From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Mika Westerberg To: Bjorn Helgaas , "Rafael J. Wysocki" Cc: Len Brown , Lukas Wunner , Keith Busch , Ashok Raj , Mario.Limonciello@dell.com, Anthony Wong , Linus Walleij , Sakari Ailus , Mika Westerberg , linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org Subject: [PATCH v2 03/10] PCI: pciehp: Disable hotplug interrupt during suspend Date: Thu, 13 Sep 2018 17:33:15 +0300 Message-Id: <20180913143322.77953-4-mika.westerberg@linux.intel.com> In-Reply-To: <20180913143322.77953-1-mika.westerberg@linux.intel.com> References: <20180913143322.77953-1-mika.westerberg@linux.intel.com> Sender: linux-acpi-owner@vger.kernel.org List-ID: When PCIe hotplug port is transitioned into D3hot link to the downstream component will go down. If hotplug interrupt generation is enabled when that happens it will trigger immediately waking up the system and bringing the link back up. To prevent this disable hotplug interrupt generation when system suspend is entered. This does not prevent wakeup from low power states according to PCIe 4.0 spec section 6.7.3.4: Software enables a hot-plug event to generate a wakeup event by enabling software notification of the event as described in Section 6.7.3.1. Note that in order for software to disable interrupt generation while keeping wakeup generation enabled, the Hot-Plug Interrupt Enable bit must be cleared. So as long as we have set the slot event mask accordingly wakeup should work even if slot interrupt is disabled. The port should trigger wake and then send PME to the root port when the PCIe hierarchy is brought back up. Limit this to systems using native PME mechanism to make sure older Apple systems depending on commit e3354628c376 ("PCI: pciehp: Support interrupts sent from D3hot") still continue working. Signed-off-by: Mika Westerberg Reviewed-by: Rafael J. Wysocki --- drivers/pci/hotplug/pciehp.h | 2 ++ drivers/pci/hotplug/pciehp_core.c | 18 ++++++++++++++++++ drivers/pci/hotplug/pciehp_hpc.c | 10 ++++++++++ 3 files changed, 30 insertions(+) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8131c08b21e5..9a8051a878dc 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -184,6 +184,8 @@ struct controller *pcie_init(struct pcie_device *dev); int pcie_init_notification(struct controller *ctrl); void pcie_shutdown_notification(struct controller *ctrl); void pcie_clear_hotplug_events(struct controller *ctrl); +void pcie_enable_interrupt(struct controller *ctrl); +void pcie_disable_interrupt(struct controller *ctrl); int pciehp_power_on_slot(struct slot *slot); void pciehp_power_off_slot(struct slot *slot); void pciehp_get_power_status(struct slot *slot, u8 *status); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index ccaf01e6eced..940c64fdcaae 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -265,8 +265,23 @@ static void pciehp_remove(struct pcie_device *dev) } #ifdef CONFIG_PM +static bool pme_is_native(struct pcie_device *dev) +{ + const struct pci_host_bridge *host; + + host = pci_find_host_bridge(dev->port->bus); + return pcie_ports_native || host->native_pme; +} + static int pciehp_suspend(struct pcie_device *dev) { + /* + * Disable hotplug interrupt so that it does not trigger + * immediately when the downstream link goes down. + */ + if (pme_is_native(dev)) + pcie_disable_interrupt(get_service_data(dev)); + return 0; } @@ -290,6 +305,9 @@ static int pciehp_resume(struct pcie_device *dev) { struct controller *ctrl = get_service_data(dev); + if (pme_is_native(dev)) + pcie_enable_interrupt(ctrl); + pciehp_check_presence(ctrl); return 0; diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 017161c03a4d..02fb6e367e2a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -748,6 +748,16 @@ void pcie_clear_hotplug_events(struct controller *ctrl) PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC); } +void pcie_enable_interrupt(struct controller *ctrl) +{ + pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_HPIE, PCI_EXP_SLTCTL_HPIE); +} + +void pcie_disable_interrupt(struct controller *ctrl) +{ + pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_HPIE); +} + /* * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary * bus reset of the bridge, but at the same time we want to ensure that it is -- 2.18.0