* [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs
@ 2018-12-29 3:26 Ming Lei
2018-12-29 3:26 ` [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity Ming Lei
2019-01-14 13:13 ` [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs John Garry
0 siblings, 2 replies; 8+ messages in thread
From: Ming Lei @ 2018-12-29 3:26 UTC (permalink / raw)
To: linux-nvme, Christoph Hellwig
Cc: Ming Lei, Shan Hai, Keith Busch, Jens Axboe, linux-pci, Bjorn Helgaas
Hi,
The 1st one fixes the case that -EINVAL is returned from pci_alloc_irq_vectors_affinity(),
and it is found without this patch QEMU may fallback to single queue if CPU cores is >= 64.
The 2st one fixes the case that -ENOSPC is returned from pci_alloc_irq_vectors_affinity(),
and boot failure is observed on aarch64 system with less irq vectors.
The last one introduces modules parameter of 'default_queues' for addressing irq vector
exhaustion issue reported by Shan Hai.
Ming Lei (3):
PCI/MSI: preference to returning -ENOSPC from
pci_alloc_irq_vectors_affinity
nvme pci: fix nvme_setup_irqs()
nvme pci: introduce module parameter of 'default_queues'
drivers/nvme/host/pci.c | 31 ++++++++++++++++++++++---------
drivers/pci/msi.c | 20 +++++++++++---------
2 files changed, 33 insertions(+), 18 deletions(-)
Cc: Shan Hai <shan.hai@oracle.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: linux-pci@vger.kernel.org,
Cc: Bjorn Helgaas <bhelgaas@google.com>,
--
2.9.5
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2018-12-29 3:26 [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs Ming Lei
@ 2018-12-29 3:26 ` Ming Lei
2018-12-31 22:00 ` Bjorn Helgaas
2019-01-14 13:13 ` [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs John Garry
1 sibling, 1 reply; 8+ messages in thread
From: Ming Lei @ 2018-12-29 3:26 UTC (permalink / raw)
To: linux-nvme, Christoph Hellwig
Cc: Ming Lei, Jens Axboe, Keith Busch, linux-pci, Bjorn Helgaas
The API of pci_alloc_irq_vectors_affinity() requires to return -ENOSPC
if leass than @min_vecs interrupt vectors are available for @dev.
However, this way may be changed by falling back to
__pci_enable_msi_range(), for example, if the device isn't capable of
MSI, __pci_enable_msi_range() will return -EINVAL, and finally it is
returned to users of pci_alloc_irq_vectors_affinity() even though
there are quite MSIX vectors available. This way violates the interface.
Users of pci_alloc_irq_vectors_affinity() may try to reduce irq
vectors and allocate vectors again in case that -ENOSPC is returned, such
as NVMe, so we need to respect the current interface and give preference to
-ENOSPC.
Cc: Jens Axboe <axboe@fb.com>,
Cc: Keith Busch <keith.busch@intel.com>,
Cc: linux-pci@vger.kernel.org,
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
drivers/pci/msi.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 7a1c8a09efa5..91b4f03fee91 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1168,7 +1168,8 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
const struct irq_affinity *affd)
{
static const struct irq_affinity msi_default_affd;
- int vecs = -ENOSPC;
+ int msix_vecs = -ENOSPC;
+ int msi_vecs = -ENOSPC;
if (flags & PCI_IRQ_AFFINITY) {
if (!affd)
@@ -1179,16 +1180,17 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
}
if (flags & PCI_IRQ_MSIX) {
- vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
- affd);
- if (vecs > 0)
- return vecs;
+ msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs,
+ max_vecs, affd);
+ if (msix_vecs > 0)
+ return msix_vecs;
}
if (flags & PCI_IRQ_MSI) {
- vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd);
- if (vecs > 0)
- return vecs;
+ msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs,
+ affd);
+ if (msi_vecs > 0)
+ return msi_vecs;
}
/* use legacy irq if allowed */
@@ -1199,7 +1201,7 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
}
}
- return vecs;
+ return msix_vecs == -ENOSPC ? msix_vecs : msi_vecs;
}
EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity);
--
2.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2018-12-29 3:26 ` [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity Ming Lei
@ 2018-12-31 22:00 ` Bjorn Helgaas
2018-12-31 22:41 ` Keith Busch
2019-01-01 5:24 ` Ming Lei
0 siblings, 2 replies; 8+ messages in thread
From: Bjorn Helgaas @ 2018-12-31 22:00 UTC (permalink / raw)
To: Ming Lei
Cc: linux-nvme, Christoph Hellwig, Jens Axboe, Keith Busch, linux-pci
On Sat, Dec 29, 2018 at 11:26:48AM +0800, Ming Lei wrote:
> The API of pci_alloc_irq_vectors_affinity() requires to return -ENOSPC
> if leass than @min_vecs interrupt vectors are available for @dev.
s/leass/fewer/
> However, this way may be changed by falling back to
> __pci_enable_msi_range(), for example, if the device isn't capable of
> MSI, __pci_enable_msi_range() will return -EINVAL, and finally it is
> returned to users of pci_alloc_irq_vectors_affinity() even though
> there are quite MSIX vectors available. This way violates the interface.
I *think* the above means:
If a device supports MSI-X but not MSI and a caller requests
@min_vecs that can't be satisfied by MSI-X, we previously returned
-EINVAL (from the failed attempt to enable MSI), not -ENOSPC.
and I agree that this doesn't match the documented API.
> Users of pci_alloc_irq_vectors_affinity() may try to reduce irq
> vectors and allocate vectors again in case that -ENOSPC is returned, such
> as NVMe, so we need to respect the current interface and give preference to
> -ENOSPC.
I thought the whole point of the (min_vecs, max_vecs) tuple was to
avoid this sort of "reduce and try again" iteration in the callers.
> Cc: Jens Axboe <axboe@fb.com>,
> Cc: Keith Busch <keith.busch@intel.com>,
> Cc: linux-pci@vger.kernel.org,
> Cc: Bjorn Helgaas <bhelgaas@google.com>,
> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> ---
> drivers/pci/msi.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 7a1c8a09efa5..91b4f03fee91 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -1168,7 +1168,8 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> const struct irq_affinity *affd)
> {
> static const struct irq_affinity msi_default_affd;
> - int vecs = -ENOSPC;
> + int msix_vecs = -ENOSPC;
> + int msi_vecs = -ENOSPC;
>
> if (flags & PCI_IRQ_AFFINITY) {
> if (!affd)
> @@ -1179,16 +1180,17 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> }
>
> if (flags & PCI_IRQ_MSIX) {
> - vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
> - affd);
> - if (vecs > 0)
> - return vecs;
> + msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs,
> + max_vecs, affd);
> + if (msix_vecs > 0)
> + return msix_vecs;
> }
>
> if (flags & PCI_IRQ_MSI) {
> - vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd);
> - if (vecs > 0)
> - return vecs;
> + msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs,
> + affd);
> + if (msi_vecs > 0)
> + return msi_vecs;
> }
>
> /* use legacy irq if allowed */
> @@ -1199,7 +1201,7 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> }
> }
>
> - return vecs;
> + return msix_vecs == -ENOSPC ? msix_vecs : msi_vecs;
If you know you want to return -ENOSPC, just return that, not a
variable that happens to contain it, i.e.,
if (msix_vecs == -ENOSPC)
return -ENOSPC;
return msi_vecs;
> }
> EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity);
>
> --
> 2.9.5
>
>
> _______________________________________________
> Linux-nvme mailing list
> Linux-nvme@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2018-12-31 22:00 ` Bjorn Helgaas
@ 2018-12-31 22:41 ` Keith Busch
2019-01-01 5:24 ` Ming Lei
1 sibling, 0 replies; 8+ messages in thread
From: Keith Busch @ 2018-12-31 22:41 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Ming Lei, linux-nvme, Christoph Hellwig, Jens Axboe, linux-pci
On Mon, Dec 31, 2018 at 04:00:59PM -0600, Bjorn Helgaas wrote:
> On Sat, Dec 29, 2018 at 11:26:48AM +0800, Ming Lei wrote:
> > Users of pci_alloc_irq_vectors_affinity() may try to reduce irq
> > vectors and allocate vectors again in case that -ENOSPC is returned, such
> > as NVMe, so we need to respect the current interface and give preference to
> > -ENOSPC.
>
> I thought the whole point of the (min_vecs, max_vecs) tuple was to
> avoid this sort of "reduce and try again" iteration in the callers.
The min/max vecs doesn't work correctly when using the irq_affinity
nr_sets because rebalancing the set counts is driver specific. To get
around that, drivers using nr_sets have to set min and max to the same
value and handle the "reduce and try again".
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2018-12-31 22:00 ` Bjorn Helgaas
2018-12-31 22:41 ` Keith Busch
@ 2019-01-01 5:24 ` Ming Lei
2019-01-02 21:02 ` Bjorn Helgaas
1 sibling, 1 reply; 8+ messages in thread
From: Ming Lei @ 2019-01-01 5:24 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-nvme, Christoph Hellwig, Jens Axboe, Keith Busch, linux-pci
On Mon, Dec 31, 2018 at 04:00:59PM -0600, Bjorn Helgaas wrote:
> On Sat, Dec 29, 2018 at 11:26:48AM +0800, Ming Lei wrote:
> > The API of pci_alloc_irq_vectors_affinity() requires to return -ENOSPC
> > if leass than @min_vecs interrupt vectors are available for @dev.
>
> s/leass/fewer/
>
> > However, this way may be changed by falling back to
> > __pci_enable_msi_range(), for example, if the device isn't capable of
> > MSI, __pci_enable_msi_range() will return -EINVAL, and finally it is
> > returned to users of pci_alloc_irq_vectors_affinity() even though
> > there are quite MSIX vectors available. This way violates the interface.
>
> I *think* the above means:
>
> If a device supports MSI-X but not MSI and a caller requests
> @min_vecs that can't be satisfied by MSI-X, we previously returned
> -EINVAL (from the failed attempt to enable MSI), not -ENOSPC.
>
> and I agree that this doesn't match the documented API.
OK, will use the above comment log.
>
> > Users of pci_alloc_irq_vectors_affinity() may try to reduce irq
> > vectors and allocate vectors again in case that -ENOSPC is returned, such
> > as NVMe, so we need to respect the current interface and give preference to
> > -ENOSPC.
>
> I thought the whole point of the (min_vecs, max_vecs) tuple was to
> avoid this sort of "reduce and try again" iteration in the callers.
As Keith replied, in case of NVMe, we have to keep min_vecs same with
max_vecs.
>
> > Cc: Jens Axboe <axboe@fb.com>,
> > Cc: Keith Busch <keith.busch@intel.com>,
> > Cc: linux-pci@vger.kernel.org,
> > Cc: Bjorn Helgaas <bhelgaas@google.com>,
> > Signed-off-by: Ming Lei <ming.lei@redhat.com>
> > ---
> > drivers/pci/msi.c | 20 +++++++++++---------
> > 1 file changed, 11 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> > index 7a1c8a09efa5..91b4f03fee91 100644
> > --- a/drivers/pci/msi.c
> > +++ b/drivers/pci/msi.c
> > @@ -1168,7 +1168,8 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> > const struct irq_affinity *affd)
> > {
> > static const struct irq_affinity msi_default_affd;
> > - int vecs = -ENOSPC;
> > + int msix_vecs = -ENOSPC;
> > + int msi_vecs = -ENOSPC;
> >
> > if (flags & PCI_IRQ_AFFINITY) {
> > if (!affd)
> > @@ -1179,16 +1180,17 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> > }
> >
> > if (flags & PCI_IRQ_MSIX) {
> > - vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
> > - affd);
> > - if (vecs > 0)
> > - return vecs;
> > + msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs,
> > + max_vecs, affd);
> > + if (msix_vecs > 0)
> > + return msix_vecs;
> > }
> >
> > if (flags & PCI_IRQ_MSI) {
> > - vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd);
> > - if (vecs > 0)
> > - return vecs;
> > + msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs,
> > + affd);
> > + if (msi_vecs > 0)
> > + return msi_vecs;
> > }
> >
> > /* use legacy irq if allowed */
> > @@ -1199,7 +1201,7 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
> > }
> > }
> >
> > - return vecs;
> > + return msix_vecs == -ENOSPC ? msix_vecs : msi_vecs;
>
> If you know you want to return -ENOSPC, just return that, not a
> variable that happens to contain it, i.e.,
>
> if (msix_vecs == -ENOSPC)
> return -ENOSPC;
> return msi_vecs;
OK.
Thanks,
Ming
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2019-01-01 5:24 ` Ming Lei
@ 2019-01-02 21:02 ` Bjorn Helgaas
2019-01-02 22:46 ` Keith Busch
0 siblings, 1 reply; 8+ messages in thread
From: Bjorn Helgaas @ 2019-01-02 21:02 UTC (permalink / raw)
To: Ming Lei
Cc: linux-nvme, Christoph Hellwig, Jens Axboe, Keith Busch, linux-pci
On Tue, Jan 01, 2019 at 01:24:59PM +0800, Ming Lei wrote:
> On Mon, Dec 31, 2018 at 04:00:59PM -0600, Bjorn Helgaas wrote:
> > On Sat, Dec 29, 2018 at 11:26:48AM +0800, Ming Lei wrote:
...
> > > Users of pci_alloc_irq_vectors_affinity() may try to reduce irq
> > > vectors and allocate vectors again in case that -ENOSPC is returned, such
> > > as NVMe, so we need to respect the current interface and give preference to
> > > -ENOSPC.
> >
> > I thought the whole point of the (min_vecs, max_vecs) tuple was to
> > avoid this sort of "reduce and try again" iteration in the callers.
>
> As Keith replied, in case of NVMe, we have to keep min_vecs same with
> max_vecs.
Keith said:
> The min/max vecs doesn't work correctly when using the irq_affinity
> nr_sets because rebalancing the set counts is driver specific. To
> get around that, drivers using nr_sets have to set min and max to
> the same value and handle the "reduce and try again".
Sorry I saw that, but didn't follow it at first. After a little
archaeology, I see that 6da4b3ab9a6e ("genirq/affinity: Add support
for allocating interrupt sets") added nr_sets and some validation
tests (if affd.nr_sets, min_vecs == max_vecs) for using it in the API.
That's sort of a wart on the API, but I don't know if we should live
with it or try to clean it up somehow.
At the very least, this seems like something that could be documented
somewhere in Documentation/PCI/MSI-HOWTO.txt, which mentions
PCI_IRQ_AFFINITY, but doesn't cover struct irq_affinity or
pci_alloc_irq_vectors_affinity() at all, let alone this wrinkle about
affd.nr_sets/min_vecs/max_vecs.
Obviously that would not be part of *this* patch.
