linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Chris Healy <cphealy@gmail.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	"A.s. Dong" <aisheng.dong@nxp.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH v4 3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
Date: Fri,  4 Jan 2019 08:53:34 -0800	[thread overview]
Message-ID: <20190104165335.13205-4-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190104165335.13205-1-andrew.smirnov@gmail.com>

Both i.MX7D and i.MX8MQ have the same behaviour when it comes to
clearing DIRECT_SPEED_CHANGE bit when no speed change occur. To
account for that change the code handling that to use a generic flag
instead of checking IP block variant.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index c55d93c1187d..75ee0cd7af3b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -42,6 +42,7 @@ enum imx6_pcie_variants {
 };
 
 #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
+#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
 
 struct imx6_pcie_drvdata {
 	enum imx6_pcie_variants variant;
@@ -711,7 +712,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 		tmp |= PORT_LOGIC_SPEED_CHANGE;
 		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
 
-		if (imx6_pcie->drvdata->variant != IMX7D) {
+		if (imx6_pcie->drvdata->flags &
+		    IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
 			/*
 			 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
 			 * from i.MX6 family when no link speed transition
@@ -1097,15 +1099,18 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 static const struct imx6_pcie_drvdata drvdata[] = {
 	[IMX6Q] = {
 		.variant = IMX6Q,
-		.flags = IMX6_PCIE_FLAG_IMX6_PHY,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
 	},
 	[IMX6SX] = {
 		.variant = IMX6SX,
-		.flags = IMX6_PCIE_FLAG_IMX6_PHY,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
 	},
 	[IMX6QP] = {
 		.variant = IMX6QP,
-		.flags = IMX6_PCIE_FLAG_IMX6_PHY,
+		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
 	},
 	[IMX7D] = {
 		.variant = IMX7D,
-- 
2.20.1


  parent reply	other threads:[~2019-01-04 16:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-04 16:53 [PATCH v4 0/4] PCIE support for i.MX8MQ Andrey Smirnov
2019-01-04 16:53 ` [PATCH v4 1/4] PCI: imx6: introduce drvdata Andrey Smirnov
2019-01-04 16:53 ` [PATCH v4 2/4] PCI: imx6: Mark PHY functions as i.MX6 specific Andrey Smirnov
2019-01-04 16:53 ` Andrey Smirnov [this message]
2019-01-08  8:21   ` [PATCH v4 3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag Lucas Stach
2019-01-04 16:53 ` [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ Andrey Smirnov
2019-01-08  8:23   ` Lucas Stach
2019-01-11 19:53   ` Rob Herring
2019-01-12 21:28     ` Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190104165335.13205-4-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=aisheng.dong@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=cphealy@gmail.com \
    --cc=fabio.estevam@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=l.stach@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).