From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: Date: Tue, 28 Aug 2018 19:41:22 -0500 From: Rob Herring To: Hanjie Lin Subject: Re: [PATCH v2 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller Message-ID: <20180829004122.GA25928@bogus> References: <1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com> <1535096165-45827-2-git-send-email-hanjie.lin@amlogic.com> <8c48964151d24758298ba935da336c0829e2b287.camel@baylibre.com> <11d7547b-feb4-6ecb-cef3-db46ce8ee2ef@amlogic.com> MIME-Version: 1.0 In-Reply-To: <11d7547b-feb4-6ecb-cef3-db46ce8ee2ef@amlogic.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Jianxin Pan , Kevin Hilman , Yixun Lan , linux-kernel@vger.kernel.org, Yue Wang , Qiufang Dai , Liang Yang , Jian Hu , linux-pci@vger.kernel.org, Bjorn Helgaas , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Jerome Brunet Content-Type: text/plain; charset="us-ascii" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+bjorn=helgaas.com@lists.infradead.org List-ID: On Mon, Aug 27, 2018 at 04:55:20PM +0800, Hanjie Lin wrote: > > > On 2018/8/24 16:22, Jerome Brunet wrote: > > On Fri, 2018-08-24 at 15:36 +0800, Hanjie Lin wrote: > >> From: Yue Wang > >> > >> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare > >> PCI core. This patch adds documentation for the DT bindings in Meson PCIe > >> controller. > >> > >> Signed-off-by: Yue Wang > >> Signed-off-by: Hanjie Lin > >> --- > >> .../devicetree/bindings/pci/amlogic,meson-pcie.txt | 63 ++++++++++++++++++++++ > >> 1 file changed, 63 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > >> > >> diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > >> new file mode 100644 > >> index 0000000..8a831d1 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > >> @@ -0,0 +1,63 @@ > >> +Amlogic Meson AXG DWC PCIE SoC controller > >> + > >> +Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. > >> +It shares common functions with the PCIe DesignWare core driver and > >> +inherits common properties defined in > >> +Documentation/devicetree/bindings/pci/designware-pci.txt. > >> + > >> +Additional properties are described here: > >> + > >> +Required properties: > >> +- compatible: > >> + should contain "amlogic,axg-pcie" to identify the core. > >> +- reg: > >> + Should contain the configuration address space. > >> +- reg-names: Must be > >> + - "elbi" External local bus interface registers > >> + - "cfg" Meson specific registers > >> + - "config" PCIe configuration space > >> +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. > >> +- clocks: Must contain an entry for each entry in clock-names. > >> +- clock-names: Must include the following entries: > >> + - "pclk" PCIe GEN 100M PLL clock > >> + - "port" PCIe_x(A or B) RC clock gate > >> + - "general" PCIe Phy clock > >> + - "mipi" PCIe_x(A or B) 100M ref clock gate > >> +- resets: phandle to the reset lines. > >> +- reset-names: must contain "phy" and "peripheral" > >> + - "port" Port A or B reset > >> + - "apb" APB reset > > > > The above description is not coherent (phy <=> port) > > > > Yes, this should be port and apb here. > We'll integrate phy driver into ctrl driver, and move phy reset to here also. Why? That's the wrong thing to do if they are separate h/w blocks. You can do whatever you like in the drivers, but the DT should reflect the h/w. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel