Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
@ 2019-01-22  6:33 Xiaowei Bao
  2019-01-22  6:33 ` [PATCHv6 2/4] arm64: dts: Add the PCIE EP node in dts Xiaowei Bao
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Xiaowei Bao @ 2019-01-22  6:33 UTC (permalink / raw)
  To: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	lorenzo.pieralisi, arnd, gregkh, minghuan.Lian, mingkai.hu,
	roy.zang, kstewart, cyrille.pitchen, pombredanne, shawn.lin,
	linux-pci, devicetree, linux-kernel, linux-arm-kernel,
	linuxppc-dev
  Cc: Xiaowei Bao

Add the documentation for the Device Tree binding for the layerscape PCIe
controller with EP mode.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
---
v2:
 - Add the SoC specific compatibles.
v3:
 - modify the commit message.
v4:
 - no change.
v5:
 - no change.
v6:
 - no change.

 .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 9b2b8d6..e20ceaa 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,6 +13,7 @@ information.
 
 Required properties:
 - compatible: should contain the platform identifier such as:
+  RC mode:
         "fsl,ls1021a-pcie"
         "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
         "fsl,ls2088a-pcie"
@@ -20,6 +21,8 @@ Required properties:
         "fsl,ls1046a-pcie"
         "fsl,ls1043a-pcie"
         "fsl,ls1012a-pcie"
+  EP mode:
+	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- 
1.7.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv6 2/4] arm64: dts: Add the PCIE EP node in dts
  2019-01-22  6:33 [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Xiaowei Bao
@ 2019-01-22  6:33 ` Xiaowei Bao
  2019-01-22  6:33 ` [PATCHv6 3/4] pci: layerscape: Add the EP mode support Xiaowei Bao
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 10+ messages in thread
From: Xiaowei Bao @ 2019-01-22  6:33 UTC (permalink / raw)
  To: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	lorenzo.pieralisi, arnd, gregkh, minghuan.Lian, mingkai.hu,
	roy.zang, kstewart, cyrille.pitchen, pombredanne, shawn.lin,
	linux-pci, devicetree, linux-kernel, linux-arm-kernel,
	linuxppc-dev
  Cc: Xiaowei Bao

Add the PCIE EP node in dts for ls1046a.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
---
v2:
 - Add the SoC specific compatibles. 
v3:
 - no change
v4:
 - no change
v5:
 - change the OB win number due to the RM update.
v6:
 - no change

 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   34 +++++++++++++++++++++++-
 1 files changed, 33 insertions(+), 1 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0e762ca..cb71850 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -666,6 +666,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3400000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+				0x40 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie@3500000 {
 			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
@@ -693,6 +704,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3500000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+				0x48 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie@3600000 {
 			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
@@ -720,6 +742,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3600000 {
+			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000
+				0x50 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		qdma: dma-controller@8380000 {
 			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
 			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
@@ -740,7 +773,6 @@
 			queue-sizes = <64 64>;
 			big-endian;
 		};
-
 	};
 
 	reserved-memory {
-- 
1.7.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
  2019-01-22  6:33 [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Xiaowei Bao
  2019-01-22  6:33 ` [PATCHv6 2/4] arm64: dts: Add the PCIE EP node in dts Xiaowei Bao
@ 2019-01-22  6:33 ` Xiaowei Bao
  2019-02-19 11:27   ` Lorenzo Pieralisi
  2019-01-22  6:33 ` [PATCHv6 4/4] misc: pci_endpoint_test: Add the layerscape EP device support Xiaowei Bao
  2019-02-05 18:02 ` [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Lorenzo Pieralisi
  3 siblings, 1 reply; 10+ messages in thread
From: Xiaowei Bao @ 2019-01-22  6:33 UTC (permalink / raw)
  To: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	lorenzo.pieralisi, arnd, gregkh, minghuan.Lian, mingkai.hu,
	roy.zang, kstewart, cyrille.pitchen, pombredanne, shawn.lin,
	linux-pci, devicetree, linux-kernel, linux-arm-kernel,
	linuxppc-dev
  Cc: Xiaowei Bao

