linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Williamson <alex.williamson@redhat.com>
To: bhelgaas@google.com, linux-pci@vger.kernel.org
Cc: indou.takao@jp.fujitsu.com, linux-kernel@vger.kernel.org
Subject: [PATCH v3 5/9] pci: Split out pci_dev lock/unlock and save/restore
Date: Thu, 01 Aug 2013 10:55:39 -0600	[thread overview]
Message-ID: <20130801165539.16145.79655.stgit@bling.home> (raw)
In-Reply-To: <20130801164652.16145.79918.stgit@bling.home>

Only cosmetic changes to existing paths.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c |   52 +++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index db90692..f6c757a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3378,22 +3378,46 @@ done:
 	return rc;
 }
 
+static void pci_dev_lock(struct pci_dev *dev)
+{
+	pci_cfg_access_lock(dev);
+	/* block PM suspend, driver probe, etc. */
+	device_lock(&dev->dev);
+}
+
+static void pci_dev_unlock(struct pci_dev *dev)
+{
+	device_unlock(&dev->dev);
+	pci_cfg_access_unlock(dev);
+}
+
+static void pci_dev_save_and_disable(struct pci_dev *dev)
+{
+	pci_save_state(dev);
+	/*
+	 * both INTx and MSI are disabled after the Interrupt Disable bit
+	 * is set and the Bus Master bit is cleared.
+	 */
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+}
+
+static void pci_dev_restore(struct pci_dev *dev)
+{
+	pci_restore_state(dev);
+}
+
 static int pci_dev_reset(struct pci_dev *dev, int probe)
 {
 	int rc;
 
-	if (!probe) {
-		pci_cfg_access_lock(dev);
-		/* block PM suspend, driver probe, etc. */
-		device_lock(&dev->dev);
-	}
+	if (!probe)
+		pci_dev_lock(dev);
 
 	rc = __pci_dev_reset(dev, probe);
 
-	if (!probe) {
-		device_unlock(&dev->dev);
-		pci_cfg_access_unlock(dev);
-	}
+	if (!probe)
+		pci_dev_unlock(dev);
+
 	return rc;
 }
 /**
@@ -3484,17 +3508,11 @@ int pci_reset_function(struct pci_dev *dev)
 	if (rc)
 		return rc;
 
-	pci_save_state(dev);
-
-	/*
-	 * both INTx and MSI are disabled after the Interrupt Disable bit
-	 * is set and the Bus Master bit is cleared.
-	 */
-	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+	pci_dev_save_and_disable(dev);
 
 	rc = pci_dev_reset(dev, 0);
 
-	pci_restore_state(dev);
+	pci_dev_restore(dev);
 
 	return rc;
 }


  parent reply	other threads:[~2013-08-01 16:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-01 16:55 [PATCH v3 0/9] pci: bus and slot reset interfaces Alex Williamson
2013-08-01 16:55 ` [PATCH v3 1/9] pci: Create pci_reset_bridge_secondary_bus() Alex Williamson
2013-08-01 16:55 ` [PATCH v3 2/9] pci: Add hotplug_slot_ops.reset_slot() Alex Williamson
2013-08-01 16:55 ` [PATCH v3 3/9] pci: Implement reset_slot for pciehp Alex Williamson
2013-08-01 16:55 ` [PATCH v3 4/9] pci: Add slot reset option to pci_dev_reset Alex Williamson
2013-08-01 16:55 ` Alex Williamson [this message]
2013-08-01 20:59   ` [PATCH v3 5/9] pci: Split out pci_dev lock/unlock and save/restore Don Dutile
2013-08-01 21:04     ` Alex Williamson
2013-08-01 16:55 ` [PATCH v3 6/9] pci: Add slot and bus reset interfaces Alex Williamson
2013-08-01 21:22   ` Don Dutile
2013-08-01 21:32     ` Alex Williamson
2013-08-01 16:55 ` [PATCH v3 7/9] pci: Wake-up devices before save for reset Alex Williamson
2013-08-01 16:55 ` [PATCH v3 8/9] pci: Tune secondary bus reset timing Alex Williamson
2013-08-01 21:29   ` Don Dutile
2013-08-01 21:41     ` Alex Williamson
2013-08-01 21:55       ` Don Dutile
2013-08-01 16:56 ` [PATCH v3 9/9] pci: Remove aer_do_secondary_bus_reset() Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130801165539.16145.79655.stgit@bling.home \
    --to=alex.williamson@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=indou.takao@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).