linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: kishon@ti.com, cyrille.pitchen@free-electrons.com,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Niklas Cassel <niklass@axis.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 12/12] misc: pci_endpoint_test: Handle 64-bit BARs properly
Date: Wed, 28 Mar 2018 13:50:17 +0200	[thread overview]
Message-ID: <20180328115018.31921-13-niklas.cassel@axis.com> (raw)
In-Reply-To: <20180328115018.31921-1-niklas.cassel@axis.com>

A 64-bit BAR consists of a BAR pair, where the second BAR has the
upper bits, so we cannot simply call pci_ioremap_bar() on every single
BAR index.

The second BAR in a BAR pair will not have the IORESOURCE_MEM resource
flag set. Only call ioremap on BARs that have the IORESOURCE_MEM
resource flag set.

pci 0000:01:00.0: BAR 4: assigned [mem 0xc0300000-0xc031ffff 64bit]
pci 0000:01:00.0: BAR 2: assigned [mem 0xc0320000-0xc03203ff 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0xc0320400-0xc03204ff 64bit]
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 1: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR1
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 3: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR3
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 5: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR5

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/misc/pci_endpoint_test.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 320276f42653..fe8897e64635 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -534,12 +534,14 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	}
 
 	for (bar = BAR_0; bar <= BAR_5; bar++) {
-		base = pci_ioremap_bar(pdev, bar);
-		if (!base) {
-			dev_err(dev, "failed to read BAR%d\n", bar);
-			WARN_ON(bar == test_reg_bar);
+		if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+			base = pci_ioremap_bar(pdev, bar);
+			if (!base) {
+				dev_err(dev, "failed to read BAR%d\n", bar);
+				WARN_ON(bar == test_reg_bar);
+			}
+			test->bar[bar] = base;
 		}
-		test->bar[bar] = base;
 	}
 
 	test->base = test->bar[test_reg_bar];
-- 
2.14.2

  parent reply	other threads:[~2018-03-28 11:51 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-28 11:50 [PATCH v5 00/12] PCI endpoint 64-bit BAR fixes Niklas Cassel
2018-03-28 11:50 ` [PATCH v5 01/12] PCI: endpoint: BAR width should not depend on sizeof dma_addr_t Niklas Cassel
2018-03-29  9:35   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 02/12] PCI: endpoint: Simplify epc->ops->set_bar()/pci_epc_set_bar() Niklas Cassel
2018-03-28 13:12   ` Gustavo Pimentel
2018-03-29  9:36   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 03/12] PCI: endpoint: Setting BAR_5 to 64-bits wide is invalid Niklas Cassel
2018-03-29  9:40   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 04/12] PCI: endpoint: Setting 64-bit/prefetch bit is invalid when IO is set Niklas Cassel
2018-03-29  9:42   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 05/12] PCI: endpoint: Setting a BAR size > 4 GB is invalid if 64-bit flag is not set Niklas Cassel
2018-03-29  9:42   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 06/12] PCI: designware-ep: Make dw_pcie_ep_set_bar() handle 64-bit BARs properly Niklas Cassel
2018-03-28 13:13   ` Gustavo Pimentel
2018-03-29  9:47   ` Kishon Vijay Abraham I
2018-04-02 19:37     ` Niklas Cassel
2018-04-03  5:39       ` Kishon Vijay Abraham I
2018-04-03 12:53       ` Lorenzo Pieralisi
2018-04-03 14:03         ` Niklas Cassel
2018-03-28 11:50 ` [PATCH v5 07/12] PCI: cadence: Set PCI_BASE_ADDRESS_MEM_TYPE_64 if a 64-bit BAR was set-up Niklas Cassel
2018-03-28 13:24   ` Alan Douglas
2018-03-28 19:37     ` Bjorn Helgaas
2018-03-29 16:49       ` Alan Douglas
2018-03-28 11:50 ` [PATCH v5 08/12] PCI: endpoint: Handle 64-bit BARs properly Niklas Cassel
2018-03-29  9:50   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 09/12] PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar Niklas Cassel
2018-03-28 13:14   ` Gustavo Pimentel
2018-03-29 10:00   ` Kishon Vijay Abraham I
2018-04-02 18:47     ` Niklas Cassel
2018-03-28 11:50 ` [PATCH v5 10/12] PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing Niklas Cassel
2018-03-29 10:02   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` [PATCH v5 11/12] PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly Niklas Cassel
2018-03-28 13:14   ` Gustavo Pimentel
2018-03-29 10:03   ` Kishon Vijay Abraham I
2018-03-28 11:50 ` Niklas Cassel [this message]
2018-03-29 13:52 ` [PATCH v5 00/12] PCI endpoint 64-bit BAR fixes Gustavo Pimentel
2018-04-02 19:39   ` Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180328115018.31921-13-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=arnd@arndb.de \
    --cc=cyrille.pitchen@free-electrons.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).