Bjorn
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
2019-01-02 21:02 ` Bjorn Helgaas
@ 2019-01-02 22:46 ` Keith Busch
0 siblings, 0 replies; 8+ messages in thread
From: Keith Busch @ 2019-01-02 22:46 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Ming Lei, linux-nvme, Christoph Hellwig, Jens Axboe, linux-pci
On Wed, Jan 02, 2019 at 03:02:02PM -0600, Bjorn Helgaas wrote:
> Keith said:
> > The min/max vecs doesn't work correctly when using the irq_affinity
> > nr_sets because rebalancing the set counts is driver specific. To
> > get around that, drivers using nr_sets have to set min and max to
> > the same value and handle the "reduce and try again".
>
> Sorry I saw that, but didn't follow it at first. After a little
> archaeology, I see that 6da4b3ab9a6e ("genirq/affinity: Add support
> for allocating interrupt sets") added nr_sets and some validation
> tests (if affd.nr_sets, min_vecs == max_vecs) for using it in the API.
>
> That's sort of a wart on the API, but I don't know if we should live
> with it or try to clean it up somehow.
Yeah, that interface is a bit awkward. I was thinking it would be nice to
thread a driver callback to PCI for the driver to redistribute the sets
as needed and let the PCI handle the retries as before. I am testing
with the following, and seems to work, but I'm getting some unexpected
warnings from blk-mq when I have nvme use it. Still investigating that,
but just throwing this out for early feedback.
---
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 7a1c8a09efa5..e33abb167c19 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1035,13 +1035,6 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
if (maxvec < minvec)
return -ERANGE;
- /*
- * If the caller is passing in sets, we can't support a range of
- * vectors. The caller needs to handle that.
- */
- if (affd && affd->nr_sets && minvec != maxvec)
- return -EINVAL;
-
if (WARN_ON_ONCE(dev->msi_enabled))
return -EINVAL;
@@ -1093,13 +1086,6 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
if (maxvec < minvec)
return -ERANGE;
- /*
- * If the caller is passing in sets, we can't support a range of
- * supported vectors. The caller needs to handle that.
- */
- if (affd && affd->nr_sets && minvec != maxvec)
- return -EINVAL;
-
if (WARN_ON_ONCE(dev->msix_enabled))
return -EINVAL;
@@ -1110,6 +1096,9 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
return -ENOSPC;
}
+ if (nvec != maxvec && affd && affd->recalc_sets)
+ affd->recalc_sets(affd, nvec);
+
rc = __pci_enable_msix(dev, entries, nvec, affd);
if (rc == 0)
return nvec;
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index c672f34235e7..326c9bd05f62 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -249,12 +249,16 @@ struct irq_affinity_notify {
* the MSI(-X) vector space
* @nr_sets: Length of passed in *sets array
* @sets: Number of affinitized sets
+ * @recalc_sets: Recalculate sets when requested allocation failed
+ * @priv: Driver private data
*/
struct irq_affinity {
int pre_vectors;
int post_vectors;
int nr_sets;
int *sets;
+ void (*recalc_sets)(struct irq_affinity *, unsigned int);
+ void *priv;
};
/**
--
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs
2018-12-29 3:26 [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs Ming Lei
2018-12-29 3:26 ` [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity Ming Lei
@ 2019-01-14 13:13 ` John Garry
1 sibling, 0 replies; 8+ messages in thread
From: John Garry @ 2019-01-14 13:13 UTC (permalink / raw)
To: Ming Lei, linux-nvme, Christoph Hellwig
Cc: Shan Hai, Keith Busch, Jens Axboe, linux-pci, Bjorn Helgaas, Linuxarm
On 29/12/2018 03:26, Ming Lei wrote:
> Hi,
>
> The 1st one fixes the case that -EINVAL is returned from pci_alloc_irq_vectors_affinity(),
> and it is found without this patch QEMU may fallback to single queue if CPU cores is >= 64.
>
> The 2st one fixes the case that -ENOSPC is returned from pci_alloc_irq_vectors_affinity(),
> and boot failure is observed on aarch64 system with less irq vectors.
>
> The last one introduces modules parameter of 'default_queues' for addressing irq vector
> exhaustion issue reported by Shan Hai.
>
> Ming Lei (3):
> PCI/MSI: preference to returning -ENOSPC from
> pci_alloc_irq_vectors_affinity
> nvme pci: fix nvme_setup_irqs()
> nvme pci: introduce module parameter of 'default_queues'
>
> drivers/nvme/host/pci.c | 31 ++++++++++++++++++++++---------
> drivers/pci/msi.c | 20 +++++++++++---------
> 2 files changed, 33 insertions(+), 18 deletions(-)
>
> Cc: Shan Hai <shan.hai@oracle.com>
> Cc: Keith Busch <keith.busch@intel.com>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: linux-pci@vger.kernel.org,
> Cc: Bjorn Helgaas <bhelgaas@google.com>,
>
Hi Ming,
Will this series fix this warning I see in 5.0-rc1/2 on my arm64 system:
[ 19.688158] WARNING: CPU: 50 PID: 256 at drivers/pci/msi.c:1269
pci_irq_get_affinity+0x3c/0x90
[ 19.701397] Modules linked in:
[ 19.704442] CPU: 50 PID: 256 Comm: kworker/u131:0 Not tainted
5.0.0-rc2-dirty #1027
[ 19.712084] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - B601 (V6.01) 11/08/2018
[ 19.719625] iommu: Adding device 0000:7d:00.1 to group 4
[ 19.720860] Workqueue: nvme-reset-wq nvme_reset_work
[ 19.720865] pstate: 60c00009 (nZCv daif +PAN +UAO)
[ 19.726921] hns3 0000:7d:00.1: The firmware version is b0311019
[ 19.731116] pc : pci_irq_get_affinity+0x3c/0x90
[ 19.731121] lr : blk_mq_pci_map_queues+0x44/0xf0
[ 19.731122] sp : ffff000012c33b90
[ 19.731126] x29: ffff000012c33b90 x28: 0000000000000000
[ 19.746325] x27: 0000000000000000 x26: ffff000010f2ccf8
[ 19.746330] x25: ffff8a23d9de0008 x24: ffff0000111fd000
[ 19.774813] x23: ffff8a23e9232000 x22: 0000000000000001
[ 19.780113] x21: ffff0000111fda84 x20: ffff8a23d9ee9280
[ 19.790713] x19: 0000000000000017 x18: ffffffffffffffff
[ 19.790716] x17: 0000000000000001 x16: 0000000000000019
[ 19.790717] x15: ffff0000111fd6c8 x14: ffff000092c33907
[ 19.790721] x13: ffff000012c33915 x12: ffff000011215000
[ 19.801926] x11: 0000000005f5e0ff x10: ffff7e288f66bc80
[ 19.801929] x9 : 0000000000000000 x8 : ffff8a23d9af2100
[ 19.812530] x7 : 0000000000000000 x6 : 000000000000003f
[ 19.812533] x5 : 0000000000000040 x4 : 3000000000000000
[ 19.827474] x3 : 0000000000000018 x2 : ffff8a23e92322c0
[ 19.837466] x1 : 0000000000000018 x0 : ffff8a23e92322c0
[ 19.837469] Call trace:
[ 19.837472] pci_irq_get_affinity+0x3c/0x90
[ 19.837476] nvme_pci_map_queues+0x90/0xe0
[ 19.848074] blk_mq_update_queue_map+0xbc/0xd8
[ 19.848078] blk_mq_alloc_tag_set+0x1d8/0x338
[ 19.858675] nvme_reset_work+0x1030/0x13f0
[ 19.858682] process_one_work+0x1e0/0x318
[ 19.858687] worker_thread+0x228/0x450
[ 19.872323] kthread+0x128/0x130
I can't see much on lists about this issue. Full log at bottom.
Thanks,
John
[ 0.000000] Booting Linux on physical CPU 0x0000010000 [0x480fd010]
[ 0.000000] Linux version 5.0.0-rc2-dirty
(johnpgarry@johnpgarry-ThinkCentre-M93p) (gcc version 7.3.1 20180425
[linaro-7.3-2018.05-rc1 revision
38aec9a676236eaa42ca03ccb3a6c1dd0182c29f] (Linaro GCC 7.3-2018.05-rc1))
#1027 SMP PREEMPT Mon Jan 14 12:46:02 GMT 2019
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS 3.0=0x3f2a0000 ACPI 2.0=0x3a000000
MEMATTR=0x3b845018 ESRT=0x3e5cce18 MEMRESERVE=0x3a2b1e98
[ 0.000000] esrt: Reserving ESRT space from 0x000000003e5cce18 to
0x000000003e5cce50.
[ 0.000000] crashkernel reserved: 0x0000000002000000 -
0x0000000012000000 (256 MB)
[ 0.000000] cma: Reserved 32 MiB at 0x000000003c400000
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003A000000 000024 (v02 HISI )
[ 0.000000] ACPI: XSDT 0x0000000039FF0000 00009C (v01 HISI HIP08
00000000 01000013)
[ 0.000000] ACPI: FACP 0x0000000039AD0000 000114 (v06 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: DSDT 0x0000000039A50000 00618A (v02 HISI HIP08
00000000 INTL 20170929)
[ 0.000000] ACPI: BERT 0x0000000039F50000 000030 (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: HEST 0x0000000039F40000 00013C (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: ERST 0x0000000039F20000 000230 (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: EINJ 0x0000000039F10000 000170 (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: GTDT 0x0000000039AC0000 000060 (v02 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: DBG2 0x0000000039AB0000 00005A (v00 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: MCFG 0x0000000039AA0000 00003C (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: SLIT 0x0000000039A90000 00003C (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: SRAT 0x0000000039A70000 000774 (v03 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: APIC 0x0000000039A60000 001E58 (v04 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: IORT 0x0000000039A40000 0010F4 (v00 HISI HIP08
00000000 INTL 20170929)
[ 0.000000] ACPI: PPTT 0x0000000031870000 002A30 (v01 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: SPMI 0x0000000031860000 000041 (v05 HISI HIP08
00000000 HISI 20151124)
[ 0.000000] ACPI: iBFT 0x0000000039A80000 000800 (v01 HISI HIP08
00000000 00000000)
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x2080000000-0x23ffffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0xa2000000000-0xa23ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x23ffffe840-0x23ffffffff]
[ 0.000000] NUMA: Initmem setup node 1 [<memory-less node>]
[ 0.000000] NUMA: NODE_DATA [mem 0xa23fc1e1840-0xa23fc1e2fff]
[ 0.000000] NUMA: NODE_DATA(1) on node 3
[ 0.000000] NUMA: Initmem setup node 2 [<memory-less node>]
[ 0.000000] NUMA: NODE_DATA [mem 0xa23fc1e0080-0xa23fc1e183f]
[ 0.000000] NUMA: NODE_DATA(2) on node 3
[ 0.000000] NUMA: NODE_DATA [mem 0xa23fc1de8c0-0xa23fc1e007f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000a23ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000312a2fff]
[ 0.000000] node 0: [mem 0x00000000312a3000-0x000000003185ffff]
[ 0.000000] node 0: [mem 0x0000000031860000-0x0000000039adffff]
[ 0.000000] node 0: [mem 0x0000000039ae0000-0x0000000039aeffff]
[ 0.000000] node 0: [mem 0x0000000039af0000-0x0000000039afffff]
[ 0.000000] node 0: [mem 0x0000000039b00000-0x0000000039cdffff]
[ 0.000000] node 0: [mem 0x0000000039ce0000-0x0000000039d0ffff]
[ 0.000000] node 0: [mem 0x0000000039d10000-0x0000000039e4ffff]
[ 0.000000] node 0: [mem 0x0000000039e50000-0x0000000039f39fff]
[ 0.000000] node 0: [mem 0x0000000039f3a000-0x0000000039f3ffff]
[ 0.000000] node 0: [mem 0x0000000039f40000-0x0000000039f5ffff]
[ 0.000000] node 0: [mem 0x0000000039f60000-0x0000000039feffff]
[ 0.000000] node 0: [mem 0x0000000039ff0000-0x000000003a00ffff]
[ 0.000000] node 0: [mem 0x000000003a010000-0x000000003a2affff]
[ 0.000000] node 0: [mem 0x000000003a2b0000-0x000000003a2b1fff]
[ 0.000000] node 0: [mem 0x000000003a2b2000-0x000000003a2bbfff]
[ 0.000000] node 0: [mem 0x000000003a2bc000-0x000000003f29ffff]
[ 0.000000] node 0: [mem 0x000000003f2a0000-0x000000003f2cffff]
[ 0.000000] node 0: [mem 0x000000003f2d0000-0x000000003fbfffff]
[ 0.000000] node 0: [mem 0x0000002080000000-0x00000023ffffffff]
[ 0.000000] node 3: [mem 0x00000a2000000000-0x00000a23ffffffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 1165 pages
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000023ffffffff]
[ 0.000000] On node 0 totalpages: 3931136
[ 0.000000] DMA32 zone: 4080 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 261120 pages, LIFO batch:63
[ 0.000000] Normal zone: 57344 pages used for memmap
[ 0.000000] Normal zone: 3670016 pages, LIFO batch:63
[ 0.000000] Could not find start_pfn for node 1
[ 0.000000] Initmem setup node 1 [mem
0x0000000000000000-0x0000000000000000]
[ 0.000000] On node 1 totalpages: 0
[ 0.000000] Could not find start_pfn for node 2
[ 0.000000] Initmem setup node 2 [mem
0x0000000000000000-0x0000000000000000]
[ 0.000000] On node 2 totalpages: 0
[ 0.000000] Initmem setup node 3 [mem
0x00000a2000000000-0x00000a23ffffffff]
[ 0.000000] On node 3 totalpages: 4194304
[ 0.000000] Normal zone: 65536 pages used for memmap
[ 0.000000] Normal zone: 4194304 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10000 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10001 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10002 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10003 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10100 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10101 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10102 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10103 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10200 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10201 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10202 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10203 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10300 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10301 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10302 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10303 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10400 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10401 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10402 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10403 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10500 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10501 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10502 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10503 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30000 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30001 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30002 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30003 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30100 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30101 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30102 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30103 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30200 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30201 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30202 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30203 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30300 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30301 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30302 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30303 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30400 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30401 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30402 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30403 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30500 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30501 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30502 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30503 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50000 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50001 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50002 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50003 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50100 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50101 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50102 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50103 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50200 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50201 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50202 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50203 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50300 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50301 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50302 -> Node 2
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50303 -> Node 2
[ 0.000000] random: get_random_bytes called from
start_kernel+0xa8/0x408 with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55960
r8192 d30056 u94208
[ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0]
06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0]
14 [0] 15
[ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0]
22 [0] 23
[ 0.000000] pcpu-alloc: [1] 24 [1] 25 [1] 26 [1] 27 [1] 28 [1] 29 [1]
30 [1] 31
[ 0.000000] pcpu-alloc: [1] 32 [1] 33 [1] 34 [1] 35 [1] 36 [1] 37 [1]
38 [1] 39
[ 0.000000] pcpu-alloc: [1] 40 [1] 41 [1] 42 [1] 43 [1] 44 [1] 45 [1]
46 [1] 47
[ 0.000000] pcpu-alloc: [2] 48 [2] 49 [2] 50 [2] 51 [2] 52 [2] 53 [2]
54 [2] 55
[ 0.000000] pcpu-alloc: [2] 56 [2] 57 [2] 58 [2] 59 [2] 60 [2] 61 [2]
62 [2] 63
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] Built 4 zonelists, mobility grouping on. Total pages:
7998480
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/john/Image rdinit=/init
crashkernel=256M@32M earlycon console=ttyAMA0,115200 acpi=force
pcie_aspm=off scsi_mod.use_blk_mq=y no_console_suspend
[ 0.000000] PCIe ASPM is disabled
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096
bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 258048
bytes
[ 0.000000] printk: log_buf_len min size: 131072 bytes
[ 0.000000] printk: log_buf_len: 524288 bytes
[ 0.000000] printk: early log buf free: 118496(90%)
[ 0.000000] software IO TLB: mapped [mem 0x35a40000-0x39a40000] (64MB)
[ 0.000000] Memory: 31267276K/32501760K available (11068K kernel
code, 1606K rwdata, 5344K rodata, 1408K init, 381K bss, 1201716K
reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=4
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: VLPI support, direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 10000 region
0:0x00000000ae100000
[ 0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
[ 0.000000] ITS [mem 0x202100000-0x20211ffff]
[ 0.000000] ITS@0x0000000202100000: Using ITS number 0
[ 0.000000] ITS@0x0000000202100000: allocated 8192 Devices
@23f0560000 (indirect, esz 8, psz 16K, shr 1)
[ 0.000000] ITS@0x0000000202100000: allocated 2048 Virtual CPUs
@23f0548000 (indirect, esz 16, psz 4K, shr 1)
[ 0.000000] ITS@0x0000000202100000: allocated 256 Interrupt
Collections @23f0547000 (flat, esz 16, psz 4K, shr 1)
[ 0.000000] GICv3: using LPI property table @0x00000023f0570000
[ 0.000000] ITS: Using DirectLPI for VPE invalidation
[ 0.000000] ITS: Enabling GICv4 support
[ 0.000000] GICv3: CPU0: using allocated LPI pending table
@0x00000023f0580000
[ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[ 0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps
every 4398046511100ns
[ 0.000137] Console: colour dummy device 80x25
[ 0.000184] mempolicy: Enabling automatic NUMA balancing. Configure
with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000198] ACPI: Core revision 20181213
[ 0.000343] Calibrating delay loop (skipped), value calculated using
timer frequency.. 200.00 BogoMIPS (lpj=400000)
[ 0.000346] pid_max: default: 65536 minimum: 512
[ 0.000390] LSM: Security Framework initializing
[ 0.006682] Dentry cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.009803] Inode-cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.009936] Mount-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.010050] Mountpoint-cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.036041] ASID allocator initialised with 32768 entries
[ 0.044034] rcu: Hierarchical SRCU implementation.
