linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hongtao Wu <wuht06@gmail.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Billows Wu <billows.wu@unisoc.com>
Subject: [PATCH 1/2] dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller
Date: Fri, 21 Aug 2020 17:51:48 +0800	[thread overview]
Message-ID: <1598003509-27896-2-git-send-email-wuht06@gmail.com> (raw)
In-Reply-To: <1598003509-27896-1-git-send-email-wuht06@gmail.com>

From: Billows Wu <billows.wu@unisoc.com>

This series adds PCIe bindings for Uisoc SoCs.
This controller is based on DesignWare PCIe IP.

Signed-off-by: Billows Wu <billows.wu@unisoc.com>
---
 .../devicetree/bindings/pci/sprd-pcie.yaml         | 88 ++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/sprd-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/sprd-pcie.yaml b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml
new file mode 100644
index 0000000..6eab4b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sprd-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SoC PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Billows Wu <billows.wu@unisoc.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: "sprd-pcie.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: sprd,pcie
+      - const: sprd,pcie-ep
+
+  reg:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe shadow registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: cfg
+
+  ranges:
+    maxItems: 2
+
+  num-lanes:
+    maxItems: 1
+    description: Number of lanes to use for this port.
+
+  num-ib-windows:
+    maxItems: 1
+    description: Number of inbound windows to use for this port.
+
+  num-ob-windows:
+    maxItems: 1
+    description: Number of outbound windows to use for this port.
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - num-lanes
+  - ranges
+  - bus-range
+  - interrupts
+  - interrupt-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie0@2b100000 {
+        compatible = "sprd,pcie", "snps,dw-pcie";
+        reg = <0x0 0x2b100000 0x0 0x2000>,
+              <0x2 0x00000000 0x0 0x2000>;
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x01000000 0x0 0x00000000 0x2 0x00002000 0x0 0x00010000
+                  0x03000000 0x0 0x10000000 0x2 0x10000000 0x1 0xefffffff>;
+        bus-range = <0  15>;
+        num-lanes = <1>;
+        num-viewport = <8>;
+        interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+    };
--
2.7.4


  reply	other threads:[~2020-08-21  9:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-21  9:51 [PATCH 0/2] PCI: Add new Unisoc PCIe driver Hongtao Wu
2020-08-21  9:51 ` Hongtao Wu [this message]
2020-08-21 22:11   ` [PATCH 1/2] dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller Rob Herring
2020-08-21  9:51 ` [PATCH 2/2] PCI: sprd: Add support for Unisoc SoCs' PCIe controller Hongtao Wu
2020-08-21 15:15   ` Randy Dunlap
2020-08-21 22:21   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1598003509-27896-2-git-send-email-wuht06@gmail.com \
    --to=wuht06@gmail.com \
    --cc=baolin.wang7@gmail.com \
    --cc=billows.wu@unisoc.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=orsonzhai@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).