linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, broonie@kernel.org,
	lorenzo.pieralisi@arm.com, jingoohan1@gmail.com,
	festevam@gmail.com
Cc: hongxing.zhu@nxp.com, stable@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de
Subject: [PATCH v5 1/6] PCI: imx6: Encapsulate the clock enable into one standalone function
Date: Wed,  5 Jan 2022 15:43:17 +0800	[thread overview]
Message-ID: <1641368602-20401-2-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1641368602-20401-1-git-send-email-hongxing.zhu@nxp.com>

No function changes, just encapsulate the i.MX PCIe clocks enable
operations into one standalone function

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++-----------
 1 file changed, 48 insertions(+), 31 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index cf139e02c376..1d324fd05d7f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -481,38 +481,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
 	return ret;
 }
 
-static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
-{
-	u32 val;
-	struct device *dev = imx6_pcie->pci->dev;
-
-	if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
-				     IOMUXC_GPR22, val,
-				     val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
-				     PHY_PLL_LOCK_WAIT_USLEEP_MAX,
-				     PHY_PLL_LOCK_WAIT_TIMEOUT))
-		dev_err(dev, "PCIe PLL lock timeout\n");
-}
-
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
 	int ret;
 
-	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
-		ret = regulator_enable(imx6_pcie->vpcie);
-		if (ret) {
-			dev_err(dev, "failed to enable vpcie regulator: %d\n",
-				ret);
-			return;
-		}
-	}
-
 	ret = clk_prepare_enable(imx6_pcie->pcie_phy);
 	if (ret) {
 		dev_err(dev, "unable to enable pcie_phy clock\n");
-		goto err_pcie_phy;
+		return ret;
 	}
 
 	ret = clk_prepare_enable(imx6_pcie->pcie_bus);
@@ -543,6 +521,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	}
 	/* allow the clocks to stabilize */
 	usleep_range(200, 500);
+	return 0;
+
+err_ref_clk:
+	clk_disable_unprepare(imx6_pcie->pcie);
+err_pcie:
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+err_pcie_bus:
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+
+	return ret;
+}
+
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+{
+	u32 val;
+	struct device *dev = imx6_pcie->pci->dev;
+
+	if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
+				     IOMUXC_GPR22, val,
+				     val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
+				     PHY_PLL_LOCK_WAIT_USLEEP_MAX,
+				     PHY_PLL_LOCK_WAIT_TIMEOUT))
+		dev_err(dev, "PCIe PLL lock timeout\n");
+}
+
+static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+{
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+	int ret;
+
+	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+		ret = regulator_enable(imx6_pcie->vpcie);
+		if (ret) {
+			dev_err(dev, "failed to enable vpcie regulator: %d\n",
+				ret);
+			return;
+		}
+	}
+
+	ret = imx6_pcie_clk_enable(imx6_pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie clocks\n");
+		goto err_clks;
+	}
 
 	/* Some boards don't have PCIe reset GPIO. */
 	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
@@ -601,13 +624,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 
 	return;
 
-err_ref_clk:
-	clk_disable_unprepare(imx6_pcie->pcie);
-err_pcie:
-	clk_disable_unprepare(imx6_pcie->pcie_bus);
-err_pcie_bus:
-	clk_disable_unprepare(imx6_pcie->pcie_phy);
-err_pcie_phy:
+err_clks:
 	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
 		ret = regulator_disable(imx6_pcie->vpcie);
 		if (ret)
-- 
2.25.1


  reply	other threads:[~2022-01-05  8:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05  7:43 [PATCH v5 0/6] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2022-01-05  7:43 ` Richard Zhu [this message]
2022-01-05  7:43 ` [PATCH v5 2/6] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-01-05  7:43 ` [PATCH v5 3/6] PCI: imx6: PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-01-05 19:04   ` Bjorn Helgaas
2022-01-06  3:49     ` Hongxing Zhu
2022-01-05  7:43 ` [PATCH v5 4/6] PCI: dwc: Add dw_pcie_host_ops.host_exit() callback Richard Zhu
2022-01-05  7:43 ` [PATCH v5 5/6] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2022-01-05 21:51   ` Fabio Estevam
2022-01-06  3:49     ` Hongxing Zhu
2022-01-06 10:38       ` Fabio Estevam
2022-01-05  7:43 ` [PATCH v5 6/6] PCI: imx6: Add the compliance tests mode support Richard Zhu
2022-01-05 10:15 ` [PATCH v5 0/6] PCI: imx6: refine codes and add " Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1641368602-20401-2-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).