[ 0.052048] Platform MSI: ITS@0x202100000 domain created
[ 0.052057] PCI/MSI: ITS@0x202100000 domain created
[ 0.052099] Remapping and enabling EFI services.
[ 0.060044] smp: Bringing up secondary CPUs ...
[ 0.107342] Detected VIPT I-cache on CPU1
[ 0.107350] GICv3: CPU1: found redistributor 10001 region
1:0x00000000ae140000
[ 0.107356] GICv3: CPU1: using allocated LPI pending table
@0x00000023f0590000
[ 0.107368] CPU1: Booted secondary processor 0x0000010001 [0x480fd010]
[ 0.154548] Detected VIPT I-cache on CPU2
[ 0.154553] GICv3: CPU2: found redistributor 10002 region
2:0x00000000ae180000
[ 0.154559] GICv3: CPU2: using allocated LPI pending table
@0x00000023f05a0000
[ 0.154568] CPU2: Booted secondary processor 0x0000010002 [0x480fd010]
[ 0.201755] Detected VIPT I-cache on CPU3
[ 0.201761] GICv3: CPU3: found redistributor 10003 region
3:0x00000000ae1c0000
[ 0.201766] GICv3: CPU3: using allocated LPI pending table
@0x00000023f05b0000
[ 0.201775] CPU3: Booted secondary processor 0x0000010003 [0x480fd010]
[ 0.248956] Detected VIPT I-cache on CPU4
[ 0.248964] GICv3: CPU4: found redistributor 10100 region
4:0x00000000ae200000
[ 0.248972] GICv3: CPU4: using allocated LPI pending table
@0x00000023f05c0000
[ 0.248986] CPU4: Booted secondary processor 0x0000010100 [0x480fd010]
[ 0.296161] Detected VIPT I-cache on CPU5
[ 0.296167] GICv3: CPU5: found redistributor 10101 region
5:0x00000000ae240000
[ 0.296172] GICv3: CPU5: using allocated LPI pending table
@0x00000023f05d0000
[ 0.296182] CPU5: Booted secondary processor 0x0000010101 [0x480fd010]
[ 0.343370] Detected VIPT I-cache on CPU6
[ 0.343376] GICv3: CPU6: found redistributor 10102 region
6:0x00000000ae280000
[ 0.343382] GICv3: CPU6: using allocated LPI pending table
@0x00000023f05e0000
[ 0.343392] CPU6: Booted secondary processor 0x0000010102 [0x480fd010]
[ 0.390579] Detected VIPT I-cache on CPU7
[ 0.390586] GICv3: CPU7: found redistributor 10103 region
7:0x00000000ae2c0000
[ 0.390592] GICv3: CPU7: using allocated LPI pending table
@0x00000023f05f0000
[ 0.390602] CPU7: Booted secondary processor 0x0000010103 [0x480fd010]
[ 0.437799] Detected VIPT I-cache on CPU8
[ 0.437808] GICv3: CPU8: found redistributor 10200 region
8:0x00000000ae300000
[ 0.437815] GICv3: CPU8: using allocated LPI pending table
@0x00000023f0600000
[ 0.437827] CPU8: Booted secondary processor 0x0000010200 [0x480fd010]
[ 0.485007] Detected VIPT I-cache on CPU9
[ 0.485014] GICv3: CPU9: found redistributor 10201 region
9:0x00000000ae340000
[ 0.485020] GICv3: CPU9: using allocated LPI pending table
@0x00000023f0610000
[ 0.485029] CPU9: Booted secondary processor 0x0000010201 [0x480fd010]
[ 0.532217] Detected VIPT I-cache on CPU10
[ 0.532224] GICv3: CPU10: found redistributor 10202 region
10:0x00000000ae380000
[ 0.532230] GICv3: CPU10: using allocated LPI pending table
@0x00000023f0620000
[ 0.532240] CPU10: Booted secondary processor 0x0000010202 [0x480fd010]
[ 0.579427] Detected VIPT I-cache on CPU11
[ 0.579435] GICv3: CPU11: found redistributor 10203 region
11:0x00000000ae3c0000
[ 0.579441] GICv3: CPU11: using allocated LPI pending table
@0x00000023f0630000
[ 0.579450] CPU11: Booted secondary processor 0x0000010203 [0x480fd010]
[ 0.626636] Detected VIPT I-cache on CPU12
[ 0.626645] GICv3: CPU12: found redistributor 10300 region
12:0x00000000ae400000
[ 0.626652] GICv3: CPU12: using allocated LPI pending table
@0x00000023f0640000
[ 0.626665] CPU12: Booted secondary processor 0x0000010300 [0x480fd010]
[ 0.673843] Detected VIPT I-cache on CPU13
[ 0.673850] GICv3: CPU13: found redistributor 10301 region
13:0x00000000ae440000
[ 0.673857] GICv3: CPU13: using allocated LPI pending table
@0x00000023f0650000
[ 0.673867] CPU13: Booted secondary processor 0x0000010301 [0x480fd010]
[ 0.721053] Detected VIPT I-cache on CPU14
[ 0.721061] GICv3: CPU14: found redistributor 10302 region
14:0x00000000ae480000
[ 0.721067] GICv3: CPU14: using allocated LPI pending table
@0x00000023f0660000
[ 0.721077] CPU14: Booted secondary processor 0x0000010302 [0x480fd010]
[ 0.768262] Detected VIPT I-cache on CPU15
[ 0.768270] GICv3: CPU15: found redistributor 10303 region
15:0x00000000ae4c0000
[ 0.768276] GICv3: CPU15: using allocated LPI pending table
@0x00000023f0670000
[ 0.768286] CPU15: Booted secondary processor 0x0000010303 [0x480fd010]
[ 0.815486] Detected VIPT I-cache on CPU16
[ 0.815495] GICv3: CPU16: found redistributor 10400 region
16:0x00000000ae500000
[ 0.815503] GICv3: CPU16: using allocated LPI pending table
@0x00000023f0680000
[ 0.815516] CPU16: Booted secondary processor 0x0000010400 [0x480fd010]
[ 0.862691] Detected VIPT I-cache on CPU17
[ 0.862699] GICv3: CPU17: found redistributor 10401 region
17:0x00000000ae540000
[ 0.862705] GICv3: CPU17: using allocated LPI pending table
@0x00000023f0690000
[ 0.862716] CPU17: Booted secondary processor 0x0000010401 [0x480fd010]
[ 0.909902] Detected VIPT I-cache on CPU18
[ 0.909910] GICv3: CPU18: found redistributor 10402 region
18:0x00000000ae580000
[ 0.909916] GICv3: CPU18: using allocated LPI pending table
@0x00000023f06a0000
[ 0.909926] CPU18: Booted secondary processor 0x0000010402 [0x480fd010]
[ 0.957112] Detected VIPT I-cache on CPU19
[ 0.957120] GICv3: CPU19: found redistributor 10403 region
19:0x00000000ae5c0000
[ 0.957127] GICv3: CPU19: using allocated LPI pending table
@0x00000023f06b0000
[ 0.957137] CPU19: Booted secondary processor 0x0000010403 [0x480fd010]
[ 1.004314] Detected VIPT I-cache on CPU20
[ 1.004324] GICv3: CPU20: found redistributor 10500 region
20:0x00000000ae600000
[ 1.004333] GICv3: CPU20: using allocated LPI pending table
@0x00000023f06c0000
[ 1.004346] CPU20: Booted secondary processor 0x0000010500 [0x480fd010]
[ 1.051522] Detected VIPT I-cache on CPU21
[ 1.051531] GICv3: CPU21: found redistributor 10501 region
21:0x00000000ae640000
[ 1.051537] GICv3: CPU21: using allocated LPI pending table
@0x00000023f06d0000
[ 1.051548] CPU21: Booted secondary processor 0x0000010501 [0x480fd010]
[ 1.098733] Detected VIPT I-cache on CPU22
[ 1.098742] GICv3: CPU22: found redistributor 10502 region
22:0x00000000ae680000
[ 1.098749] GICv3: CPU22: using allocated LPI pending table
@0x00000023f06e0000
[ 1.098759] CPU22: Booted secondary processor 0x0000010502 [0x480fd010]
[ 1.145944] Detected VIPT I-cache on CPU23
[ 1.145953] GICv3: CPU23: found redistributor 10503 region
23:0x00000000ae6c0000
[ 1.145960] GICv3: CPU23: using allocated LPI pending table
@0x00000023f06f0000
[ 1.145970] CPU23: Boo found redistributor 30000 region
24:0x00000000aa100000
[ 1.193264] GICv3: CPU24: using allocated LPI pending table
@0x00000023f0700000
[ 1.193285] CPU24: Booted secondary processor 0x0000030000 [0x480fd010]
[ 1.240427] Detected VIPT I-cache on CPU25
[ 1.240439] GICv3: CPU25: found redistributor 30001 region
25:0x00000000aa140000
[ 1.240447] GICv3: CPU25: using allocated LPI pending table
@0x00000023f0710000
[ 1.240459] CPU25: Booted secondary processor 0x0000030001 [0x480fd010]
[ 1.287642] Detected VIPT I-cache on CPU26
[ 1.287655] GICv3: CPU26: found redistributor 30002 region
26:0x00000000aa180000
[ 1.287662] GICv3: CPU26: using allocated LPI pending table
@0x00000023f0720000
[ 1.287676] CPU26: Booted secondary processor 0x0000030002 [0x480fd010]
[ 1.334858] Detected VIPT I-cache on CPU27
[ 1.334871] GICv3: CPU27: found redistributor 30003 region
27:0x00000000aa1c0000
[ 1.334878] GICv3: CPU27: using allocated LPI pending table
@0x00000023f0730000
[ 1.334891] CPU27: Booted secondary processor 0x0000030003 [0x480fd010]
[ 1.382072] Detected VIPT I-cache on CPU28
[ 1.382089] GICv3: CPU28: found redistributor 30100 region
28:0x00000000aa200000
[ 1.382100] GICv3: CPU28: using allocated LPI pending table
@0x00000023f0740000
[ 1.382118] CPU28: Booted secondary processor 0x0000030100 [0x480fd010]
[ 1.429283] Detected VIPT I-cache on CPU29
[ 1.429297] GICv3: CPU29: found redistributor 30101 region
29:0x00000000aa240000
[ 1.429305] GICv3: CPU29: using allocated LPI pending table
@0x00000023f0750000
[ 1.429318] CPU29: Booted secondary processor 0x0000030101 [0x480fd010]
[ 1.476503] Detected VIPT I-cache on CPU30
[ 1.476516] GICv3: CPU30: found redistributor 30102 region
30:0x00000000aa280000
[ 1.476524] GICv3: CPU30: using allocated LPI pending table
@0x00000023f0760000
[ 1.476538] CPU30: Booted secondary processor 0x0000030102 [0x480fd010]
[ 1.523719] Detected VIPT I-cache on CPU31
[ 1.523734] GICv3: CPU31: found redistributor 30103 region
31:0x00000000aa2c0000
[ 1.523742] GICv3: CPU31: using allocated LPI pending table
@0x00000023f0770000
[ 1.523755] CPU31: Booted secondary processor 0x0000030103 [0x480fd010]
[ 1.570949] Detected VIPT I-cache on CPU32
[ 1.570966] GICv3: CPU32: found redistributor 30200 region
32:0x00000000aa300000
[ 1.570977] GICv3: CPU32: using allocated LPI pending table
@0x00000023f0780000
[ 1.570993] CPU32: Booted secondary processor 0x0000030200 [0x480fd010]
[ 1.618164] Detected VIPT I-cache on CPU33
[ 1.618178] GICv3: CPU33: found redistributor 30201 region
33:0x00000000aa340000
[ 1.618187] GICv3: CPU33: using allocated LPI pending table
@0x00000023f0790000
[ 1.618200] CPU33: Booted secondary processor 0x0000030201 [0x480fd010]
[ 1.665380] Detected VIPT I-cache on CPU34
[ 1.665394] GICv3: CPU34: found redistributor 30202 region
34:0x00000000aa380000
[ 1.665402] GICv3: CPU34: using allocated LPI pending table
@0x00000023f07a0000
[ 1.665415] CPU34: Booted secondary processor 0x0000030202 [0x480fd010]
[ 1.712596] Detected VIPT I-cache on CPU35
[ 1.712610] GICv3: CPU35: found redistributor 30203 region
35:0x00000000aa3c0000
[ 1.712617] GICv3: CPU35: using allocated LPI pending table
@0x00000023f07b0000
[ 1.712630] CPU35: Booted secondary processor 0x0000030203 [0x480fd010]
[ 1.759812] Detected VIPT I-cache on CPU36
[ 1.759830] GICv3: CPU36: found redistributor 30300 region
36:0x00000000aa400000
[ 1.759840] GICv3: CPU36: using allocated LPI pending table
@0x00000023f07c0000
[ 1.759858] CPU36: Booted secondary processor 0x0000030300 [0x480fd010]
[ 1.807027] Detected VIPT I-cache on CPU37
[ 1.807042] GICv3: CPU37: found redistributor 30301 region
37:0x00000000aa440000
[ 1.807051] GICv3: CPU37: using allocated LPI pending table
@0x00000023f07d0000
