* Stephen Warren wrote:
> On 06/11/2012 09:05 AM, Thierry Reding wrote:
> > With the device tree support in place, probe the PCIe controller from
> > the device tree and remove the corresponding workaround in the board
> > file.
> 
> > diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
> 
> > +	pci_vdd_reg: fixedregulator@0 {
> 
> I think that'd usually just be "regulator@0".
> 
> If you need the "@0" part to differentiate between multiple regulators,
> the node needs a reg property too:
> 
> 	reg = <0 0>;
> 
> although then I wonder about putting the regulator under the root node,
> since the address wouldn't really make sense...

Perhaps we should add a new "regulators" node under the root node to collect
this kind of regulators that don't fit anywhere else. Looking at the code,
something like this should work:

	/ {
		...

		regulators {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <0>;

			pci_vdd_reg: regulator@0 {
				reg = <0>;
			};
		};
	};

Thierry