linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: iommu@lists.linux-foundation.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Hanjun Guo <hanjun.guo@linaro.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Joerg Roedel <joro@8bytes.org>,
	Marc Zyngier <marc.zyngier@arm.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Tomasz Nowicki <tn@semihalf.com>, Jon Masters <jcm@redhat.com>,
	Eric Auger <eric.auger@redhat.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Nate Watterson <nwatters@codeaurora.org>,
	Prem Mallappa <prem.mallappa@broadcom.com>,
	Dennis Chen <dennis.chen@arm.com>,
	linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 10/16] drivers: iommu: arm-smmu-v3: split probe functions into DT/generic portions
Date: Wed,  9 Nov 2016 14:19:42 +0000	[thread overview]
Message-ID: <20161109141948.19244-11-lorenzo.pieralisi@arm.com> (raw)
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>

Current ARM SMMUv3 probe functions intermingle HW and DT probing in the
initialization functions to detect and programme the ARM SMMU v3 driver
features. In order to allow probing the ARM SMMUv3 with other firmwares
than DT, this patch splits the ARM SMMUv3 init functions into DT and HW
specific portions so that other FW interfaces (ie ACPI) can reuse the HW
probing functions and skip the DT portion accordingly.

This patch implements no functional change, only code reshuffling.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
---
 drivers/iommu/arm-smmu-v3.c | 46 +++++++++++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index fef9f60..f970acd 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2381,10 +2381,10 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
 	return 0;
 }
 
-static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
+static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 {
 	u32 reg;
-	bool coherent;
+	bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
 
 	/* IDR0 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
@@ -2436,13 +2436,9 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
 		smmu->features |= ARM_SMMU_FEAT_HYP;
 
 	/*
-	 * The dma-coherent property is used in preference to the ID
+	 * The coherency feature as set by FW is used in preference to the ID
 	 * register, but warn on mismatch.
 	 */
-	coherent = of_dma_is_coherent(smmu->dev->of_node);
-	if (coherent)
-		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
-
 	if (!!(reg & IDR0_COHACC) != coherent)
 		dev_warn(smmu->dev, "IDR0.COHACC overridden by dma-coherent property (%s)\n",
 			 coherent ? "true" : "false");
@@ -2563,21 +2559,37 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
 	return 0;
 }
 
-static int arm_smmu_device_dt_probe(struct platform_device *pdev)
+static int arm_smmu_device_dt_probe(struct platform_device *pdev,
+				    struct arm_smmu_device *smmu,
+				    bool *bypass)
 {
-	int irq, ret;
-	struct resource *res;
-	struct arm_smmu_device *smmu;
 	struct device *dev = &pdev->dev;
-	bool bypass = true;
 	u32 cells;
 
+	*bypass = true;
+
 	if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
 		dev_err(dev, "missing #iommu-cells property\n");
 	else if (cells != 1)
 		dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
 	else
-		bypass = false;
+		*bypass = false;
+
+	parse_driver_options(smmu);
+
+	if (of_dma_is_coherent(smmu->dev->of_node))
+		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+	return 0;
+}
+
+static int arm_smmu_device_probe(struct platform_device *pdev)
+{
+	int irq, ret;
+	struct resource *res;
+	struct arm_smmu_device *smmu;
+	struct device *dev = &pdev->dev;
+	bool bypass;
 
 	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
 	if (!smmu) {
@@ -2614,10 +2626,12 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
 	if (irq > 0)
 		smmu->gerr_irq = irq;
 
-	parse_driver_options(smmu);
+	ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+	if (ret)
+		return ret;
 
 	/* Probe the h/w */
-	ret = arm_smmu_device_probe(smmu);
+	ret = arm_smmu_device_hw_probe(smmu);
 	if (ret)
 		return ret;
 
@@ -2679,7 +2693,7 @@ static struct platform_driver arm_smmu_driver = {
 		.name		= "arm-smmu-v3",
 		.of_match_table	= of_match_ptr(arm_smmu_of_match),
 	},
-	.probe	= arm_smmu_device_dt_probe,
+	.probe	= arm_smmu_device_probe,
 	.remove	= arm_smmu_device_remove,
 };
 