[ 1.807064] CPU37: Booted secondary processor 0x0000030301 [0x480fd010]
[ 1.854242] Detected VIPT I-cache on CPU38
[ 1.854257] GICv3: CPU38: found redistributor 30302 region
38:0x00000000aa480000
[ 1.854266] GICv3: CPU38: using allocated LPI pending table
@0x00000023f07e0000
[ 1.854280] CPU38: Booted secondary processor 0x0000030302 [0x480fd010]
[ 1.901458] Detected VIPT I-cache on CPU39
[ 1.901473] GICv3: CPU39: found redistributor 30303 region
39:0x00000000aa4c0000
[ 1.901481] GICv3: CPU39: using allocated LPI pending table
@0x00000023f07f0000
[ 1.901495] CPU39: Booted secondary processor 0x0000030303 [0x480fd010]
[ 1.948677] Detected VIPT I-cache on CPU40
[ 1.948696] GICv3: CPU40: found redistributor 30400 region
40:0x00000000aa500000
[ 1.948706] GICv3: CPU40: using allocated LPI pending table
@0x00000023efc00000
[ 1.948723] CPU40: Booted secondary processor 0x0000030400 [0x480fd010]
[ 1.995891] Detected VIPT I-cache on CPU41
[ 1.995905] GICv3: CPU41: found redistributor 30401 region
41:0x00000000aa540000
[ 1.995914] GICv3: CPU41: using allocated LPI pending table
@0x00000023efc10000
[ 1.995928] CPU41: Booted secondary processor 0x0000030401 [0x480fd010]
[ 2.043108] Detected VIPT I-cache on CPU42
[ 2.043123] GICv3: CPU42: found redistributor 30402 region
42:0x00000000aa580000
[ 2.043132] GICv3: CPU42: using allocated LPI pending table
@0x00000023efc20000
[ 2.043146] CPU42: Booted secondary processor 0x0000030402 [0x480fd010]
[ 2.090325] Detected VIPT I-cache on CPU43
[ 2.090341] GICv3: CPU43: found redistributor 30403 region
43:0x00000000aa5c0000
[ 2.090349] GICv3: CPU43: using allocated LPI pending table
@0x00000023efc30000
[ 2.090362] CPU43: Booted secondary processor 0x0000030403 [0x480fd010]
[ 2.137541] Detected VIPT I-cache on CPU44
[ 2.137560] GICv3: CPU44: found redistributor 30500 region
44:0x00000000aa600000
[ 2.137573] GICv3: CPU44: using allocated LPI pending table
@0x00000023efc40000
[ 2.137590] CPU44: Booted secondary processor 0x0000030500 [0x480fd010]
[ 2.184753] Detected VIPT I-cache on CPU45
[ 2.184769] GICv3: CPU45: found redistributor 30501 region
45:0x00000000aa640000
[ 2.184778] GICv3: CPU45: using allocated LPI pending table
@0x00000023efc50000
[ 2.184792] CPU45: Booted secondary processor 0x0000030501 [0x480fd010]
[ 2.231972] Detected VIPT I-cache on CPU46
[ 2.231988] GICv3: CPU46: found redistributor 30502 region
46:0x00000000aa680000
[ 2.231997] GICv3: CPU46: using allocated LPI pending table
@0x00000023efc60000
[ 2.232010] CPU46: Booted secondary processor 0x0000030502 [0x480fd010]
[ 2.279190] Detected VIPT I-cache on CPU47
[ 2.279206] GICv3: CPU47: found redistributor 30503 region
47:0x00000000aa6c0000
[ 2.279215] GICv3: CPU47: using allocated LPI pending table
@0x00000023efc70000
[ 2.279230] CPU47: Booted secondary processor 0x0000030503 [0x480fd010]
[ 2.326845] Detected VIPT I-cache on CPU48
[ 2.326886] GICv3: CPU48: found redistributor 50000 region
48:0x00004000ae100000
[ 2.326912] GICv3: CPU48: using allocated LPI pending table
@0x00000023efc80000
[ 2.326936] CPU48: Booted secondary processor 0x0000050000 [0x480fd010]
[ 2.374311] Detected VIPT I-cache on CPU49
[ 2.374341] GICv3: CPU49: found redistributor 50001 region
49:0x00004000ae140000
[ 2.374350] GICv3: CPU49: using allocated LPI pending table
@0x00000023efc90000
[ 2.374362] CPU49: Booted secondary processor 0x0000050001 [0x480fd010]
[ 2.421795] Detected VIPT I-cache on CPU50
[ 2.421827] GICv3: CPU50: found redistributor 50002 region
50:0x00004000ae180000
[ 2.421846] GICv3: CPU50: using allocated LPI pending table
@0x00000023efca0000
[ 2.421858] CPU50: Booted secondary processor 0x0000050002 [0x480fd010]
[ 2.469275] Detected VIPT I-cache on CPU51
[ 2.469306] GICv3: CPU51: found redistributor 50003 region
51:0x00004000ae1c0000
[ 2.469315] GICv3: CPU51: using allocated LPI pending table
@0x00000023efcb0000
[ 2.469327] CPU51: Booted secondary processor 0x0000050003 [0x480fd010]
[ 2.516759] Detected VIPT I-cache on CPU52
[ 2.516793] GICv3: CPU52: found redistributor 50100 region
52:0x00004000ae200000
[ 2.516808] GICv3: CPU52: using allocated LPI pending table
@0x00000023efcc0000
[ 2.516823] CPU52: Booted secondary processor 0x0000050100 [0x480fd010]
[ 2.564240] Detected VIPT I-cache on CPU53
[ 2.564271] GICv3: CPU53: found redistributor 50101 region
53:0x00004000ae240000
[ 2.564280] GICv3: CPU53: using allocated LPI pending table
@0x00000023efcd0000
[ 2.564293] CPU53: Booted secondary processor 0x0000050101 [0x480fd010]
[ 2.611722] Detected VIPT I-cache on CPU54
[ 2.611754
] GICv3: CPU54: found redistributor 50102 region 54:0x00004000ae280000
[ 2.611763] GICv3: CPU54: using allocated LPI pending table
@0x00000023efce0000
[ 2.611776] CPU54: Booted secondary processor 0x0000050102 [0x480fd010]
[ 2.659206] Detected VIPT I-cache on CPU55
[ 2.659238] GICv3: CPU55: found redistributor 50103 region
55:0x00004000ae2c0000
[ 2.659247] GICv3: CPU55: using allocated LPI pending table
@0x00000023efcf0000
[ 2.659259] CPU55: Booted secondary processor 0x0000050103 [0x480fd010]
[ 2.706695] Detected VIPT I-cache on CPU56
[ 2.706729] GICv3: CPU56: found redistributor 50200 region
56:0x00004000ae300000
[ 2.706746] GICv3: CPU56: using allocated LPI pending table
@0x00000023efd00000
[ 2.706761] CPU56: Booted secondary processor 0x0000050200 [0x480fd010]
[ 2.754176] Detected VIPT I-cache on CPU57
[ 2.754209] GICv3: CPU57: found redistributor 50201 region
57:0x00004000ae340000
[ 2.754218] GICv3: CPU57: using allocated LPI pending table
@0x00000023efd10000
[ 2.754231] CPU57: Booted secondary processor 0x0000050201 [0x480fd010]
[ 2.801660] Detected VIPT I-cache on CPU58
[ 2.801693] GICv3: CPU58: found redistributor 50202 region
58:0x00004000ae380000
[ 2.801703] GICv3: CPU58: using allocated LPI pending table
@0x00000023efd20000
[ 2.801716] CPU58: Booted secondary processor 0x0000050202 [0x480fd010]
[ 2.849143] Detected VIPT I-cache on CPU59
[ 2.849176] GICv3: CPU59: found redistributor 50203 region
59:0x00004000ae3c0000
[ 2.849185] GICv3: CPU59: using allocated LPI pending table
@0x00000023efd30000
[ 2.849198] CPU59: Booted secondary processor 0x0000050203 [0x480fd010]
[ 2.896635] Detected VIPT I-cache on CPU60
[ 2.896670] GICv3: CPU60: found redistributor 50300 region
60:0x00004000ae400000
[ 2.896687] GICv3: CPU60: using allocated LPI pending table
@0x00000023efd40000
[ 2.896702] CPU60: Booted secondary processor 0x0000050300 [0x480fd010]
[ 2.944116] Detected VIPT I-cache on CPU61
[ 2.944150] GICv3: CPU61: found redistributor 50301 region
61:0x00004000ae440000
[ 2.944161] GICv3: CPU61: using allocated LPI pending table
@0x00000023efd50000
[ 2.944175] CPU61: Booted secondary processor 0x0000050301 [0x480fd010]
[ 2.991599] Detected VIPT I-cache on CPU62
[ 2.991633] GICv3: CPU62: found redistributor 50302 region
62:0x00004000ae480000
[ 2.991643] GICv3: CPU62: using allocated LPI pending table
@0x00000023efd60000
[ 2.991656] CPU62: Booted secondary processor 0x0000050302 [0x480fd010]
[ 3.039081] Detected VIPT I-cache on CPU63
[ 3.039115] GICv3: CPU63: found redistributor 50303 region
63:0x00004000ae4c0000
[ 3.039125] GICv3: CPU63: using allocated LPI pending table
@0x00000023efd70000
[ 3.039139] CPU63: Booted secondary processor 0x0000050303 [0x480fd010]
[ 3.039208] smp: Brought up 4 nodes, 64 CPUs
[ 3.039317] SMP: Total of 64 processors activated.
[ 3.039319] CPU features: detected: GIC system register CPU interface
[ 3.039321] CPU features: detected: Privileged Access Never
[ 3.039322] CPU features: detected: LSE atomic instructions
[ 3.039324] CPU features: detected: User Access Override
[ 3.039325] CPU features: detected: Common not Private translations
[ 3.039327] CPU features: detected: RAS Extension Support
[ 3.039329] CPU features: detected: CRC32 instructions
[ 9.112174] CPU: All CPU(s) started at EL2
[ 9.112401] alternatives: patching kernel code
[ 9.120228] devtmpfs: initialized
[ 9.120903] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 9.121043] futex hash table entries: 16384 (order: 8, 1048576 bytes)
[ 9.121763] pinctrl core: initialized pinctrl subsystem
[ 9.122287] SMBIOS 3.1.1 present.
[ 9.122292] DMI: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B601
(V6.01) 11/08/2018
[ 9.122476] NET: Registered protocol family 16
[ 9.123416] audit: initializing netlink subsys (disabled)
[ 9.123542] audit: type=2000 audit(2.344:1): state=initialized
audit_enabled=0 res=1
[ 9.123941] cpuidle: using governor menu
[ 9.124096] vdso: 2 pages (1 code @ (____ptrval____), 1 data @
(____ptrval____))
[ 9.124100] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 9.125107] DMA: preallocated 256 KiB pool for atomic allocations
[ 9.125284] ACPI: bus type PCI registered
[ 9.125287] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 9.125440] Serial: AMBA PL011 UART driver
[ 9.130672] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 9.130676] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 9.130678] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 9.130680] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 9.131174] cryptd: max_cpu_qlen set to 1000
[ 9.132028] ACPI: Added _OSI(Module Device)
[ 9.132031] ACPI: Added _OSI(Processor Device)
[ 9.132033] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 9.132035] ACPI: Added _OSI(Processor Aggregator Device)
[ 9.132037] ACPI: Added _OSI(Linux-Dell-Video)
[ 9.132039] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 9.132042] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 9.134274] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 9.136455] ACPI: Interpreter enabled
[ 9.136458] ACPI: Using GIC for interrupt routing
[ 9.136477] ACPI: MCFG table detected, 1 entries
[ 9.136482] ACPI: IORT: SMMU-v3[148000000] Mapped to Proximity domain 0
[ 9.136532] ACPI: IORT: SMMU-v3[100000000] Mapped to Proximity domain 0
[ 9.136564] ACPI: IORT: SMMU-v3[140000000] Mapped to Proximity domain 0
[ 9.136593] ACPI: IORT: SMMU-v3[400148000000] Mapped to Proximity
domain 2
[ 9.136630] ACPI: IORT: SMMU-v3[400100000000] Mapped to Proximity
domain 2
[ 9.136660] ACPI: IORT: SMMU-v3[400140000000] Mapped to Proximity
domain 2
[ 9.136760] HEST: Table parsing has been initialized.
