linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dongdong Liu <liudongdong3@huawei.com>
To: <helgaas@kernel.org>, <hch@infradead.org>, <kw@linux.com>,
	<linux-pci@vger.kernel.org>, <rajur@chelsio.com>,
	<hverkuil-cisco@xs4all.nl>
Cc: <linux-media@vger.kernel.org>, <netdev@vger.kernel.org>
Subject: [PATCH V5 4/6] PCI: Enable 10-Bit tag support for PCIe Endpoint devices
Date: Mon, 21 Jun 2021 18:27:20 +0800	[thread overview]
Message-ID: <1624271242-111890-5-git-send-email-liudongdong3@huawei.com> (raw)
In-Reply-To: <1624271242-111890-1-git-send-email-liudongdong3@huawei.com>

10-Bit Tag capability, introduced in PCIe-4.0 increases the total Tag
field size from 8 bits to 10 bits.

For platforms where the RC supports 10-Bit Tag Completer capability,
it is highly recommended for platform firmware or operating software
that configures PCIe hierarchies to Set the 10-Bit Tag Requester Enable
bit automatically in Endpoints with 10-Bit Tag Requester capability. This
enables the important class of 10-Bit Tag capable adapters that send
Memory Read Requests only to host memory.

Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 drivers/pci/probe.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/pci.h |  2 ++
 2 files changed, 35 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 0208865..33241fb 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2048,6 +2048,38 @@ int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
 	return 0;
 }
 
+static void pci_configure_10bit_tags(struct pci_dev *dev)
+{
+	struct pci_dev *bridge;
+
+	if (!(dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_COMP))
+		return;
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
+		dev->ext_10bit_tag = 1;
+		return;
+	}
+
+	bridge = pci_upstream_bridge(dev);
+	if (bridge && bridge->ext_10bit_tag)
+		dev->ext_10bit_tag = 1;
+
+	/*
+	 * 10-Bit Tag Requester Enable in Device Control 2 Register is RsvdP
+	 * for VF.
+	 */
+	if (dev->is_virtfn)
+		return;
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT &&
+	    dev->ext_10bit_tag == 1 &&
+	    (dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_REQ)) {
+		pci_dbg(dev, "enabling 10-Bit Tag Requester\n");
+		pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
+					PCI_EXP_DEVCTL2_10BIT_TAG_REQ_EN);
+	}
+}
+
 /**
  * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
  * @dev: PCI device to query
@@ -2184,6 +2216,7 @@ static void pci_configure_device(struct pci_dev *dev)
 {
 	pci_configure_mps(dev);
 	pci_configure_extended_tags(dev, NULL);
+	pci_configure_10bit_tags(dev);
 	pci_configure_relaxed_ordering(dev);
 	pci_configure_ltr(dev);
 	pci_configure_eetlp_prefix(dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index de1fc24..445d102 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -393,6 +393,8 @@ struct pci_dev {
 #endif
 	unsigned int	eetlp_prefix_path:1;	/* End-to-End TLP Prefix */
 
+	unsigned int	ext_10bit_tag:1; /* 10-Bit Tag Completer Supported
+					    from root to here */
 	pci_channel_state_t error_state;	/* Current connectivity state */
 	struct device	dev;			/* Generic device interface */
 
-- 
2.7.4


  parent reply	other threads:[~2021-06-21 10:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-21 10:27 [PATCH V5 0/6] PCI: Enable 10-Bit tag support for PCIe devices Dongdong Liu
2021-06-21 10:27 ` [PATCH V5 1/6] PCI: Use cached Device Capabilities Register Dongdong Liu
2021-06-21 10:27 ` [PATCH V5 2/6] PCI: Use cached Device Capabilities 2 Register Dongdong Liu
2021-06-22  6:17   ` Christoph Hellwig
2021-06-21 10:27 ` [PATCH V5 3/6] PCI: Add 10-Bit Tag register definitions Dongdong Liu
2021-06-21 10:27 ` Dongdong Liu [this message]
2021-07-15 17:23   ` [PATCH V5 4/6] PCI: Enable 10-Bit tag support for PCIe Endpoint devices Bjorn Helgaas
2021-07-16 11:12     ` Dongdong Liu
2021-07-16 14:17       ` Bjorn Helgaas
2021-07-17  8:50         ` Dongdong Liu
2021-07-16 15:51       ` Logan Gunthorpe
2021-07-17  9:41         ` Dongdong Liu
2021-06-21 10:27 ` [PATCH V5 5/6] PCI/IOV: Enable 10-Bit tag support for PCIe VF devices Dongdong Liu
2021-06-21 10:27 ` [PATCH V5 6/6] PCI: Enable 10-Bit tag support for PCIe RP devices Dongdong Liu
2021-06-22  6:19   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1624271242-111890-5-git-send-email-liudongdong3@huawei.com \
    --to=liudongdong3@huawei.com \
    --cc=hch@infradead.org \
    --cc=helgaas@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=kw@linux.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rajur@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).