Add the PCIe EP mode support for layerscape platform.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
---
depends on: https://patchwork.kernel.org/project/linux-pci/list/?series=66177

v2:
 - remove the EP mode check function.
v3:
 - modif the return value when enter default case.
v4:
 - no change.
v5:
 - no change.
v6:
 - modify the code base on the submit patch of the EP framework.

 drivers/pci/controller/dwc/Makefile            |    2 +-
 drivers/pci/controller/dwc/pci-layerscape-ep.c |  157 ++++++++++++++++++++++++
 2 files changed, 158 insertions(+), 1 deletions(-)
 create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c

diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 7bcdcdf..b5f3b83 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
new file mode 100644
index 0000000..ddc2dbb
--- /dev/null
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe controller EP driver for Freescale Layerscape SoCs
+ *
+ * Copyright (C) 2018 NXP Semiconductor.
+ *
+ * Author: Xiaowei Bao <xiaowei.bao@nxp.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+
+#include "pcie-designware.h"
+
+#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
+
+struct ls_pcie_ep {
+	struct dw_pcie		*pci;
+};
+
+#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
+
+static int ls_pcie_establish_link(struct dw_pcie *pci)
+{
+	return 0;
+}
+
+static const struct dw_pcie_ops ls_pcie_ep_ops = {
+	.start_link = ls_pcie_establish_link,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+	{ .compatible = "fsl,ls-pcie-ep",},
+	{ },
+};
+
+static const struct pci_epc_features ls_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+};
+
+static const struct pci_epc_features*
+ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
+{
+	return &ls_pcie_epc_features;
+}
+
+static void ls_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct pci_epc *epc = ep->epc;
+	enum pci_barno bar;
+
+	for (bar = BAR_0; bar <= BAR_5; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				  enum pci_epc_irq_type type, u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
+	case PCI_EPC_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	case PCI_EPC_IRQ_MSIX:
+		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+		return -EINVAL;
+	}
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+	.ep_init = ls_pcie_ep_init,
+	.raise_irq = ls_pcie_ep_raise_irq,
+	.get_features = ls_pcie_ep_get_features,
+};
+
+static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
+					struct platform_device *pdev)
+{
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep;
+	struct resource *res;
+	int ret;
+
+	ep = &pci->ep;
+	ep->ops = &pcie_ep_ops;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+	if (!res)
+		return -EINVAL;
+
+	ep->phys_base = res->start;
+	ep->addr_size = resource_size(res);
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize endpoint\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __init ls_pcie_ep_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct ls_pcie_ep *pcie;
+	struct resource *dbi_base;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+	if (!pci)
+		return -ENOMEM;
+
+	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+	if (IS_ERR(pci->dbi_base))
+		return PTR_ERR(pci->dbi_base);
+
+	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+	pci->dev = dev;
+	pci->ops = &ls_pcie_ep_ops;
+	pcie->pci = pci;
+
+	platform_set_drvdata(pdev, pcie);
+
+	ret = ls_add_pcie_ep(pcie, pdev);
+
+	return ret;
+}
+
+static struct platform_driver ls_pcie_ep_driver = {
+	.driver = {
+		.name = "layerscape-pcie-ep",
+		.of_match_table = ls_pcie_ep_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
-- 
1.7.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv6 4/4] misc: pci_endpoint_test: Add the layerscape EP device support
  2019-01-22  6:33 [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Xiaowei Bao
  2019-01-22  6:33 ` [PATCHv6 2/4] arm64: dts: Add the PCIE EP node in dts Xiaowei Bao
  2019-01-22  6:33 ` [PATCHv6 3/4] pci: layerscape: Add the EP mode support Xiaowei Bao
@ 2019-01-22  6:33 ` Xiaowei Bao
  2019-02-05 18:02 ` [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Lorenzo Pieralisi
  3 siblings, 0 replies; 10+ messages in thread
From: Xiaowei Bao @ 2019-01-22  6:33 UTC (permalink / raw)
  To: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	lorenzo.pieralisi, arnd, gregkh, minghuan.Lian, mingkai.hu,
	roy.zang, kstewart, cyrille.pitchen, pombredanne, shawn.lin,
	linux-pci, devicetree, linux-kernel, linux-arm-kernel,
	linuxppc-dev
  Cc: Xiaowei Bao

