linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, broonie@kernel.org,
	lorenzo.pieralisi@arm.com, jingoohan1@gmail.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v7 5/8] PCI: imx6: Refine the regulator usage
Date: Wed, 16 Feb 2022 14:21:00 +0800	[thread overview]
Message-ID: <1644992463-14467-6-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1644992463-14467-1-git-send-email-hongxing.zhu@nxp.com>

The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().

To keep the balance of the regulator usage counter, disable the regulator
just behind of imx6_pcie_assert_core_reset() in resume and shutdown.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 0aca762d88a3..242d8ef73c1e 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -369,8 +369,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
 
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
-	struct device *dev = imx6_pcie->pci->dev;
-
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 	case IMX8MQ:
@@ -400,14 +398,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
 		break;
 	}
-
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
-		int ret = regulator_disable(imx6_pcie->vpcie);
-
-		if (ret)
-			dev_err(dev, "failed to disable vpcie regulator: %d\n",
-				ret);
-	}
 }
 
 static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
@@ -583,7 +573,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	struct device *dev = pci->dev;
 	int ret, err;
 
-	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_enable(imx6_pcie->vpcie);
 		if (ret) {
 			dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -656,7 +646,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	return 0;
 
 err_clks:
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_disable(imx6_pcie->vpcie);
 		if (ret)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1028,6 +1018,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 		return 0;
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+
 	imx6_pcie_init_phy(imx6_pcie);
 	imx6_pcie_deassert_core_reset(imx6_pcie);
 	dw_pcie_setup_rc(pp);
@@ -1261,6 +1254,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 
 	/* bring down link, so bootloader gets clean state in case of reboot */
 	imx6_pcie_assert_core_reset(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
 }
 
 static const struct imx6_pcie_drvdata drvdata[] = {
-- 
2.25.1


  parent reply	other threads:[~2022-02-16  7:07 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-16  6:20 [PATCH v7 0/8] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2022-02-16  6:20 ` [PATCH v7 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-02-16  6:20 ` [PATCH v7 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-02-16  6:20 ` [PATCH v7 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-02-16  6:20 ` [PATCH v7 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-02-16  6:21 ` Richard Zhu [this message]
2022-02-16  6:21 ` [PATCH v7 6/8] PCI: dwc: Add dw_pcie_host_ops.host_exit() callback Richard Zhu
2022-02-23 17:49   ` Bjorn Helgaas
2022-02-24  7:50     ` Hongxing Zhu
2022-02-16  6:21 ` [PATCH v7 7/8] PCI: imx6: Disable enabled clocks and regulators after link is down Richard Zhu
2022-02-23 17:50   ` Bjorn Helgaas
2022-02-24  7:51     ` Hongxing Zhu
2022-02-16  6:21 ` [PATCH v7 8/8] PCI: imx6: Add the compliance tests mode support Richard Zhu
2022-02-23 17:40   ` Bjorn Helgaas
2022-02-24  7:50     ` Hongxing Zhu
2022-02-24 23:54       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1644992463-14467-6-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).