-- 
2.10.0


  parent reply	other threads:[~2016-11-09 14:19 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-09 14:19 [PATCH v7 00/16] ACPI IORT ARM SMMU support Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 01/16] drivers: acpi: add FWNODE_ACPI_STATIC fwnode type Lorenzo Pieralisi
2016-11-09 23:37   ` Rafael J. Wysocki
2016-11-09 14:19 ` [PATCH v7 02/16] drivers: acpi: iort: introduce linker section for IORT entries probing Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 03/16] drivers: acpi: iort: add support for IOMMU fwnode registration Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 04/16] drivers: iommu: make of_iommu_set/get_ops() DT agnostic Lorenzo Pieralisi
2016-11-09 14:40   ` Robin Murphy
2016-11-10 11:05     ` Lorenzo Pieralisi
2016-11-11 15:22   ` Joerg Roedel
2016-11-11 16:17     ` Robin Murphy
2016-11-11 16:27       ` Joerg Roedel
2016-11-11 17:43         ` Robin Murphy
2016-11-14 10:26           ` Lorenzo Pieralisi
2016-11-14 12:00             ` Robin Murphy
2016-11-14 15:52               ` Joerg Roedel
2016-11-14 16:42                 ` Lorenzo Pieralisi
2016-11-14 18:25                 ` Robin Murphy
2016-11-15 10:07                   ` Lorenzo Pieralisi
2016-11-16  9:56                   ` Lorenzo Pieralisi
2016-11-29 16:05                     ` Joerg Roedel
2016-11-29 17:06                       ` Will Deacon
2016-11-09 14:19 ` [PATCH v7 05/16] drivers: iommu: arm-smmu: convert struct device of_node to fwnode usage Lorenzo Pieralisi
2016-11-09 14:43   ` Robin Murphy
2016-11-09 14:19 ` [PATCH v7 06/16] drivers: iommu: arm-smmu-v3: " Lorenzo Pieralisi
2016-11-09 14:44   ` Robin Murphy
2016-11-09 14:19 ` [PATCH v7 07/16] drivers: acpi: implement acpi_dma_configure Lorenzo Pieralisi
2016-11-09 15:33   ` Robin Murphy
2016-11-16  0:55   ` Rafael J. Wysocki
2016-11-09 14:19 ` [PATCH v7 08/16] drivers: acpi: iort: add node match function Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 09/16] drivers: acpi: iort: add support for ARM SMMU platform devices creation Lorenzo Pieralisi
2016-11-09 14:19 ` Lorenzo Pieralisi [this message]
2016-11-09 14:19 ` [PATCH v7 11/16] drivers: iommu: arm-smmu-v3: add IORT configuration Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 12/16] drivers: iommu: arm-smmu: split probe functions into DT/generic portions Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 13/16] drivers: iommu: arm-smmu: add IORT configuration Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 14/16] drivers: acpi: iort: replace rid map type with type mask Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 15/16] drivers: acpi: iort: add single mapping function Lorenzo Pieralisi
2016-11-09 14:19 ` [PATCH v7 16/16] drivers: acpi: iort: introduce iort_iommu_configure Lorenzo Pieralisi
2016-11-16  0:56   ` Rafael J. Wysocki
2016-11-09 23:36 ` [PATCH v7 00/16] ACPI IORT ARM SMMU support Rafael J. Wysocki
2016-11-10 10:58   ` Lorenzo Pieralisi
2016-11-15 10:12   ` Lorenzo Pieralisi
2016-11-15 13:04     ` Rafael J. Wysocki
2016-11-15 14:07       ` Lorenzo Pieralisi
2016-11-11 12:44 ` Hanjun Guo
2016-11-16 13:28 ` Tomasz Nowicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161109141948.19244-11-lorenzo.pieralisi@arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=dennis.chen@arm.com \
    --cc=eric.auger@redhat.com \
    --cc=hanjun.guo@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jcm@redhat.com \
    --cc=joro@8bytes.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=nwatters@codeaurora.org \
    --cc=okaya@codeaurora.org \
    --cc=prem.mallappa@broadcom.com \
    --cc=rjw@rjwysocki.net \
    --cc=robin.murphy@arm.com \
    --cc=tn@semihalf.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).