Add the layerscape EP device support in pci_endpoint_test driver.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
Reviewed-by: Greg KH <gregkh@linuxfoundation.org>
---
v2:
 - no change
v3:
 - no change
v4:
 - delate the comments.
v5:
 - no change.
v6:
 - no change.

 drivers/misc/pci_endpoint_test.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 896e2df..29582fe 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -788,6 +788,7 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
 static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, 0xedda) },
 	{ }
 };
-- 
1.7.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
  2019-01-22  6:33 [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Xiaowei Bao
                   ` (2 preceding siblings ...)
  2019-01-22  6:33 ` [PATCHv6 4/4] misc: pci_endpoint_test: Add the layerscape EP device support Xiaowei Bao
@ 2019-02-05 18:02 ` Lorenzo Pieralisi
  2019-02-19  6:57   ` Xiaowei Bao
  3 siblings, 1 reply; 10+ messages in thread
From: Lorenzo Pieralisi @ 2019-02-05 18:02 UTC (permalink / raw)
  To: Xiaowei Bao
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	arnd, gregkh, minghuan.Lian, mingkai.hu, roy.zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev

On Tue, Jan 22, 2019 at 02:33:25PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape PCIe
> controller with EP mode.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> Reviewed-by: Rob Herring <robh+dt@kernel.org>
> ---
> v2:
>  - Add the SoC specific compatibles.
> v3:
>  - modify the commit message.
> v4:
>  - no change.
> v5:
>  - no change.
> v6:
>  - no change.
> 
>  .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)

Applied the series to pci/layerscape for v5.1, thanks.

Lorenzo

> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>  
>  Required properties:
>  - compatible: should contain the platform identifier such as:
> +  RC mode:
>          "fsl,ls1021a-pcie"
>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
>          "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
>          "fsl,ls1046a-pcie"
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
> +  EP mode:
> +	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> -- 
> 1.7.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
  2019-02-05 18:02 ` [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Lorenzo Pieralisi
@ 2019-02-19  6:57   ` Xiaowei Bao
  0 siblings, 0 replies; 10+ messages in thread
From: Xiaowei Bao @ 2019-02-19  6:57 UTC (permalink / raw)
  To: Lorenzo Pieralisi
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, Leo Li, kishon, arnd,
	gregkh, M.h. Lian, Mingkai Hu, Roy Zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev



-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Sent: 2019Äê2ÔÂ6ÈÕ 2:03
To: Xiaowei Bao <xiaowei.bao@nxp.com>
Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode

On Tue, Jan 22, 2019 at 02:33:25PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape 
> PCIe controller with EP mode.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> Reviewed-by: Rob Herring <robh+dt@kernel.org>
> ---
> v2:
>  - Add the SoC specific compatibles.
> v3:
>  - modify the commit message.
> v4:
>  - no change.
> v5:
>  - no change.
> v6:
>  - no change.
> 
>  .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)

Applied the series to pci/layerscape for v5.1, thanks.
[Xiaowei Bao] Hi Lorenzo, thank a lot.

Lorenzo
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt 
> b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>  
>  Required properties:
>  - compatible: should contain the platform identifier such as:
> +  RC mode:
>          "fsl,ls1021a-pcie"
>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
>          "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
>          "fsl,ls1046a-pcie"
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
> +  EP mode:
> +	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> --
> 1.7.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
  2019-01-22  6:33 ` [PATCHv6 3/4] pci: layerscape: Add the EP mode support Xiaowei Bao
@ 2019-02-19 11:27   ` Lorenzo Pieralisi
  2019-02-20  3:09     ` Xiaowei Bao
  0 siblings, 1 reply; 10+ messages in thread
From: Lorenzo Pieralisi @ 2019-02-19 11:27 UTC (permalink / raw)
  To: Xiaowei Bao
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, leoyang.li, kishon,
	arnd, gregkh, minghuan.Lian, mingkai.hu, roy.zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev

On Tue, Jan 22, 2019 at 02:33:27PM +0800, Xiaowei Bao wrote:
> Add the PCIe EP mode support for layerscape platform.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> depends on: https://patchwork.kernel.org/project/linux-pci/list/?series=66177
> 
> v2:
>  - remove the EP mode check function.
> v3:
>  - modif the return value when enter default case.
> v4:
>  - no change.
> v5:
>  - no change.
> v6:
>  - modify the code base on the submit patch of the EP framework.

