From: Keith Busch <keith.busch@intel.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: poza@codeaurora.org, Sinan Kaya <okaya@kernel.org>,
Bjorn Helgaas <helgaas@kernel.org>,
Thomas Tai <thomas.tai@oracle.com>,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-pci-owner@vger.kernel.org,
Sam Bobroff <sam.bobroff@au1.ibm.com>
Subject: Re: [PATCH 1/1] PCI/AER: prevent pcie_do_fatal_recovery from using device after it is removed
Date: Mon, 20 Aug 2018 09:53:25 -0600 [thread overview]
Message-ID: <20180820155325.GA16148@localhost.localdomain> (raw)
In-Reply-To: <2ecd1fd6d763810d45697f846fa876b58a193b1b.camel@kernel.crashing.org>
On Mon, Aug 20, 2018 at 09:22:27PM +1000, Benjamin Herrenschmidt wrote:
> The main problem with unplug/replug (as I mentioned earlier) is that it
> just does NOT work for storage controllers (or similar type of
> devices). The links between the storage controller and the mounted
> filesystems is lost permanently, you'll most likely have to reboot the
> machine.
You probably shouldn't mount raw storage devices if they can be hot
added/removed. There are device mappers for that! :)
And you can't just change DPC device removal. A DPC event triggers
the link down, and that will trigger pciehp to disconnect the subtree
anyway. Having DPC do it too just means you get the same behavior with
or without enabling STLCTL.DLLSC.
next prev parent reply other threads:[~2018-08-20 15:53 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 16:51 [PATCH 0/1] PCI/AER: prevent pcie_do_fatal_recovery from using device after it is removed Thomas Tai
2018-08-13 16:51 ` [PATCH 1/1] " Thomas Tai
2018-08-14 9:16 ` poza
2018-08-14 9:22 ` poza
2018-08-14 13:51 ` Thomas Tai
2018-08-15 14:57 ` poza
2018-08-15 15:02 ` Thomas Tai
2018-08-15 15:26 ` poza
2018-08-15 15:43 ` Thomas Tai
2018-08-15 15:59 ` poza
2018-08-15 16:04 ` Thomas Tai
2018-08-15 21:55 ` Benjamin Herrenschmidt
2018-08-15 21:56 ` Benjamin Herrenschmidt
2018-08-16 6:36 ` poza
2018-08-16 6:51 ` Benjamin Herrenschmidt
2018-08-16 6:59 ` Benjamin Herrenschmidt
2018-08-16 8:07 ` poza
2018-08-16 8:12 ` Benjamin Herrenschmidt
2018-08-16 9:03 ` poza
2018-08-16 10:07 ` Benjamin Herrenschmidt
2018-08-16 14:11 ` poza
2018-08-16 23:30 ` Benjamin Herrenschmidt
2018-08-17 10:29 ` poza
2018-08-17 10:44 ` poza
2018-08-18 7:38 ` Benjamin Herrenschmidt
2018-08-16 7:05 ` Benjamin Herrenschmidt
2018-08-16 7:15 ` Benjamin Herrenschmidt
2018-08-16 7:56 ` poza
2018-08-16 8:10 ` Benjamin Herrenschmidt
2018-08-16 8:05 ` poza
2018-08-16 8:15 ` Benjamin Herrenschmidt
2018-08-16 8:22 ` poza
2018-08-16 8:28 ` Benjamin Herrenschmidt
2018-08-16 13:30 ` Thomas Tai
2018-08-16 13:46 ` Sinan Kaya
2018-08-16 23:27 ` Benjamin Herrenschmidt
2018-08-17 6:35 ` poza
2018-08-19 2:24 ` Bjorn Helgaas
2018-08-20 5:09 ` poza
2018-08-20 5:15 ` Benjamin Herrenschmidt
2018-08-20 13:02 ` Thomas Tai
2018-08-20 13:27 ` Benjamin Herrenschmidt
2018-08-19 2:19 ` Bjorn Helgaas
2018-08-19 21:41 ` Sinan Kaya
2018-08-20 2:03 ` Benjamin Herrenschmidt
2018-08-20 5:19 ` poza
2018-08-20 5:33 ` Benjamin Herrenschmidt
2018-08-20 7:56 ` poza
2018-08-20 11:22 ` Benjamin Herrenschmidt
2018-08-20 13:26 ` poza
2018-08-20 21:02 ` Benjamin Herrenschmidt
2018-08-21 5:14 ` poza
2018-08-21 6:06 ` Benjamin Herrenschmidt
2018-08-21 14:37 ` Keith Busch
2018-08-21 15:07 ` Sinan Kaya
2018-08-21 15:29 ` Keith Busch
2018-08-21 15:50 ` Sinan Kaya
2018-08-21 15:55 ` Sinan Kaya
2018-08-21 16:44 ` Keith Busch
2018-08-21 15:30 ` poza
2018-08-21 21:14 ` Benjamin Herrenschmidt
2018-08-21 22:04 ` Keith Busch
2018-08-21 22:33 ` Keith Busch
2018-08-21 23:06 ` Benjamin Herrenschmidt
2018-08-21 23:13 ` Keith Busch
2018-08-22 0:36 ` Benjamin Herrenschmidt
2018-08-30 0:01 ` Keith Busch
2018-08-30 0:10 ` Sinan Kaya
2018-08-30 0:46 ` Keith Busch
2018-08-30 4:26 ` Benjamin Herrenschmidt
2018-08-20 15:53 ` Keith Busch [this message]
2018-08-20 16:13 ` poza
2018-08-20 16:32 ` Keith Busch
2018-08-20 21:05 ` Benjamin Herrenschmidt
2018-08-20 21:21 ` Sinan Kaya
2018-08-20 21:35 ` Keith Busch
2018-08-20 21:53 ` Benjamin Herrenschmidt
2018-08-20 22:02 ` Sinan Kaya
2018-08-20 22:04 ` Benjamin Herrenschmidt
2018-08-20 22:13 ` Sinan Kaya
2018-08-20 22:19 ` Benjamin Herrenschmidt
2018-08-22 9:13 ` Lukas Wunner
2018-08-22 14:38 ` Keith Busch
2018-08-22 14:51 ` Sinan Kaya
2018-08-20 22:13 ` Keith Busch
2018-08-20 22:19 ` Benjamin Herrenschmidt
2018-08-21 1:30 ` Keith Busch
2018-08-20 4:37 ` Benjamin Herrenschmidt
2018-08-20 4:39 ` PATCH] Partial revert of "PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices" Benjamin Herrenschmidt
2018-08-21 19:50 ` Bjorn Helgaas
2018-08-22 4:35 ` poza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180820155325.GA16148@localhost.localdomain \
--to=keith.busch@intel.com \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=helgaas@kernel.org \
--cc=linux-pci-owner@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=okaya@kernel.org \
--cc=poza@codeaurora.org \
--cc=sam.bobroff@au1.ibm.com \
--cc=thomas.tai@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).