
+#define PCS_PCIE_EQ_CONFIG2 0x4a4
+#define PCS_PCIE_PRESET_P10_PRE 0x4bc
+#define PCS_PCIE_PRESET_P10_POST 0x4e0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 6e6f992..645f604 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -23,6 +23,7 @@
#include <dt-bindings/phy/phy.h>
#include "phy-qcom-qmp.h"
+#include "phy-qcom-pcie3-qmp.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
@@ -676,6 +677,132 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
};
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+};
static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -2083,6 +2210,36 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.pwrdn_delay_max = 1005, /* us */
};
+static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_gen3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
+ .rx_tbl = ipq8074_pcie_gen3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 1,
@@ -3024,8 +3181,15 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
init.ops = &clk_fixed_rate_ops;
- /* controllers using QMP phys use 125MHz pipe clock interface */
- fixed->fixed_rate = 125000000;
+ /*
+ * controllers using QMP phys use 125MHz pipe clock interface unless
+ * other frequency is specified in dts
+ */
+ ret = of_property_read_u32(np, "clock-output-rate",
+ (u32 *)&fixed->fixed_rate);
+ if (ret)
+ fixed->fixed_rate = 125000000;
+
fixed->hw.init = &init;
ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
@@ -3196,6 +3360,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
}, {
+ .compatible = "qcom,ipq8074-qmp-pcie-gen3-phy",
+ .data = &ipq8074_pciephy_gen3_cfg,
+ }, {
.compatible = "qcom,sc7180-qmp-usb3-phy",
.data = &sc7180_usb3phy_cfg,
}, {
--
2.7.4
next prev parent reply other threads:[~2020-07-29 15:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 15:30 [PATCH V2 0/7] Add PCIe support for IPQ8074 Sivaprakash Murugesan
2020-07-29 15:30 ` [PATCH V2 1/7] dt-bindings: PCI: qcom: Add ipq8074 Gen3 PCIe compatible Sivaprakash Murugesan
2020-08-23 15:32 ` Vinod Koul
2020-07-29 15:30 ` [PATCH V2 2/7] dt-bindings: phy: qcom,qmp: Add ipq8074 PCIe Gen3 phy Sivaprakash Murugesan
2020-07-29 15:30 ` [PATCH V2 3/7] phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init Sivaprakash Murugesan
2020-08-23 15:50 ` Vinod Koul
2020-07-29 15:30 ` Sivaprakash Murugesan [this message]
2020-08-23 15:44 ` [PATCH V2 4/7] phy: qcom-qmp: Add compatible for ipq8074 PCIe Gen3 qmp phy Vinod Koul
2020-07-29 15:30 ` [PATCH V2 5/7] PCI: qcom: Do PHY power on before PCIe init Sivaprakash Murugesan
2020-08-23 15:46 ` Vinod Koul
2020-07-29 15:30 ` [PATCH V2 6/7] PCI: qcom: Add ipq8074 PCIe controller support Sivaprakash Murugesan
2020-09-30 18:13 ` Rob Herring
2020-07-29 15:30 ` [PATCH V2 7/7] arm64: dts: ipq8074: Fixup PCIe dts nodes Sivaprakash Murugesan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596036607-11877-5-git-send-email-sivaprak@codeaurora.org \
--to=sivaprak@codeaurora.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mgautam@codeaurora.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=smuthayy@codeaurora.org \
--cc=speriaka@codeaurora.org \
--cc=svarbanov@mm-sol.com \
--cc=varada@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).