linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>
Cc: <linux@yadro.com>, Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH RFC v2 16/21] PCI: Enable bridge's I/O and MEM access for hotplugged devices
Date: Fri, 11 Jan 2019 18:37:02 +0300	[thread overview]
Message-ID: <20190111153707.10140-17-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190111153707.10140-1-s.miroshnichenko@yadro.com>

After updating the bridge window resources, the PCI_COMMAND_IO and
PCI_COMMAND_MEMORY bits of the bridge must be addressed as well.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a5266f31b612..633aa2570008 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1602,6 +1602,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
 		pci_enable_bridge(bridge);
 
 	if (pci_is_enabled(dev)) {
+		int i, bars = 0;
+
+		for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) {
+			if (dev->resource[i].flags & (IORESOURCE_MEM | IORESOURCE_IO))
+				bars |= (1 << i);
+		}
+		do_pci_enable_device(dev, bars);
+
 		if (!dev->is_busmaster)
 			pci_set_master(dev);
 		mutex_unlock(&dev->enable_mutex);
-- 
2.20.1


  parent reply	other threads:[~2019-01-11 15:43 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 15:36 [PATCH RFC v2 00/21] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 01/21] PCI: Fix writing invalid BARs during pci_restore_state() Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 02/21] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 03/21] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 04/21] PCI: Pause the devices with movable BARs during rescan Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 05/21] PCI: Release and reassign the root bridge resources " Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 06/21] PCI: Don't allow hotplugged devices to steal resources Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 07/21] PCI: Mark immovable BARs with PCI_FIXED Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 08/21] PCI: Include fixed BARs into the bus size calculating Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 09/21] PCI: Don't reserve memory for hotplug when enabled movable BARs Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 10/21] PCI: Allow the failed resources to be reassigned later Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 11/21] PCI: Calculate fixed areas of bridge windows based on fixed BARs Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 12/21] PCI: Calculate boundaries for bridge windows Sergey Miroshnichenko
2019-01-11 15:36 ` [PATCH RFC v2 13/21] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 14/21] PCI: Prioritize fixed BAR assigning over the movable ones Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 15/21] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-01-11 15:37 ` Sergey Miroshnichenko [this message]
2019-01-11 15:37 ` [PATCH RFC v2 17/21] PCI: pciehp: Add support for the movable BARs feature Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 18/21] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 19/21] powerpc/pci: Fix crash with enabled " Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 20/21] PCI: Wake up bridges during rescan when movable BARs enabled Sergey Miroshnichenko
2019-01-11 15:37 ` [PATCH RFC v2 21/21] x86: enable movable BARs Sergey Miroshnichenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190111153707.10140-17-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).