From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, lorenzo.pieralisi@arm.com
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH] PCI: imx6: Override the CLKREQ low in the initialization
Date: Wed, 23 Feb 2022 16:38:33 +0800 [thread overview]
Message-ID: <1645605513-7731-1-git-send-email-hongxing.zhu@nxp.com> (raw)
The CLKREQ# signal is an open drain, active low signal that is driven
low by the remote Endpoint device. But it might not be driven low if no
Endpoint device is connected.
On i.MX8MM PCIe, phy_init() would be failed and system boot hang if the
reference clock is not toggled.
Follow with i.MX8MQ PCIe, to make sure the reference clock on, override
the CLKREQ# low during initialization to fix this issue.
Fixes: 178e244cb6e2 ("PCI: imx: Add the imx8mm pcie support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d7f0db01f3c3..a334341a1789 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -447,10 +447,6 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
case IMX7D:
break;
case IMX8MM:
- ret = clk_prepare_enable(imx6_pcie->pcie_aux);
- if (ret)
- dev_err(dev, "unable to enable pcie_aux clock\n");
- break;
case IMX8MQ:
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
if (ret) {
--
2.25.1
next reply other threads:[~2022-02-23 8:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-23 8:38 Richard Zhu [this message]
2022-02-23 18:31 ` [PATCH] PCI: imx6: Override the CLKREQ low in the initialization Bjorn Helgaas
2022-02-24 2:04 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1645605513-7731-1-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=bhelgaas@google.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).