From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Fri, 12 Sep 2014 11:34:29 +0100 From: Liviu Dudau To: Suravee Suthikulpanit Cc: Bjorn Helgaas , Arnd Bergmann , Rob Herring , Jason Gunthorpe , Benjamin Herrenschmidt , Catalin Marinas , Will Deacon , Russell King , linux-pci , Linus Walleij , Tanmay Inamdar , Grant Likely , Sinan Kaya , Jingoo Han , Kukjin Kim , linux-arch , LKML , Device Tree ML , LAKML Subject: Re: [PATCH v10 09/10] PCI: Assign unassigned bus resources in pci_scan_root_bus() Message-ID: <20140912103429.GA1994@e106497-lin.cambridge.arm.com> References: <1410184472-17630-1-git-send-email-Liviu.Dudau@arm.com> <1410184472-17630-10-git-send-email-Liviu.Dudau@arm.com> <5412C75F.30207@amd.com> MIME-Version: 1.0 In-Reply-To: <5412C75F.30207@amd.com> Content-Type: text/plain; charset=UTF-8 Sender: linux-arch-owner@vger.kernel.org List-ID: On Fri, Sep 12, 2014 at 11:13:51AM +0100, Suravee Suthikulpanit wrote: > On 9/8/2014 8:54 AM, Liviu Dudau wrote: > > If the firmware has not assigned all the bus resources and > > we are not just probing the PCIe busses, it makes sense to > > assign the unassigned resources in pci_scan_root_bus(). > > > > Cc: Bjorn Helgaas > > Cc: Arnd Bergmann > > Cc: Jason Gunthorpe > > Cc: Rob Herring > > Signed-off-by: Liviu Dudau > > --- > > drivers/pci/probe.c | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > > index ef891d2..508cf61 100644 > > --- a/drivers/pci/probe.c > > +++ b/drivers/pci/probe.c > > @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, > > if (!found) > > pci_bus_update_busn_res_end(b, max); > > > > + if (!pci_has_flag(PCI_PROBE_ONLY)) > > + pci_assign_unassigned_bus_resources(b); > > + > > pci_bus_add_devices(b); > > return b; > > } > > > > Liviu, > > Besides the check for PCI_PROBE_ONLY here, I think we also need to avoid calling > "pci_enable_resources()" in the "driver/pci/pci.c: pcibios_enable_device()" for > PCI_PROBE_ONLY mode since the resource is not assigned by Linux. Otherwise, the > "drivers/pci/setup-res.c: pci_enable_resource()" would fail w/ error: > > can't enable device: BAR ..... not assigned Hmm, are you sure that is not because the host bridge resources have not been requested? pci-host-generic.c uses PCI_PROBE_ONLY and yet it works with the series as is. But it does request_resource() for the host bridge resources inside the driver. Best regards, Liviu > > Actually, in "arch/arm/kernel/bios32.c:", the weak "pcibios_enable_device()" function > also has the check for PCI_PROBE_ONLY mode before calling pci_enable_resources(). > > Thanks, > > Suravee > > -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