linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: lorenzo.pieralisi@arm.com, jingoohan1@gmail.com,
	gustavo.pimentel@synopsys.com, l.stach@pengutronix.de,
	tpiepho@impinj.com
Cc: leonard.crestez@nxp.com, bhelgaas@google.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Stefan Agner <stefan@agner.ch>
Subject: [PATCH v4 2/3] PCI: imx6: introduce drvdata
Date: Tue,  4 Dec 2018 17:55:27 +0100	[thread overview]
Message-ID: <20181204165528.15534-2-stefan@agner.ch> (raw)
In-Reply-To: <20181204165528.15534-1-stefan@agner.ch>

Introduce driver data struct. This will simplify handling of device
specific differences.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
Changes in v2:
- Split drvdata introduction in a separate patch
- Use an array instead of individual struct imx6_pcie_drvdata declarations
Changes in v3:
- Rebase on pci/dwc
Changes in v4:
- Rebase on pci/dwc

 drivers/pci/controller/dwc/pci-imx6.c | 48 ++++++++++++++++-----------
 1 file changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 26087b3da590..45cbdf2ccf80 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -41,6 +41,10 @@ enum imx6_pcie_variants {
 	IMX7D,
 };
 
+struct imx6_pcie_drvdata {
+	enum imx6_pcie_variants variant;
+};
+
 struct imx6_pcie {
 	struct dw_pcie		*pci;
 	int			reset_gpio;
@@ -53,7 +57,6 @@ struct imx6_pcie {
 	struct reset_control	*pciephy_reset;
 	struct reset_control	*apps_reset;
 	struct reset_control	*turnoff_reset;
-	enum imx6_pcie_variants variant;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2_3p5db;
 	u32			tx_deemph_gen2_6db;
@@ -66,6 +69,7 @@ struct imx6_pcie {
 	struct device		*pd_pcie;
 	/* power domain for pcie phy */
 	struct device		*pd_pcie_phy;
+	const struct imx6_pcie_drvdata *drvdata;
 };
 
 /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -340,7 +344,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct device *dev = imx6_pcie->pci->dev;
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		reset_control_assert(imx6_pcie->pciephy_reset);
 		reset_control_assert(imx6_pcie->apps_reset);
@@ -382,7 +386,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
 	struct device *dev = pci->dev;
 	int ret = 0;
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 		ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
 		if (ret) {
@@ -485,7 +489,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 					!imx6_pcie->gpio_active_high);
 	}
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
 		imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
@@ -523,7 +527,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 
 static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 {
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
@@ -645,7 +649,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
 {
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6Q:
 	case IMX6SX:
 	case IMX6QP:
@@ -698,7 +702,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 		tmp |= PORT_LOGIC_SPEED_CHANGE;
 		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
 
-		if (imx6_pcie->variant != IMX7D) {
+		if (imx6_pcie->drvdata->variant != IMX7D) {
 			/*
 			 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
 			 * from i.MX6 family when no link speed transition
@@ -801,7 +805,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
 {
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 	case IMX6QP:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -827,7 +831,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 	}
 
 	/* Others poke directly at IOMUXC registers */
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
@@ -857,7 +861,7 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
 	clk_disable_unprepare(imx6_pcie->pcie_phy);
 	clk_disable_unprepare(imx6_pcie->pcie_bus);
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
 		break;
@@ -873,8 +877,8 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
 
 static inline bool imx6_pcie_supports_suspend(struct imx6_pcie *imx6_pcie)
 {
-	return (imx6_pcie->variant == IMX7D ||
-		imx6_pcie->variant == IMX6SX);
+	return (imx6_pcie->drvdata->variant == IMX7D ||
+		imx6_pcie->drvdata->variant == IMX6SX);
 }
 
 static int imx6_pcie_suspend_noirq(struct device *dev)
@@ -939,8 +943,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	pci->ops = &dw_pcie_ops;
 
 	imx6_pcie->pci = pci;
-	imx6_pcie->variant =
-		(enum imx6_pcie_variants)of_device_get_match_data(dev);
+	imx6_pcie->drvdata = of_device_get_match_data(dev);
 
 	dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
@@ -984,7 +987,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(imx6_pcie->pcie);
 	}
 
-	switch (imx6_pcie->variant) {
+	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 		imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
 							   "pcie_inbound_axi");
@@ -1082,11 +1085,18 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 	imx6_pcie_assert_core_reset(imx6_pcie);
 }
 
+static const struct imx6_pcie_drvdata drvdata[] = {
+	[IMX6Q] = { .variant = IMX6Q },
+	[IMX6SX] = { .variant = IMX6SX },
+	[IMX6QP] = { .variant = IMX6QP },
+	[IMX7D] = { .variant = IMX7D },
+};
+
 static const struct of_device_id imx6_pcie_of_match[] = {
-	{ .compatible = "fsl,imx6q-pcie",  .data = (void *)IMX6Q,  },
-	{ .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
-	{ .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
-	{ .compatible = "fsl,imx7d-pcie",  .data = (void *)IMX7D,  },
+	{ .compatible = "fsl,imx6q-pcie",  .data = &drvdata[IMX6Q],  },
+	{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
+	{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
+	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
 	{},
 };
 
-- 
2.19.1


  reply	other threads:[~2018-12-04 16:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-04 16:55 [PATCH v4 1/3] PCI: dwc: allow to limit registers set length Stefan Agner
2018-12-04 16:55 ` Stefan Agner [this message]
2018-12-04 16:55 ` [PATCH v4 3/3] PCI: imx6: limit DBI register length Stefan Agner
2018-12-04 19:08   ` Leonard Crestez
2019-01-30 17:54 ` [PATCH v4 1/3] PCI: dwc: allow to limit registers set length Lorenzo Pieralisi
2019-01-31  9:08   ` Stefan Agner
2019-02-01 17:13     ` Lorenzo Pieralisi
2019-02-04 12:27     ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181204165528.15534-2-stefan@agner.ch \
    --to=stefan@agner.ch \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=tpiepho@impinj.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).