[ 9.148298] ARMH0011:00: ttyAMA0 at MMIO 0x94080000 (irq = 5,
base_baud = 0) is a SBSA
[ 12.264614] printk: console [ttyAMA0] enabled
[ 12.271521] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 12.277699] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 12.284802] acpi PNP0A08:00: _OSC: not requesting OS control; OS
requires [ExtendedConfig ASPM ClockPM MSI]
[ 12.295356] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem
0xd0000000-0xd3ffffff] not reserved in ACPI namespace
[ 12.305612] acpi PNP0A08:00: ECAM at [mem 0xd0000000-0xd3ffffff] for
[bus 00-3f]
[ 12.313020] Remapped I/O 0x00000000efff0000 to [io 0x0000-0xffff window]
[ 12.319843] PCI host bridge to bus 0000:00
[ 12.323930] pci_bus 0000:00: root bus resource [mem
0x80000000000-0x83fffffffff pref window]
[ 12.332355] pci_bus 0000:00: root bus resource [mem
0xe0000000-0xeffeffff window]
[ 12.339826] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
[ 12.346602] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 12.352082] pci 0000:00:00.0: [19e5:a120] type 01 class 0x060400
[ 12.352152] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352229] pci 0000:00:04.0: [19e5:a120] type 01 class 0x060400
[ 12.352295] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352363] pci 0000:00:08.0: [19e5:a120] type 01 class 0x060400
[ 12.352429] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352496] pci 0000:00:0c.0: [19e5:a120] type 01 class 0x060400
[ 12.352562] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352628] pci 0000:00:10.0: [19e5:a120] type 01 class 0x060400
[ 12.352693] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352760] pci 0000:00:12.0: [19e5:a120] type 01 class 0x060400
[ 12.352826] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 12.352929] pci 0000:01:00.0: [8086:10fb] type 00 class 0x020000
[ 12.352947] pci 0000:01:00.0: reg 0x10: [mem
0x80000080000-0x800000fffff 64bit pref]
[ 12.352952] pci 0000:01:00.0: reg 0x18: [io 0x0020-0x003f]
[ 12.352964] pci 0000:01:00.0: reg 0x20: [mem
0x80000104000-0x80000107fff 64bit pref]
[ 12.352969] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 12.353046] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 12.353070] pci 0000:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit pref]
[ 12.353073] pci 0000:01:00.0: VF(n) BAR0 space: [mem
0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs)
[ 12.363333] pci 0000:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit pref]
[ 12.363336] pci 0000:01:00.0: VF(n) BAR3 space: [mem
0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
[ 12.373798] pci 0000:01:00.1: [8086:10fb] type 00 class 0x020000
[ 12.373816] pci 0000:01:00.1: reg 0x10: [mem
0x80000000000-0x8000007ffff 64bit pref]
[ 12.373821] pci 0000:01:00.1: reg 0x18: [io 0x0000-0x001f]
[ 12.373832] pci 0000:01:00.1: reg 0x20: [mem
0x80000100000-0x80000103fff 64bit pref]
[ 12.373838] pci 0000:01:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 12.373915] pci 0000:01:00.1: PME# supported from D0 D3hot
[ 12.373937] pci 0000:01:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit pref]
[ 12.373939] pci 0000:01:00.1: VF(n) BAR0 space: [mem
0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs)
[ 12.384199] pci 0000:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit pref]
[ 12.384202] pci 0000:01:00.1: VF(n) BAR3 space: [mem
0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
[ 12.394788] pci 0000:05:00.0: [19e5:1711] type 00 class 0x030000
[ 12.394817] pci 0000:05:00.0: reg 0x10: [mem 0xe0000000-0xe1ffffff pref]
[ 12.394829] pci 0000:05:00.0: reg 0x14: [mem 0xe2000000-0xe21fffff]
[ 12.394998] pci 0000:05:00.0: supports D1
[ 12.395000] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 12.395138] pci_bus 0000:00: on NUMA node 0
[ 12.395159] pci 0000:00:10.0: BAR 14: assigned [mem
0xe0000000-0xe2ffffff]
[ 12.402024] pci 0000:00:00.0: BAR 14: assigned [mem
0xe3000000-0xe31fffff]
[ 12.408887] pci 0000:00:00.0: BAR 15: assigned [mem
0x80000000000-0x800005fffff 64bit pref]
[ 12.417225] pci 0000:00:12.0: BAR 14: assigned [mem
0xe3200000-0xe33fffff]
[ 12.424087] pci 0000:00:12.0: BAR 15: assigned [mem
0x80000600000-0x800007fffff 64bit pref]
[ 12.432425] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 12.438593] pci 0000:00:12.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 12.444763] pci 0000:01:00.0: BAR 0: assigned [mem
0x80000000000-0x8000007ffff 64bit pref]
[ 12.453020] pci 0000:01:00.0: BAR 6: assigned [mem
0xe3000000-0xe307ffff pref]
[ 12.460229] pci 0000:01:00.1: BAR 0: assigned [mem
0x80000080000-0x800000fffff 64bit pref]
[ 12.468485] pci 0000:01:00.1: BAR 6: assigned [mem
0xe3080000-0xe30fffff pref]
[ 12.475695] pci 0000:01:00.0: BAR 4: assigned [mem
0x80000100000-0x80000103fff 64bit pref]
[ 12.483951] pci 0000:01:00.0: BAR 7: assigned [mem
0x80000104000-0x80000203fff 64bit pref]
[ 12.492205] pci 0000:01:00.0: BAR 10: assigned [mem
0x80000204000-0x80000303fff 64bit pref]
[ 12.500545] pci 0000:01:00.1: BAR 4: assigned [mem
0x80000304000-0x80000307fff 64bit pref]
[ 12.508804] pci 0000:01:00.1: BAR 7: assigned [mem
0x80000308000-0x80000407fff 64bit pref]
[ 12.517058] pci 0000:01:00.1: BAR 10: assigned [mem
0x80000408000-0x80000507fff 64bit pref]
[ 12.525399] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
[ 12.531482] pci 0000:01:00.1: BAR 2: assigned [io 0x1020-0x103f]
[ 12.537565] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 12.542518] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 12.548599] pci 0000:00:00.0: bridge window [mem 0xe3000000-0xe31fffff]
[ 12.555375] pci 0000:00:00.0: bridge window [mem
0x80000000000-0x800005fffff 64bit pref]
[ 12.563627] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 12.568582] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 12.573538] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 12.578495] pci 0000:05:00.0: BAR 0: assigned [mem
0xe0000000-0xe1ffffff pref]
[ 12.585708] pci 0000:05:00.0: BAR 1: assigned [mem 0xe2000000-0xe21fffff]
[ 12.592485] pci 0000:00:10.0: PCI bridge to [bus 05]
[ 12.597439] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xe2ffffff]
[ 12.604216] pci 0000:00:12.0: PCI bridge to [bus 06]
[ 12.609182] pci 0000:00:12.0: bridge window [io 0x2000-0x2fff]
[ 12.615267] pci 0000:00:12.0: bridge window [mem 0xe3200000-0xe33fffff]
[ 12.622044] pci 0000:00:12.0: bridge window [mem
0x80000600000-0x800007fffff 64bit pref]
[ 12.630337] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 7b])
[ 12.636248] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 12.643287] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND)
[ 12.649306] acpi PNP0A08:01: [Firmware Bug]: ECAM area [mem
0xd7b00000-0xd7bfffff] not reserved in ACPI namespace
[ 12.659572] acpi PNP0A08:01: ECAM at [mem 0xd7b00000-0xd7bfffff] for
[bus 7b]
[ 12.666757] PCI host bridge to bus 0000:7b
[ 12.670844] pci_bus 0000:7b: root bus resource [mem
0x148800000-0x148ffffff pref window]
[ 12.678921] pci_bus 0000:7b: root bus resource [bus 7b]
[ 12.684146] pci_bus 0000:7b: on NUMA node 0
[ 12.684174] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 7a])
[ 12.690084] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 12.697122] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND)
[ 12.703074] acpi PNP0A08:02: [Firmware Bug]: ECAM area [mem
0xd7a00000-0xd7afffff] not reserved in ACPI namespace
[ 12.713332] acpi PNP0A08:02: ECAM at [mem 0xd7a00000-0xd7afffff] for
[bus 7a]
[ 12.720516] PCI host bridge to bus 0000:7a
[ 12.724604] pci_bus 0000:7a: root bus resource [mem
0x20c000000-0x20c1fffff pref window]
[ 12.732683] pci_bus 0000:7a: root bus resource [bus 7a]
[ 12.737900] pci 0000:7a:00.0: [19e5:a239] type 00 class 0x0c0310
[ 12.737906] pci 0000:7a:00.0: reg 0x10: [mem 0x20c100000-0x20c100fff
64bit pref]
[ 12.737967] pci 0000:7a:01.0: [19e5:a239] type 00 class 0x0c0320
[ 12.737974] pci 0000:7a:01.0: reg 0x10: [mem 0x20c101000-0x20c101fff
64bit pref]
[ 12.738033] pci 0000:7a:02.0: [19e5:a238] type 00 class 0x0c0330
[ 12.738039] pci 0000:7a:02.0: reg 0x10: [mem 0x20c000000-0x20c0fffff
64bit pref]
[ 12.738099] pci_bus 0000:7a: on NUMA node 0
[ 12.738103] pci 0000:7a:02.0: BAR 0: assigned [mem
0x20c000000-0x20c0fffff 64bit pref]
[ 12.746010] pci 0000:7a:00.0: BAR 0: assigned [mem
0x20c100000-0x20c100fff 64bit pref]
[ 12.753916] pci 0000:7a:01.0: BAR 0: assigned [mem
0x20c101000-0x20c101fff 64bit pref]
[ 12.761853] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 78-79])
[ 12.768023] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 12.775063] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND)
[ 12.781075] acpi PNP0A08:03: [Firmware Bug]: ECAM area [mem
0xd7800000-0xd79fffff] not reserved in ACPI namespace
[ 12.791326] acpi PNP0A08:03: ECAM at [mem 0xd7800000-0xd79fffff] for
[bus 78-79]
[ 12.798771] PCI host bridge to bus 0000:78
[ 12.802857] pci_bus 0000:78: root bus resource [mem
0x208000000-0x208ffffff pref window]
[ 12.810934] pci_bus 0000:78: root bus resource [bus 78-79]
[ 12.816412] pci 0000:78:00.0: [19e5:a258] type 00 class 0x100000
[ 12.816420] pci 0000:78:00.0: reg 0x18: [mem 0x00000000-0x001fffff
64bit pref]
[ 12.816480] pci_bus 0000:78: on NUMA node 0
[ 12.816483] pci 0000:78:00.0: BAR 2: assigned [mem
0x208000000-0x2081fffff 64bit pref]
[ 12.824416] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 7c-7d])
[ 12.830587] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 12.837628] acpi PNP0A08:04: _OSC failed (AE_NOT_FOUND)
[ 12.843579] acpi PNP0A08:04: [Firmware Bug]: ECAM area [mem
0xd7c00000-0xd7dfffff] not reserved in ACPI namespace
[ 12.853830] acpi PNP0A08:04: ECAM at [mem 0xd7c00000-0xd7dfffff] for
[bus 7c-7d]
[ 12.861277] PCI host bridge to bus 0000:7c
[ 12.865362] pci_bus 0000:7c: root bus resource [mem
0x120000000-0x13fffffff pref window]
[ 12.873440] pci_bus 0000:7c: root bus resource [bus 7c-7d]
[ 12.878918] pci 0000:7c:00.0: [19e5:a121] type 01 class 0x060400
[ 12.878926] pci 0000:7c:00.0: enabling Extended Tags
[ 12.883967] pci 0000:7d:00.0: [19e5:a222] type 00 class 0x020000
[ 12.883974] pci 0000:7d:00.0: reg 0x10: [mem 0x120430000-0x12043ffff
64bit pref]
[ 12.883978] pci 0000:7d:00.0: reg 0x18: [mem 0x120300000-0x1203fffff
64bit pref]
[ 12.884001] pci 0000:7d:00.0: reg 0x224: [mem 0x00000000-0x0000ffff
64bit pref]
[ 12.884004] pci 0000:7d:00.0: VF(n) BAR0 space: [mem
0x00000000-0x000dffff 64bit pref] (contains BAR0 for 14 VFs)
[ 12.894254] pci 0000:7d:00.0: reg 0x22c: [mem 0x00000000-0x000fffff
64bit pref]
[ 12.894257] pci 0000:7d:00.0: VF(n) BAR2 space: [mem
0x00000000-0x00dfffff 64bit pref] (contains BAR2 for 14 VFs)
[ 12.904560] pci 0000:7d:00.1: [19e5:a222] type 00 class 0x020000
[ 12.904567] pci 0000:7d:00.1: reg 0x10: [mem 0x120420000-0x12042ffff
64bit pref]
[ 12.904571] pci 0000:7d:00.1: reg 0x18: [mem 0x120200000-0x1202fffff
64bit pref]
[ 12.904593] pci 0000:7d:00.1: reg 0x224: [mem 0x00000000-0x0000ffff
64bit pref]
[ 12.904595] pci 0000:7d:00.1: VF(n) BAR0 space: [mem
0x00000000-0x000dffff 64bit pref] (contains BAR0 for 14 VFs)
[ 12.914845] pci 0000:7d:00.1: reg 0x22c: [mem 0x00000000-0x000fffff
64bit pref]
[ 12.914848] pci 0000:7d:00.1: VF(n) BAR2 space: [mem
0x00000000-0x00dfffff 64bit pref] (contains BAR2 for 14 VFs)
[ 12.925152] pci 0000:7d:00.2: [19e5:a222] type 00 class 0x020000
[ 12.925158] pci 0000:7d:00.2: reg 0x10: [mem 0x120410000-0x12041ffff
64bit pref]
[ 12.925162] pci 0000:7d:00.2: reg 0x18: [mem 0x120100000-0x1201fffff
64bit pref]
[ 12.925221] pci 0000:7d:00.3: [19e5:a221] type 00 class 0x020000
[ 12.925227] pci 0000:7d:00.3: reg 0x10: [mem 0x120400000-0x12040ffff
64bit pref]
[ 12.925231] pci 0000:7d:00.3: reg 0x18: [mem 0x120000000-0x1200fffff
64bit pref]
[ 12.925291] pci_bus 0000:7c: on NUMA node 0
[ 12.925298] pci 0000:7c:00.0: BAR 15: assigned [mem
0x120000000-0x1221fffff 64bit pref]
[ 12.933291] pci 0000:7d:00.0: BAR 2: assigned [mem
0x120000000-0x1200fffff 64bit pref]
[ 12.941197] pci 0000:7d:00.0: BAR 9: assigned [mem
0x120100000-0x120efffff 64bit pref]
[ 12.949105] pci 0000:7d:00.1: BAR 2: assigned [mem
0x120f00000-0x120ffffff 64bit pref]
[ 12.957011] pci 0000:7d:00.1: BAR 9: assigned [mem
0x121000000-0x121dfffff 64bit pref]
[ 12.964915] pci 0000:7d:00.2: BAR 2: assigned [mem
0x121e00000-0x121efffff 64bit pref]
[ 12.972827] pci 0000:7d:00.3: BAR 2: assigned [mem
0x121f00000-0x121ffffff 64bit pref]
[ 12.980732] pci 0000:7d:00.0: BAR 0: assigned [mem
0x122000000-0x12200ffff 64bit pref]
[ 12.988636] pci 0000:7d:00.0: BAR 7: assigned [mem
