From: Richard Zhu <hongxing.zhu@nxp.com>
To: frank.li@nxp.com, l.stach@pengutronix.de, shawnguo@kernel.org,
lpieralisi@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: [PATCH v4 7/9] PCI: imx6: Add i.MX6Q and i.MX6QP PCIe EP supports
Date: Mon, 14 Aug 2023 13:42:45 +0800 [thread overview]
Message-ID: <1691991767-15809-8-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1691991767-15809-1-git-send-email-hongxing.zhu@nxp.com>
Add i.MX6Q and i.MX6QP PCIe EP supports.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 59 +++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 27aaa2a6bf39..9a6531ddfef2 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -46,8 +46,10 @@
enum imx6_pcie_variants {
IMX6Q,
+ IMX6Q_EP,
IMX6SX,
IMX6QP,
+ IMX6QP_EP,
IMX7D,
IMX8MQ,
IMX8MM,
@@ -67,6 +69,7 @@ struct imx6_pcie_drvdata {
u32 flags;
int dbi_length;
const char *gpr;
+ const struct pci_epc_features *epc_features;
};
struct imx6_pcie {
@@ -567,7 +570,9 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
break;
case IMX6QP:
+ case IMX6QP_EP:
case IMX6Q:
+ case IMX6Q_EP:
/* power up core phy and enable ref clock */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
@@ -619,7 +624,9 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
break;
case IMX6QP:
+ case IMX6QP_EP:
case IMX6Q:
+ case IMX6Q_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
@@ -720,11 +727,13 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
IMX6SX_GPR5_PCIE_BTNRST_RESET);
break;
case IMX6QP:
+ case IMX6QP_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_SW_RST,
IMX6Q_GPR1_PCIE_SW_RST);
break;
case IMX6Q:
+ case IMX6Q_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
@@ -777,12 +786,14 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
break;
case IMX6QP:
+ case IMX6QP_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_SW_RST, 0);
usleep_range(200, 500);
break;
case IMX6Q: /* Nothing to do */
+ case IMX6Q_EP:
case IMX8MM:
case IMX8MM_EP:
case IMX8MP:
@@ -827,8 +838,10 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
switch (imx6_pcie->drvdata->variant) {
case IMX6Q:
+ case IMX6Q_EP:
case IMX6SX:
case IMX6QP:
+ case IMX6QP_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2,
IMX6Q_GPR12_PCIE_CTL_2);
@@ -851,8 +864,10 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
switch (imx6_pcie->drvdata->variant) {
case IMX6Q:
+ case IMX6Q_EP:
case IMX6SX:
case IMX6QP:
+ case IMX6QP_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0);
break;
@@ -1077,6 +1092,27 @@ static int imx6_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
return 0;
}
+/*
+ * i.MX6Q and i.MX6QP PCIe EP BAR definitions.
+ * +-----------------------------------------------------------------+
+ * | BAR0 | BAR1 | BAR2 | BAR3 | BAR4 | BAR5 |
+ * +----------|----------|----------|----------|----------|----------+
+ * | 64-bit | Disabled | 32-bit | 32-bit | Disabled | Disabled |
+ * | | | | Fixed | | |
+ * | | | | 256Bytes | | |
+ * | Prefetch | | Prefetch | None- | | |
+ * | Memory | | Memory | Prefetch | | |
+ * | | | | IO | | |
+ * +-----------------------------------------------------------------+
+ */
+static const struct pci_epc_features imx6q_pcie_epc_features = {
+ .linkup_notifier = false,
+ .msi_capable = true,
+ .msix_capable = false,
+ .reserved_bar = 1 << BAR_4 | 1 << BAR_5,
+ .align = SZ_64K,
+};
+
static const struct pci_epc_features imx8m_pcie_epc_features = {
.linkup_notifier = false,
.msi_capable = true,
@@ -1088,6 +1124,12 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
static const struct pci_epc_features*
imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+ if (imx6_pcie->drvdata->epc_features)
+ return imx6_pcie->drvdata->epc_features;
+
return &imx8m_pcie_epc_features;
}
@@ -1157,6 +1199,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
switch (imx6_pcie->drvdata->variant) {
case IMX6SX:
case IMX6QP:
+ case IMX6QP_EP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
@@ -1478,6 +1521,13 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.dbi_length = 0x200,
.gpr = "fsl,imx6q-iomuxc-gpr",
},
+ [IMX6Q_EP] = {
+ .variant = IMX6Q_EP,
+ .mode = DW_PCIE_EP_TYPE,
+ .flags = IMX6_PCIE_FLAG_IMX6_PHY,
+ .gpr = "fsl,imx6q-iomuxc-gpr",
+ .epc_features = &imx6q_pcie_epc_features,
+ },
[IMX6SX] = {
.variant = IMX6SX,
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
@@ -1493,6 +1543,13 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.dbi_length = 0x200,
.gpr = "fsl,imx6q-iomuxc-gpr",
},
+ [IMX6QP_EP] = {
+ .variant = IMX6QP_EP,
+ .mode = DW_PCIE_EP_TYPE,
+ .flags = IMX6_PCIE_FLAG_IMX6_PHY,
+ .gpr = "fsl,imx6q-iomuxc-gpr",
+ .epc_features = &imx6q_pcie_epc_features,
+ },
[IMX7D] = {
.variant = IMX7D,
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
@@ -1531,8 +1588,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], },
+ { .compatible = "fsl,imx6q-pcie-ep", .data = &drvdata[IMX6Q_EP], },
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
+ { .compatible = "fsl,imx6qp-pcie-ep", .data = &drvdata[IMX6QP_EP], },
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
--
2.34.1
next prev parent reply other threads:[~2023-08-14 6:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 5:42 [PATCH v4 0/9] Add legacy i.MX PCIe EP mode supports Richard Zhu
2023-08-14 5:42 ` [PATCH v4 1/9] dt-bindings: PCI: fsl,imx6q: Add i.MX6Q and i.MX6QP PCIe EP compatibles Richard Zhu
2023-08-14 5:42 ` [PATCH v4 2/9] dt-bindings: PCI: fsl,imx6q: Add i.MX6SX " Richard Zhu
2023-08-14 5:42 ` [PATCH v4 3/9] dt-bindings: PCI: fsl,imx6q: Add i.MX7D " Richard Zhu
2023-08-14 5:42 ` [PATCH v4 4/9] arm: dts: nxp: Add i.MX6QDL and i.MX6QP PCIe EP supports Richard Zhu
2023-08-14 5:42 ` [PATCH v4 5/9] arm: dts: nxp: Add i.MX6SX PCIe EP support Richard Zhu
2023-08-14 5:42 ` [PATCH v4 6/9] arm: dts: nxp: Add i.MX7D " Richard Zhu
2023-08-14 5:42 ` Richard Zhu [this message]
2023-08-14 5:42 ` [PATCH v4 8/9] PCI: imx6: Add i.MX6SX " Richard Zhu
2023-08-14 5:42 ` [PATCH v4 9/9] PCI: imx6: Add i.MX7D " Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1691991767-15809-8-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=frank.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).