linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH 2/4] PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources()
Date: Mon, 21 May 2018 15:11:21 +0200	[thread overview]
Message-ID: <20180521131123.2009-2-marek.vasut+renesas@gmail.com> (raw)
In-Reply-To: <20180521131123.2009-1-marek.vasut+renesas@gmail.com>

The rcar_pcie_get_resources() is another misnomer with a side effect.
The function does not only get resources, but also enables/disables bus
clock. This is forgotten in the probe() function though and if anything
in probe() fails after rcar_pcie_get_resources() is called, the bus
clock are never disabled.

This patch pulls the clock handling out of the rcar_pcie_get_resources()
and enables clock after all the resources were requested. Moreover, this
patch also always disables the clock in case of failure.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
 drivers/pci/host/pcie-rcar.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index dbc80e457f95..eac4b71d9c60 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -919,32 +919,22 @@ static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
 		dev_err(dev, "cannot get pcie bus clock\n");
 		return PTR_ERR(pcie->bus_clk);
 	}
-	err = clk_prepare_enable(pcie->bus_clk);
-	if (err)
-		return err;
 
 	i = irq_of_parse_and_map(dev->of_node, 0);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		err = -ENOENT;
-		goto err_map_reg;
+		return -ENOENT;
 	}
 	pcie->msi.irq1 = i;
 
 	i = irq_of_parse_and_map(dev->of_node, 1);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		err = -ENOENT;
-		goto err_map_reg;
+		return -ENOENT;
 	}
 	pcie->msi.irq2 = i;
 
 	return 0;
-
-err_map_reg:
-	clk_disable_unprepare(pcie->bus_clk);
-
-	return err;
 }
 
 static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
@@ -1125,9 +1115,15 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 		goto err_pm_put;
 	}
 
+	err = clk_prepare_enable(pcie->bus_clk);
+	if (err) {
+		dev_err(dev, "failed to enable bus clock: %d\n", err);
+		goto err_pm_put;
+	}
+
 	err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
 	if (err)
-		goto err_pm_put;
+		goto err_clk_disable;
 
 	/* Failure to get a link might just be that no cards are inserted */
 	hw_init_fn = of_device_get_match_data(dev);
@@ -1135,7 +1131,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	if (err) {
 		dev_info(dev, "PCIe link down\n");
 		err = -ENODEV;
-		goto err_pm_put;
+		goto err_clk_disable;
 	}
 
 	data = rcar_pci_read_reg(pcie, MACSR);
@@ -1147,16 +1143,19 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 			dev_err(dev,
 				"failed to enable MSI support: %d\n",
 				err);
-			goto err_pm_put;
+			goto err_clk_disable;
 		}
 	}
 
 	err = rcar_pcie_enable(pcie);
 	if (err)
-		goto err_pm_put;
+		goto err_clk_disable;
 
 	return 0;
 
+err_clk_disable:
+	clk_disable_unprepare(pcie->bus_clk);
+
 err_pm_put:
 	pm_runtime_put(dev);
 
-- 
2.16.2

  reply	other threads:[~2018-05-21 13:11 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 13:11 [PATCH 1/4] PCI: rcar: Rename rcar_pcie_parse_request_of_pci_ranges() Marek Vasut
2018-05-21 13:11 ` Marek Vasut [this message]
2018-05-22  9:13   ` [PATCH 2/4] PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources() Simon Horman
2018-05-22 15:11   ` Geert Uytterhoeven
2018-05-21 13:11 ` [PATCH 3/4] PCI: rcar: Add missing irq_dispose_mapping() into failpath Marek Vasut
2018-05-22  9:14   ` Simon Horman
2018-05-22 15:18   ` Geert Uytterhoeven
2018-05-22 21:51     ` Marek Vasut
2018-05-21 13:11 ` [PATCH 4/4] PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails Marek Vasut
2018-05-22  9:16   ` Simon Horman
2018-05-22 18:36   ` Geert Uytterhoeven
2018-05-22 21:53     ` Marek Vasut
2018-05-23  6:18       ` Geert Uytterhoeven
2018-05-23 10:38         ` Marek Vasut
2018-05-22  9:12 ` [PATCH 1/4] PCI: rcar: Rename rcar_pcie_parse_request_of_pci_ranges() Simon Horman
2018-05-22 10:53 ` Geert Uytterhoeven
2018-05-23 16:17 ` Lorenzo Pieralisi
2018-05-23 17:05   ` Marek Vasut
2018-05-23 21:56     ` Bjorn Helgaas
2018-05-24  7:24       ` Marek Vasut
2018-05-24 13:50         ` Lorenzo Pieralisi
2018-05-24 14:36           ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180521131123.2009-2-marek.vasut+renesas@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).