0x122010000-0x1220effff 64bit pref]
[ 12.996540] pci 0000:7d:00.1: BAR 0: assigned [mem
0x1220f0000-0x1220fffff 64bit pref]
[ 13.004446] pci 0000:7d:00.1: BAR 7: assigned [mem
0x122100000-0x1221dffff 64bit pref]
[ 13.012351] pci 0000:7d:00.2: BAR 0: assigned [mem
0x1221e0000-0x1221effff 64bit pref]
[ 13.020256] pci 0000:7d:00.3: BAR 0: assigned [mem
0x1221f0000-0x1221fffff 64bit pref]
[ 13.028161] pci 0000:7c:00.0: PCI bridge to [bus 7d]
[ 13.033115] pci 0000:7c:00.0: bridge window [mem
0x120000000-0x1221fffff 64bit pref]
[ 13.041056] ACPI: PCI Root Bridge [PCI5] (domain 0000 [bus 74-76])
[ 13.047226] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.054265] acpi PNP0A08:05: _OSC failed (AE_NOT_FOUND)
[ 13.060253] acpi PNP0A08:05: [Firmware Bug]: ECAM area [mem
0xd7400000-0xd76fffff] not reserved in ACPI namespace
[ 13.070518] acpi PNP0A08:05: ECAM at [mem 0xd7400000-0xd76fffff] for
[bus 74-76]
[ 13.077974] PCI host bridge to bus 0000:74
[ 13.082060] pci_bus 0000:74: root bus resource [mem
0x144000000-0x147ffffff pref window]
[ 13.090138] pci_bus 0000:74: root bus resource [mem
0xa2000000-0xa2ffffff window]
[ 13.097608] pci_bus 0000:74: root bus resource [bus 74-76]
[ 13.103085] pci 0000:74:00.0: [19e5:a121] type 01 class 0x060400
[ 13.103094] pci 0000:74:00.0: enabling Extended Tags
[ 13.108102] pci 0000:74:02.0: [19e5:a230] type 00 class 0x010700
[ 13.108114] pci 0000:74:02.0: reg 0x24: [mem 0xa2000000-0xa2007fff]
[ 13.108179] pci 0000:74:03.0: [19e5:a235] type 00 class 0x010601
[ 13.108191] pci 0000:74:03.0: reg 0x24: [mem 0xa2008000-0xa2008fff]
[ 13.108281] pci 0000:75:00.0: [19e5:a250] type 00 class 0x120000
[ 13.108290] pci 0000:75:00.0: reg 0x18: [mem 0x144000000-0x1443fffff
64bit pref]
[ 13.108316] pci 0000:75:00.0: reg 0x22c: [mem 0x00000000-0x0000ffff
64bit pref]
[ 13.108318] pci 0000:75:00.0: VF(n) BAR2 space: [mem
0x00000000-0x003effff 64bit pref] (contains BAR2 for 63 VFs)
[ 13.118659] pci_bus 0000:74: on NUMA node 0
[ 13.118665] pci 0000:74:00.0: BAR 15: assigned [mem
0x144000000-0x1447fffff 64bit pref]
[ 13.126657] pci 0000:74:02.0: BAR 5: assigned [mem 0xa2000000-0xa2007fff]
[ 13.133434] pci 0000:74:03.0: BAR 5: assigned [mem 0xa2008000-0xa2008fff]
[ 13.140210] pci 0000:75:00.0: BAR 2: assigned [mem
0x144000000-0x1443fffff 64bit pref]
[ 13.148115] pci 0000:75:00.0: BAR 9: assigned [mem
0x144400000-0x1447effff 64bit pref]
[ 13.156020] pci 0000:74:00.0: PCI bridge to [bus 75]
[ 13.160974] pci 0000:74:00.0: bridge window [mem
0x144000000-0x1447fffff 64bit pref]
[ 13.168915] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus 80-9f])
[ 13.175088] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.182187] acpi PNP0A08:06: _OSC: not requesting OS control; OS
requires [ExtendedConfig ASPM ClockPM MSI]
[ 13.192652] acpi PNP0A08:06: [Firmware Bug]: ECAM area [mem
0xd8000000-0xd9ffffff] not reserved in ACPI namespace
[ 13.202904] acpi PNP0A08:06: ECAM at [mem 0xd8000000-0xd9ffffff] for
[bus 80-9f]
[ 13.210310] Remapped I/O 0x00000000ffff0000 to [io 0x10000-0x1ffff
window]
[ 13.217304] PCI host bridge to bus 0000:80
[ 13.221390] pci_bus 0000:80: root bus resource [mem
0x480000000000-0x483fffffffff pref window]
[ 13.229989] pci_bus 0000:80: root bus resource [mem
0xf0000000-0xfffeffff window]
[ 13.237460] pci_bus 0000:80: root bus resource [io 0x10000-0x1ffff
window] (bus address [0x0000-0xffff])
[ 13.247013] pci_bus 0000:80: root bus resource [bus 80-9f]
[ 13.252494] pci 0000:80:00.0: [19e5:a120] type 01 class 0x060400
[ 13.252572] pci 0000:80:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.252652] pci 0000:80:08.0: [19e5:a120] type 01 class 0x060400
[ 13.252727] pci 0000:80:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.252801] pci 0000:80:0c.0: [19e5:a120] type 01 class 0x060400
[ 13.252873] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.252947] pci 0000:80:10.0: [19e5:a120] type 01 class 0x060400
[ 13.253010] pci 0000:80:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.253213] pci 0000:84:00.0: [19e5:0123] type 00 class 0x010802
[ 13.253229] pci 0000:84:00.0: reg 0x10: [mem 0xf0000000-0xf003ffff 64bit]
[ 13.253252] pci 0000:84:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 13.253318] pci 0000:84:00.0: supports D1 D2
[ 13.253320] pci 0000:84:00.0: PME# supported from D3hot
[ 13.253398] pci_bus 0000:80: on NUMA node 2
[ 13.253412] pci 0000:80:10.0: BAR 14: assigned [mem
0xf0000000-0xf00fffff]
[ 13.260276] pci 0000:80:00.0: PCI bridge to [bus 81]
[ 13.265233] pci 0000:80:08.0: PCI bridge to [bus 82]
[ 13.270189] pci 0000:80:0c.0: PCI bridge to [bus 83]
[ 13.275147] pci 0000:84:00.0: BAR 0: assigned [mem
0xf0000000-0xf003ffff 64bit]
[ 13.282448] pci 0000:84:00.0: BAR 6: assigned [mem
0xf0040000-0xf005ffff pref]
[ 13.289661] pci 0000:80:10.0: PCI bridge to [bus 84]
[ 13.294616] pci 0000:80:10.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 13.301427] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus bb])
[ 13.307337] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.314375] acpi PNP0A08:07: _OSC failed (AE_NOT_FOUND)
[ 13.320326] acpi PNP0A08:07: [Firmware Bug]: ECAM area [mem
0xdbb00000-0xdbbfffff] not reserved in ACPI namespace
[ 13.330585] acpi PNP0A08:07: ECAM at [mem 0xdbb00000-0xdbbfffff] for
[bus bb]
[ 13.337769] PCI host bridge to bus 0000:bb
[ 13.341855] pci_bus 0000:bb: root bus resource [mem
0x400148800000-0x400148ffffff pref window]
[ 13.350453] pci_bus 0000:bb: root bus resource [bus bb]
[ 13.355680] pci_bus 0000:bb: on NUMA node 2
[ 13.355706] ACPI: PCI Root Bridge [PCI8] (domain 0000 [bus ba])
[ 13.361615] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.368653] acpi PNP0A08:08: _OSC failed (AE_NOT_FOUND)
[ 13.374596] acpi PNP0A08:08: [Firmware Bug]: ECAM area [mem
0xdba00000-0xdbafffff] not reserved in ACPI namespace
[ 13.384861] acpi PNP0A08:08: ECAM at [mem 0xdba00000-0xdbafffff] for
[bus ba]
[ 13.392043] PCI host bridge to bus 0000:ba
[ 13.396132] pci_bus 0000:ba: root bus resource [mem
0x40020c000000-0x40020c1fffff pref window]
[ 13.404731] pci_bus 0000:ba: root bus resource [bus ba]
[ 13.409950] pci 0000:ba:00.0: [19e5:a239] type 00 class 0x0c0310
[ 13.409958] pci 0000:ba:00.0: reg 0x10: [mem
0x40020c100000-0x40020c100fff 64bit pref]
[ 13.410026] pci 0000:ba:01.0: [19e5:a239] type 00 class 0x0c0320
[ 13.410034] pci 0000:ba:01.0: reg 0x10: [mem
0x40020c101000-0x40020c101fff 64bit pref]
[ 13.410102] pci 0000:ba:02.0: [19e5:a238] type 00 class 0x0c0330
[ 13.410109] pci 0000:ba:02.0: reg 0x10: [mem
0x40020c000000-0x40020c0fffff 64bit pref]
[ 13.410177] pci_bus 0000:ba: on NUMA node 2
[ 13.410181] pci 0000:ba:02.0: BAR 0: assigned [mem
0x40020c000000-0x40020c0fffff 64bit pref]
[ 13.418609] pci 0000:ba:00.0: BAR 0: assigned [mem
0x40020c100000-0x40020c100fff 64bit pref]
[ 13.427036] pci 0000:ba:01.0: BAR 0: assigned [mem
0x40020c101000-0x40020c101fff 64bit pref]
[ 13.435492] ACPI: PCI Root Bridge [PCI9] (domain 0000 [bus b8-b9])
[ 13.441662] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.448700] acpi PNP0A08:09: _OSC failed (AE_NOT_FOUND)
[ 13.454660] acpi PNP0A08:09: [Firmware Bug]: ECAM area [mem
0xdb800000-0xdb9fffff] not reserved in ACPI namespace
[ 13.464912] acpi PNP0A08:09: ECAM at [mem 0xdb800000-0xdb9fffff] for
[bus b8-b9]
[ 13.472358] PCI host bridge to bus 0000:b8
[ 13.476444] pci_bus 0000:b8: root bus resource [mem
0x400208000000-0x400208ffffff pref window]
[ 13.485043] pci_bus 0000:b8: root bus resource [bus b8-b9]
[ 13.490522] pci 0000:b8:00.0: [19e5:a258] type 00 class 0x100000
[ 13.490532] pci 0000:b8:00.0: reg 0x18: [mem 0x00000000-0x001fffff
64bit pref]
[ 13.490600] pci_bus 0000:b8: on NUMA node 2
[ 13.490603] pci 0000:b8:00.0: BAR 2: assigned [mem
0x400208000000-0x4002081fffff 64bit pref]
[ 13.499060] ACPI: PCI Root Bridge [PCIA] (domain 0000 [bus bc-bd])
[ 13.505232] acpi PNP0A08:0a: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.512271] acpi PNP0A08:0a: _OSC failed (AE_NOT_FOUND)
[ 13.518223] acpi PNP0A08:0a: [Firmware Bug]: ECAM area [mem
0xdbc00000-0xdbdfffff] not reserved in ACPI namespace
[ 13.528475] acpi PNP0A08:0a: ECAM at [mem 0xdbc00000-0xdbdfffff] for
[bus bc-bd]
[ 13.535919] PCI host bridge to bus 0000:bc
[ 13.540004] pci_bus 0000:bc: root bus resource [mem
0x400120000000-0x40013fffffff pref window]
[ 13.548603] pci_bus 0000:bc: root bus resource [bus bc-bd]
[ 13.554082] pci 0000:bc:00.0: [19e5:a121] type 01 class 0x060400
[ 13.554093] pci 0000:bc:00.0: enabling Extended Tags
[ 13.559138] pci 0000:bd:00.0: [19e5:a222] type 00 class 0x020000
[ 13.559146] pci 0000:bd:00.0: reg 0x10: [mem
0x400120210000-0x40012021ffff 64bit pref]
[ 13.559151] pci 0000:bd:00.0: reg 0x18: [mem
0x400120100000-0x4001201fffff 64bit pref]
[ 13.559181] pci 0000:bd:00.0: reg 0x224: [mem 0x00000000-0x0000ffff
64bit pref]
[ 13.559183] pci 0000:bd:00.0: VF(n) BAR0 space: [mem
0x00000000-0x000effff 64bit pref] (contains BAR0 for 15 VFs)
[ 13.569435] pci 0000:bd:00.0: reg 0x22c: [mem 0x00000000-0x000fffff
64bit pref]
[ 13.569437] pci 0000:bd:00.0: VF(n) BAR2 space: [mem
0x00000000-0x00efffff 64bit pref] (contains BAR2 for 15 VFs)
[ 13.579752] pci 0000:bd:00.1: [19e5:a222] type 00 class 0x020000
[ 13.579760] pci 0000:bd:00.1: reg 0x10: [mem
0x400120200000-0x40012020ffff 64bit pref]
[ 13.579764] pci 0000:bd:00.1: reg 0x18: [mem
0x400120000000-0x4001200fffff 64bit pref]
[ 13.579792] pci 0000:bd:00.1: reg 0x224: [mem 0x00000000-0x0000ffff
64bit pref]
[ 13.579794] pci 0000:bd:00.1: VF(n) BAR0 space: [mem
0x00000000-0x000effff 64bit pref] (contains BAR0 for 15 VFs)
[ 13.590045] pci 0000:bd:00.1: reg 0x22c: [mem 0x00000000-0x000fffff
64bit pref]
[ 13.590047] pci 0000:bd:00.1: VF(n) BAR2 space: [mem
0x00000000-0x00efffff 64bit pref] (contains BAR2 for 15 VFs)
[ 13.600381] pci_bus 0000:bc: on NUMA node 2
[ 13.600388] pci 0000:bc:00.0: BAR 15: assigned [mem
0x400120000000-0x4001221fffff 64bit pref]
[ 13.608905] pci 0000:bd:00.0: BAR 2: assigned [mem
0x400120000000-0x4001200fffff 64bit pref]
[ 13.617333] pci 0000:bd:00.0: BAR 9: assigned [mem
0x400120100000-0x400120ffffff 64bit pref]
[ 13.625758] pci 0000:bd:00.1: BAR 2: assigned [mem
0x400121000000-0x4001210fffff 64bit pref]
[ 13.634185] pci 0000:bd:00.1: BAR 9: assigned [mem
0x400121100000-0x400121ffffff 64bit pref]
[ 13.642611] pci 0000:bd:00.0: BAR 0: assigned [mem
0x400122000000-0x40012200ffff 64bit pref]
[ 13.651038] pci 0000:bd:00.0: BAR 7: assigned [mem
0x400122010000-0x4001220fffff 64bit pref]
[ 13.659463] pci 0000:bd:00.1: BAR 0: assigned [mem
0x400122100000-0x40012210ffff 64bit pref]
[ 13.667889] pci 0000:bd:00.1: BAR 7: assigned [mem
0x400122110000-0x4001221fffff 64bit pref]
[ 13.676314] pci 0000:bc:00.0: PCI bridge to [bus bd]
[ 13.681269] pci 0000:bc:00.0: bridge window [mem
0x400120000000-0x4001221fffff 64bit pref]
[ 13.689729] ACPI: PCI Root Bridge [PCIB] (domain 0000 [bus b4-b6])
[ 13.695899] acpi PNP0A08:0b: _OSC: OS supports [ExtendedConfig
Segments MSI]
[ 13.702937] acpi PNP0A08:0b: _OSC failed (AE_NOT_FOUND)
[ 13.708887] acpi PNP0A08:0b: [Firmware Bug]: ECAM area [mem
0xdb400000-0xdb6fffff] not reserved in ACPI namespace
[ 13.719147] acpi PNP0A08:0b: ECAM at [mem 0xdb400000-0xdb6fffff] for
[bus b4-b6]
[ 13.726612] PCI host bridge to bus 0000:b4
[ 13.730701] pci_bus 0000:b4: root bus resource [mem
0x400144000000-0x400147ffffff pref window]
[ 13.739300] pci_bus 0000:b4: root bus resource [mem
0xa3000000-0xa3ffffff window]
[ 13.746771] pci_bus 0000:b4: root bus resource [bus b4-b6]
[ 13.752249] pci 0000:b4:00.0: [19e5:a121] type 01 class 0x060400
[ 13.752260] pci 0000:b4:00.0: enabling Extended Tags
[ 13.757311] pci 0000:b5:00.0: [19e5:a250] type 00 class 0x120000
[ 13.757322] pci 0000:b5:00.0: reg 0x18: [mem
0x400144000000-0x4001443fffff 64bit pref]
[ 13.757352] pci 0000:b5:00.0: reg 0x22c: [mem 0x00000000-0x0000ffff
64bit pref]
[ 13.757354] pci 0000 pci 0000:b5:00.0: BAR 2: assigned [mem
0x400144000000-0x4001443fffff 64bit pref]
[ 13.784651] pci 0000:b5:00.0: BAR 9: assigned [mem
0x400144400000-0x4001447effff 64bit pref]
[ 13.793077] pci 0000:b4:00.0: PCI bridge to [bus b5]
[ 13.798030] pci 0000:b4:00.0: bridge window [mem
0x400144000000-0x4001447fffff 64bit pref]
[ 13.812531] pci 0000:05:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[ 13.820895] pci 0000:05:00.0: vgaarb: bridge control possible
[ 13.826630] pci 0000:05:00.0: vgaarb: setting as boot device (VGA
legacy resources not available)
[ 13.835489] vgaarb: loaded
[ 13.838330] SCSI subsystem initialized
[ 13.842278] libata version 3.00 loaded.
[ 13.842356] ACPI: bus type USB registered
[ 13.846389] usbcore: registered new interface driver usbfs
[ 13.851877] usbcore: registered new interface driver hub
[ 13.857466] usbcore: registered new device driver usb
[ 13.862817] pps_core: LinuxPPS API ver. 1 registered
[ 13.867772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 13.876897] PTP clock support registered
[ 13.880855] EDAC MC: Ver: 3.0.0
[ 13.884179] Registered efivars operations
[ 13.889792] Advanced Linux Sound Architecture Driver Initialized.
[ 13.896402] clocksource: Switched to clocksource arch_sys_counter
[ 13.902738] VFS: Disk quotas dquot_6.6.0
[ 13.906677] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 13.913640] pnp: PnP ACPI init
[ 13.917020] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[ 13.917114] pnp: PnP ACPI: found 1 devices
[ 13.923258] NET: Registered protocol family 2
[ 13.927990] tcp_listen_portaddr_hash hash table entries: 16384
(order: 6, 262144 bytes)
[ 13.936169] TCP established hash table entries: 262144 (order: 9,
2097152 bytes)
[ 13.944170] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.951082] TCP: Hash tables configured (established 262144 bind 65536)
[ 13.957871] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 13.964204] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 13.971084] NET: Registered protocol family 1
[ 13.975820] RPC: Registered named UNIX socket transport module.
[ 13.981732] RPC: Registered udp transport module.
[ 13.986424] RPC: Registered tcp transport module.
[ 13.991116] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.997582] pci 0000:7a:00.0: enabling device (0000 -> 0002)
[ 14.003250] pci 0000:7a:02.0: enabling device (0000 -> 0002)
[ 14.009044] pci 0000:ba:00.0: enabling device (0000 -> 0002)
[ 14.014709] pci 0000:ba:02.0: enabling device (0000 -> 0002)
[ 14.020422] PCI: CLS 32 bytes, default 64
[ 14.020466] Unpacking initramfs...
[ 16.964034] Freeing initrd memory: 261820K
[ 16.971264] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 13
counters available
[ 16.979454] kvm [1]: 16-bit VMID
[ 16.982673] kvm [1]: IPA Size Limit: 48bits
[ 16.986894] kvm [1]: GICv4 support disabled
[ 16.991072] kvm [1]: GICv3: no GICV resource entry
[ 16.995851] kvm [1]: disabling GICv2 emulation
[ 17.000298] kvm [1]: GIC system register CPU interface enabled
[ 17.006883] kvm [1]: vgic interrupt IRQ1
[ 17.011633] kvm [1]: VHE mode initialized successfully
[ 17.036115] Initialise system trusted keyrings
[ 17.040624] workingset: timestamp_bits=44 max_order=23 bucket_order=0
[ 17.049630] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 17.055851] NFS: Registering the id_resolver key type
[ 17.060899] Key type id_resolver registered
[ 17.065071] Key type id_legacy registered
[ 17.069071] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 17.075805] 9p: Installing v9fs 9p2000 file system support
[ 17.096132] Key type asymmetric registered
[ 17.100221] Asymmetric key parser 'x509' registered
[ 17.105100] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 245)
[ 17.112484] io scheduler mq-deadline registered
[ 17.117003] io scheduler kyber registered
[ 17.128253] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 17.136608] ACPI: Power Button [PWRB]
[ 17.141718] [Firmware Bug]: APEI: Invalid bit width + offset in GAR
[0x94110034/64/0/3/0]
[ 17.150049] EDAC MC0: Giving out device to module ghes_edac.c
controller ghes_edac: DEV ghes (INTERRUPT)
[ 17.159681] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[ 17.167106] EINJ: Error INJection is initialized.
[ 17.175031] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 17.201879] 00:00: ttyS0 at MMIO 0x3f00003f8 (irq = 6, base_baud =
115200) is a 16550A
[ 17.210578] SuperH (H)SCI(F) driver initialized
[ 17.215205] msm_serial: driver initialized
[ 17.219448] arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0
[ 17.225023] arm-smmu-v3 arm-smmu-v3.0.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.233402] arm-smmu-v3 arm-smmu-v3.1.auto: option mask 0x0
[ 17.238976] arm-smmu-v3 arm-smmu-v3.1.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.247335] arm-smmu-v3 arm-smmu-v3.2.auto: option mask 0x0
[ 17.252907] arm-smmu-v3 arm-smmu-v3.2.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.261224] arm-smmu-v3 arm-smmu-v3.3.auto: option mask 0x0
[ 17.266801] arm-smmu-v3 arm-smmu-v3.3.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.275124] arm-smmu-v3 arm-smmu-v3.4.auto: option mask 0x0
[ 17.280698] arm-smmu-v3 arm-smmu-v3.4.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.289020] arm-smmu-v3 arm-smmu-v3.5.auto: option mask 0x0
[ 17.294593] arm-smmu-v3 arm-smmu-v3.5.auto: ias 48-bit, oas 48-bit
(features 0x00000fef)
[ 17.320389] loop: module loaded
[ 17.324359] iommu: Adding device 0000:74:02.0 to group 0
[ 17.336788] scsi host0: hisi_sas_v3_hw
[ 18.626598] hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=11
[ 18.632684] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=11
[ 18.638768] hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=11
[ 18.644519] sas: phy-0:0 added to port-0:0, phy_mask:0x1
(500e004aaaaaaa1f)
[ 18.644851] hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=11
[ 18.644896] sas: DOING DISCOVERY on port 0, pid:2253
[ 18.650934] hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11
[ 18.650939] hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11
[ 18.650955] hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=11
[ 18.657295] hisi_sas_v3_hw 0000:74:02.0: dev[1:2] found
[ 18.663102] hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=11
[ 18.681004] sas: ex 500e004aaaaaaa1f phy00:U:0 attached:
0000000000000000 (no device)
[ 18.681109] sas: ex 500e004aaaaaaa1f phy01:U:0 attached:
0000000000000000 (no device)
[ 18.681202] sas: ex 500e004aaaaaaa1f phy02:U:0 attached:
0000000000000000 (no device)
[ 18.681293] sas: ex 500e004aaaaaaa1f phy03:U:0 attached:
0000000000000000 (no device)
[ 18.681385] sas: ex 500e004aaaaaaa1f phy04:U:0 attached:
0000000000000000 (no device)
[ 18.681478] sas: ex 500e004aaaaaaa1f phy05:U:0 attached:
0000000000000000 (no device)
[ 18.681570] sas: ex 500e004aaaaaaa1f phy06:U:0 attached:
0000000000000000 (no device)
[ 18.681666] sas: ex 500e004aaaaaaa1f phy07:U:0 attached:
0000000000000000 (no device)
[ 18.681780] sas: ex 500e004aaaaaaa1f phy08:U:8 attached:
500e004aaaaaaa08 (stp)
[ 18.681899] sas: ex 500e004aaaaaaa1f phy09:U:0 attached:
0000000000000000 (no device)
[ 18.681997] sas: ex 500e004aaaaaaa1f phy10:U:0 attached:
0000000000000000 (no device)
[ 18.682097] sas: ex 500e004aaaaaaa1f phy11:U:A attached:
5000c50085ff5559 (ssp)
[ 18.682189] sas: ex 500e004aaaaaaa1f phy12:U:0 attached:
0000000000000000 (no device)
[ 18.682284] sas: ex 500e004aaaaaaa1f phy13:U:0 attached:
0000000000000000 (no device)
[ 18.682375] sas: ex 500e004aaaaaaa1f phy14:U:0 attached:
0000000000000000 (no device)
[ 18.682468] sas: ex 500e004aaaaaaa1f phy15:U:0 attached:
0000000000000000 (no device)
[ 18.682564] sas: ex 500e004aaaaaaa1f phy16:U:B attached:
5001882016000000 (host)
[ 18.682661] sas: ex 500e004aaaaaaa1f phy17:U:B attached:
5001882016000000 (host)
[ 18.682757] sas: ex 500e004aaaaaaa1f phy18:U:B attached:
5001882016000000 (host)
[ 18.682874] sas: ex 500e004aaaaaaa1f phy19:U:B attached:
5001882016000000 (host)
[ 18.682981] sas: ex 500e004aaaaaaa1f phy20:U:B attached:
5001882016000000 (host)
[ 18.683092] sas: ex 500e004aaaaaaa1f phy21:U:B attached:
5001882016000000 (host)
[ 18.683211] sas: ex 500e004aaaaaaa1f phy22:U:B attached:
5001882016000000 (host)
[ 18.683338] sas: ex 500e004aaaaaaa1f phy23:U:B attached:
5001882016000000 (host)
[ 18.683458] sas: ex 500e004aaaaaaa1f phy24:D:B attached:
500e004aaaaaaa1e (host+target)
[ 18.683700] hisi_sas_v3_hw 0000:74:02.0: dev[2:5] found
[ 18.689407] hisi_sas_v3_hw 0000:74:02.0: dev[3:1] found
[ 18.694776] hisi_sas_v3_hw 0000:74:02.0: dev[4:1] found
[ 18.700155] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 18.706016] sas: ata1: end_device-0:0:8: dev error handler
[ 18.706026] sas: ata1: end_device-0:0:8: Unable to reset ata device?
[ 18.870074] ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
[ 18.876075] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32)
[ 18.888082] ata1.00: configured for UDMA/133
[ 18.892355] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
tries: 1
[ 18.902909] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320JI
0_01 PQ: 0 ANSI: 5
[ 18.911213] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 18.912094] scsi 0:0:1:0: Direct-Access SEAGATE ST1000NM0023
0006 PQ: 0 ANSI: 6
[ 18.918701] sd 0:0:0:0: [sda] Write Protect is off
[ 18.931552] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.931568] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 18.960176] scsi 0:0:2:0: Enclosure HUAWEI Expander 12Gx16
128 PQ: 0 ANSI: 6
[ 18.960442] sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 18.963152] sda: sda1 sda2 sda3
[ 18.964415] sd 0:0:0:0: [sda] Attached SCSI disk
[ 18.968985] sas: DONE DISCOVERY on port 0, pid:2253, result:0
[ 18.976277] sd 0:0:1:0: [sdb] Write Protect is off
[ 18.979135] sas: phy1 matched wide port0
[ 18.983735] sd 0:0:1:0: [sdb] Mode Sense: db 00 10 08
[ 18.988515] sas: phy-0:1 added to port-0:0, phy_mask:0x3
(500e004aaaaaaa1f)
[ 18.988529] sas: phy2 matched wide port0
[ 18.988532] sas: phy-0:2 added to port-0:0, phy_mask:0x7
(500e004aaaaaaa1f)
[ 18.988543] sas: phy3 matched wide port0
[ 18.988547] sas: phy-0:3 added to port-0:0, phy_mask:0xf
(500e004aaaaaaa1f)
[ 18.988558] sas: phy4 matched wide port0
[ 18.988561] sas: phy-0:4 added to port-0:0, phy_mask:0x1f
(500e004aaaaaaa1f)
[ 18.988572] sas: phy5 matched wide port0
[ 18.988575] sas: phy-0:5 added to port-0:0, phy_mask:0x3f
(500e004aaaaaaa1f)
[ 18.988585] sas: phy6 matched wide port0
[ 18.988589] sas: phy-0:6 added to port-0:0, phy_mask:0x7f
(500e004aaaaaaa1f)
[ 18.988600] sas: phy7 matched wide port0
[ 18.988606] sas: phy-0:7 added to port-0:0, phy_mask:0xff
(500e004aaaaaaa1f)
[ 18.989167] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 19.009377] sdb: sdb1 sdb2
[ 19.016366] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 19.560763] iommu: Adding device 0000:84:00.0 to group 1
[ 19.566966] nvme nvme0: pci function 0000:84:00.0
[ 19.571813] iommu: Adding device 0000:74:03.0 to group 2
[ 19.577861] ahci 0000:74:03.0: version 3.0
[ 19.577971] ahci 0000:74:03.0: SSS flag set, parallel bus scan disabled
[ 19.584587] ahci 0000:74:03.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps
0x3 impl SATA mode
[ 19.592667] ahci 0000:74:03.0: flags: 64bit ncq sntf stag pm led clo
only pmp fbs slum part ccc sxs boh
[ 19.602134] ahci 0000:74:03.0: both AHCI_HFLAG_MULTI_MSI flag set and
custom irq handler implemented
[ 19.611773] scsi host1: ahci
[ 19.614796] scsi host2: ahci
[ 19.617741] ata2: SATA max UDMA/133 abar m4096@0xa2008000 port
0xa2008100 irq 56
[ 19.625126] ata3: SATA max UDMA/133 abar m4096@0xa2008000 port
0xa2008180 irq 57
[ 19.633751] libphy: Fixed MDIO Bus: probed
[ 19.638008] tun: Universal TUN/TAP device driver, 1.6
[ 19.643379] thunder_xcv, ver 1.0
[ 19.646621] thunder_bgx, ver 1.0
[ 19.649856] nicpf, ver 1.0
[ 19.652794] hclge is initializing
[ 19.656095] hns3: Hisilicon Ethernet Network Driver for Hip08 Family
- version
[ 19.663306] hns3: Copyright (c) 2017 Huawei Corporation.
[ 19.668722] iommu: Adding device 0000:7d:00.0 to group 3
[ 19.674684] hns3 0000:7d:00.0: The firmware version is b0311019
[ 19.682894] nvme nvme0: 24/0/0 default/read/poll queues
[ 19.687810] hclge driver initialization finished.
[ 19.688158] WARNING: CPU: 50 PID: 256 at drivers/pci/msi.c:1269
pci_irq_get_affinity+0x3c/0x90
[ 19.701397] Modules linked in:
[ 19.704442] CPU: 50 PID: 256 Comm: kworker/u131:0 Not tainted
5.0.0-rc2-dirty #1027
[ 19.712084] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - B601 (V6.01) 11/08/2018
[ 19.719625] iommu: Adding device 0000:7d:00.1 to group 4
[ 19.720860] Workqueue: nvme-reset-wq nvme_reset_work
[ 19.720865] pstate: 60c00009 (nZCv daif +PAN +UAO)
[ 19.726921] hns3 0000:7d:00.1: The firmware version is b0311019
[ 19.731116] pc : pci_irq_get_affinity+0x3c/0x90
[ 19.731121] lr : blk_mq_pci_map_queues+0x44/0xf0
[ 19.731122] sp : ffff000012c33b90
[ 19.731126] x29: ffff000012c33b90 x28: 0000000000000000
[ 19.742816] hclge driver initialization finished.
[ 19.746325] x27: 0000000000000000 x26: ffff000010f2ccf8
[ 19.746330] x25: ffff8a23d9de0008 x24: ffff0000111fd000
[ 19.774813] x23: ffff8a23e9232000 x22: 0000000000000001
[ 19.777535] iommu: Adding device 0000:7d:00.2 to group 5
[ 19.780113] x21: ffff0000111fda84 x20: ffff8a23d9ee9280
[ 19.786089] hns3 0000:7d:00.2: The firmware version is b0311019
[ 19.790713] x19: 0000000000000017 x18: ffffffffffffffff
[ 19.790716] x17: 0000000000000001 x16: 0000000000000019
[ 19.790717] x15: ffff0000111fd6c8 x14: ffff000092c33907
[ 19.790721] x13: ffff000012c33915 x12: ffff000011215000
[ 19.799746] libphy: hisilicon MII bus: probed
[ 19.801926] x11: 0000000005f5e0ff x10: ffff7e288f66bc80
[ 19.801929] x9 : 0000000000000000 x8 : ffff8a23d9af2100
[ 19.807804] hclge driver initialization finished.
[ 19.812530] x7 : 0000000000000000 x6 : 000000000000003f
[ 19.812533] x5 : 0000000000000040 x4 : 3000000000000000
[ 19.824568] iommu: Adding device 0000:7d:00.3 to group 6
[ 19.827474] x3 : 0000000000000018 x2 : ffff8a23e92322c0
[ 19.833530] hns3 0000:7d:00.3: The firmware version is b0311019
[ 19.837466] x1 : 0000000000000018 x0 : ffff8a23e92322c0
[ 19.837469] Call trace:
[ 19.837472] pci_irq_get_affinity+0x3c/0x90
[ 19.837476] nvme_pci_map_queues+0x90/0xe0
[ 19.844558] libphy: hisilicon MII bus: probed
[ 19.848074] blk_mq_update_queue_map+0xbc/0xd8
[ 19.848078] blk_mq_alloc_tag_set+0x1d8/0x338
[ 19.853769] hclge driver initialization finished.
[ 19.858675] nvme_reset_work+0x1030/0x13f0
[ 19.858682] process_one_work+0x1e0/0x318
[ 19.858687] worker_thread+0x228/0x450
[ 19.871312] iommu: Adding device 0000:bd:00.0 to group 7
[ 19.872323] kthread+0x128/0x130
[ 19.872328] ret_from_fork+0x10/0x18
[ 19.877506] hns3 0000:bd:00.0: The firmware version is b0311019
[ 19.880581] ---[ end trace e3dfe0887464a27e ]---
[ 19.880598] WARNING: CPU: 50 PID: 256 at block/blk-mq-pci.c:52
blk_mq_pci_map_queues+0xe4/0xf0
[ 19.894010] hclge driver initialization finished.
[ 19.898391] Modules linked in:
[ 19.898394] CPU: 50 PID: 256 Comm: kworker/u131:0 Tainted: G W
5.0.0-rc2-dirty #1027
[ 19.898395] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - B601 (V6.01) 11/08/2018
[ 19.898397] Workqueue: nvme-reset-wq nvme_reset_work
[ 19.930001] iommu: Adding device 0000:bd:00.1 to group 8
[ 19.932786] pstate: 20c00009 (nzCv daif +PAN +UAO)
[ 19.932789] pc : blk_mq_pci_map_queues+0xe4/0xf0
[ 19.932791] lr : blk_mq_pci_map_queues+0x44/0xf0
[ 19.932795] sp : ffff000012c33b90
[ 19.942319] hns3 0000:bd:00.1: The firmware version is b0311019
[ 19.946081] x29: ffff000012c33b90 x28: 0000000000000000
[ 19.946083] x27: 0000000000000000 x26: ffff000010f2ccf8
[ 19.946085] x25: ffff8a23d9de0008 x24: ffff0000111fd000
[ 19.946086] x23: ffff8a23e9232000 x22: 0000000000000001
[ 19.950466] ata2: SATA link down (SStatus 0 SControl 300)
[ 19.958160] x21: ffff0000111fda84 x20: 0000000000000000
[ 19.958165] x19: 0000000000000017 x18: ffffffffffffffff
[ 19.958356] hclge driver initialization finished.
[ 19.986330] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 19.986561] x17: 0000000000000001 x16: 0000000000000019
[ 19.991170] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 19.994470] x15: ffff0000111fd6c8 x14: ffff000092c33907
[ 19.994474] x13: ffff000012c33915 x12: ffff000011215000
[ 20.000426] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.4.0-k
[ 20.005681] x11: 0000000005f5e4 : 3000000000000000
[ 20.021609] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
version 2.4.0-k
[ 20.026969] x3 : 0000000000000018 x2 : ffff8a23e92322c0
[ 20.026974] x1 : 0000000000000018 x0 : 0000000000000018
[ 20.032274] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 20.037571] Call trace:
[ 20.037574] blk_mq_pci_map_queues+0xe4/0xf0
[ 20.037577] nvme_pci_map_queues+0x90/0xe0
[ 20.042524] sky2: driver version 1.30
[ 20.048087] blk_mq_update_queue_map+0xbc/0xd8
[ 20.048090] blk_mq_alloc_tag_set+0x1d8/0x338
[ 20.048094] nvme_reset_work+0x1030/0x13f0
[ 20.053748] VFIO - User Level meta-driver version: 0.3
[ 20.059299] process_one_work+0x1e0/0x318
[ 20.059301] worker_thread+0x228/0x450
[ 20.059303] kthread+0x128/0x130
[ 20.059307] ret_from_fork+0x10/0x18
[ 20.065116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.069903] ---[ end trace e3dfe0887464a27f ]---
[ 20.074137] nvme0n1: p1 p2 p3
[ 20.076863] ehci-pci: EHCI PCI platform driver
[ 20.077006] ehci-pci 0000:7a:01.0: EHCI Host Controller
[ 20.198686] ehci-pci 0000:7a:01.0: new USB bus registered, assigned
bus number 1
[ 20.206174] ehci-pci 0000:7a:01.0: irq 54, io mem 0x20c101000
[ 20.224361] ehci-pci 0000:7a:01.0: USB 0.0 started, EHCI 1.00
[ 20.230276] hub 1-0:1.0: USB hub found
[ 20.234023] hub 1-0:1.0: 2 ports detected
[ 20.238324] ehci-pci 0000:ba:01.0: EHCI Host Controller
[ 20.243571] ehci-pci 0000:ba:01.0: new USB bus registered, assigned
bus number 2
[ 20.251111] ehci-pci 0000:ba:01.0: irq 54, io mem 0x40020c101000
[ 20.272362] ehci-pci 0000:ba:01.0: USB 0.0 started, EHCI 1.00
[ 20.278336] hub 2-0:1.0: USB hub found
[ 20.282085] hub 2-0:1.0: 2 ports detected
[ 20.286253] ehci-platform: EHCI generic platform driver
[ 20.291576] ehci-orion: EHCI orion driver
[ 20.295625] ehci-exynos: EHCI EXYNOS driver
[ 20.299837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.306015] ohci-pci: OHCI PCI platform driver
[ 20.310524] ohci-pci 0000:7a:00.0: OHCI PCI host controller
[ 20.316096] ohci-pci 0000:7a:00.0: new USB bus registered, assigned
bus number 3
[ 20.323545] ohci-pci 0000:7a:00.0: irq 54, io mem 0x20c100000
[ 20.392594] hub 3-0:1.0: USB hub found
[ 20.396336] hub 3-0:1.0: 2 ports detected
[ 20.398475] ata3: SATA link down (SStatus 0 SControl 300)
[ 20.400609] ohci-pci 0000:ba:00.0: OHCI PCI host controller
[ 20.411301] ohci-pci 0000:ba:00.0: new USB bus registered, assigned
bus number 4
[ 20.418774] ohci-pci 0000:ba:00.0: irq 54, io mem 0x40020c100000
[ 20.488585] hub 4-0:1.0: USB hub found
[ 20.492328] hub 4-0:1.0: 2 ports detected
[ 20.496535] ohci-platform: OHCI generic platform driver
[ 20.501802] ohci-exynos: OHCI EXYNOS driver
[ 20.506093] xhci_hcd 0000:7a:02.0: xHCI Host Controller
[ 20.511315] xhci_hcd 0000:7a:02.0: new USB bus registered, assigned
bus number 5
[ 20.518870] xhci_hcd 0000:7a:02.0: hcc params 0x0220f66d hci version
0x100 quirks 0x0000000000000010
[ 20.528283] hub 5-0:1.0: USB hub found
[ 20.532032] hub 5-0:1.0: 1 port detected
[ 20.536073] xhci_hcd 0000:7a:02.0: xHCI Host Controller
[ 20.541294] xhci_hcd 0000:7a:02.0: new USB bus registered, assigned
bus number 6
[ 20.548681] xhci_hcd 0000:7a:02.0: Host supports USB 3.0 SuperSpeed
[ 20.555038] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 20.563255] hub 6-0:1.0: USB hub found
[ 20.567000] hub 6-0:1.0: 1 port detected
[ 20.571098] xhci_hcd 0000:ba:02.0: xHCI Host Controller
[ 20.572359] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 20.576339] xhci_hcd 0000:ba:02.0: new USB bus registered, assigned
bus number 7
[ 20.590474] xhci_hcd 0000:ba:02.0: hcc params 0x0220f66d hci version
0x100 quirks 0x0000000000000010
[ 20.599958] hub 7-0:1.0: USB hub found
[ 20.603714] hub 7-0:1.0: 1 port detected
[ 20.607780] xhci_hcd 0000:ba:02.0: xHCI Host Controller
[ 20.613004] xhci_hcd 0000:ba:02.0: new USB bus registered, assigned
bus number 8
[ 20.620391] xhci_hcd 0000:ba:02.0: Host supports USB 3.0 SuperSpeed
[ 20.626747] usb usb8: We don't know the algorithms for LPM for th]
usbcore: registered new interface driver usb-storage
[ 20.690169] rtc-efi rtc-efi: registered as rtc0
[ 20.694948] i2c /dev entries driver
[ 20.699861] sdhci: Secure Digital Host Controller Interface driver
[ 20.706032] sdhci: Copyright(c) Pierre Ossman
[ 20.710605] Synopsys Designware Multimedia Card Interface Driver
[ 20.716878] sdhci-pltfm: SDHCI platform and OF driver helper
[ 20.723949] ledtrig-cpu: registered to indicate activity on CPUs
[ 20.730567] usbcore: registered new interface driver usbhid
[ 20.736132] usbhid: USB HID core driver
[ 20.736964] hub 1-1:1.0: USB hub found
[ 20.743799] hub 1-1:1.0: 4 ports detected
[ 20.788328] NET: Registered protocol family 17
[ 20.792835] 9pnet: Installing 9P2000 support
[ 20.797115] Key type dns_resolver registered
[ 20.801565] registered taskstats version 1
[ 20.805653] Loading compiled-in X.509 certificates
[ 20.810898] iommu: Adding device 0000:00:00.0 to group 9
[ 20.816944] iommu: Adding device 0000:00:04.0 to group 10
[ 20.822917] iommu: Adding device 0000:00:08.0 to group 11
[ 20.828870] iommu: Adding device 0000:00:0c.0 to group 12
[ 20.834827] iommu: Adding device 0000:00:10.0 to group 13
[ 20.840801] iommu: Adding device 0000:00:12.0 to group 14
[ 20.846795] iommu: Adding device 0000:7c:00.0 to group 15
[ 20.852716] iommu: Adding device 0000:74:00.0 to group 16
[ 20.858662] iommu: Adding device 0000:80:00.0 to group 17
[ 20.864697] iommu: Adding device 0000:80:08.0 to group 18
[ 20.870681] iommu: Adding device 0000:80:0c.0 to group 19
[ 20.876357] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 20.876672] iommu: Adding device 0000:80:10.0 to group 20
[ 20.888892] iommu: Adding device 0000:bc:00.0 to group 21
[ 20.894847] iommu: Adding device 0000:b4:00.0 to group 22
[ 20.920938] rtc-efi rtc-efi: setting system clock to
2019-01-14T12:57:29 UTC (1547470649)
[ 20.929132] ALSA device list:
[ 20.932087] No soundcards found.
[ 20.935881] Freeing unused kernel memory: 1408K
[ 20.960386] Run /init as init process
[ 21.036960] hub 1-2:1.0: USB hub found
[ 21.040799] hub 1-2:1.0: 4 ports detected
[ 21.332354] usb 1-2.1: new full-speed USB device number 4 using ehci-pci
[ 26.570925] random: fast init done
[ 26.576673] input: Keyboard/Mouse KVM 1.1.0 as
/devices/pci0000:7a/0000:7a:01.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:12D1:0003.0001/input/input1
[ 26.648522] hid-generic 0003:12D1:0003.0001: input: USB HID v1.10
Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-0000:7a:01.0-2.1/input0
[ 26.661611] input: Keyboard/Mouse KVM 1.1.0 as
/devices/pci0000:7a/0000:7a:01.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:12D1:0003.0002/input/input2
[ 26.673985] hid-generic 0003:12D1:0003.0002: input: USB HID v1.10
Mouse [Keyboard/Mouse KVM 1.1.0] on usb-0000:7a:01.0-2.1/input1
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-01-14 13:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-29 3:26 [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs Ming Lei
2018-12-29 3:26 ` [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity Ming Lei
2018-12-31 22:00 ` Bjorn Helgaas
2018-12-31 22:41 ` Keith Busch
2019-01-01 5:24 ` Ming Lei
2019-01-02 21:02 ` Bjorn Helgaas
2019-01-02 22:46 ` Keith Busch
2019-01-14 13:13 ` [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs John Garry
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).