Can I apply this series to my pci/endpoint branch (where I queued
Kishon's EP features rework patches) ? Can you check please ?

Thanks,
Lorenzo

>  drivers/pci/controller/dwc/Makefile            |    2 +-
>  drivers/pci/controller/dwc/pci-layerscape-ep.c |  157 ++++++++++++++++++++++++
>  2 files changed, 158 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
> 
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 7bcdcdf..b5f3b83 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> new file mode 100644
> index 0000000..ddc2dbb
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe controller EP driver for Freescale Layerscape SoCs
> + *
> + * Copyright (C) 2018 NXP Semiconductor.
> + *
> + * Author: Xiaowei Bao <xiaowei.bao@nxp.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> +
> +struct ls_pcie_ep {
> +	struct dw_pcie		*pci;
> +};
> +
> +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> +
> +static int ls_pcie_establish_link(struct dw_pcie *pci)
> +{
> +	return 0;
> +}
> +
> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> +	.start_link = ls_pcie_establish_link,
> +};
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> +	{ .compatible = "fsl,ls-pcie-ep",},
> +	{ },
> +};
> +
> +static const struct pci_epc_features ls_pcie_epc_features = {
> +	.linkup_notifier = false,
> +	.msi_capable = true,
> +	.msix_capable = false,
> +};
> +
> +static const struct pci_epc_features*
> +ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
> +{
> +	return &ls_pcie_epc_features;
> +}
> +
> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	struct pci_epc *epc = ep->epc;
> +	enum pci_barno bar;
> +
> +	for (bar = BAR_0; bar <= BAR_5; bar++)
> +		dw_pcie_ep_reset_bar(pci, bar);
> +}
> +
> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> +				  enum pci_epc_irq_type type, u16 interrupt_num)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	switch (type) {
> +	case PCI_EPC_IRQ_LEGACY:
> +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> +	case PCI_EPC_IRQ_MSI:
> +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> +	case PCI_EPC_IRQ_MSIX:
> +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> +	default:
> +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
> +		return -EINVAL;
> +	}
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> +	.ep_init = ls_pcie_ep_init,
> +	.raise_irq = ls_pcie_ep_raise_irq,
> +	.get_features = ls_pcie_ep_get_features,
> +};
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> +					struct platform_device *pdev)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	struct dw_pcie_ep *ep;
> +	struct resource *res;
> +	int ret;
> +
> +	ep = &pci->ep;
> +	ep->ops = &pcie_ep_ops;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> +	if (!res)
> +		return -EINVAL;
> +
> +	ep->phys_base = res->start;
> +	ep->addr_size = resource_size(res);
> +
> +	ret = dw_pcie_ep_init(ep);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize endpoint\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct dw_pcie *pci;
> +	struct ls_pcie_ep *pcie;
> +	struct resource *dbi_base;
> +	int ret;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> +	if (!pci)
> +		return -ENOMEM;
> +
> +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> +	if (IS_ERR(pci->dbi_base))
> +		return PTR_ERR(pci->dbi_base);
> +
> +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> +	pci->dev = dev;
> +	pci->ops = &ls_pcie_ep_ops;
> +	pcie->pci = pci;
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	ret = ls_add_pcie_ep(pcie, pdev);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver ls_pcie_ep_driver = {
> +	.driver = {
> +		.name = "layerscape-pcie-ep",
> +		.of_match_table = ls_pcie_ep_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> -- 
> 1.7.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
  2019-02-19 11:27   ` Lorenzo Pieralisi
@ 2019-02-20  3:09     ` Xiaowei Bao
  2019-02-20 10:06       ` Lorenzo Pieralisi
  0 siblings, 1 reply; 10+ messages in thread
From: Xiaowei Bao @ 2019-02-20  3:09 UTC (permalink / raw)
  To: Lorenzo Pieralisi
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, Leo Li, kishon, arnd,
	gregkh, M.h. Lian, Mingkai Hu, Roy Zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev



-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Sent: 2019Äê2ÔÂ19ÈÕ 19:27
To: Xiaowei Bao <xiaowei.bao@nxp.com>
Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.

On Tue, Jan 22, 2019 at 02:33:27PM +0800, Xiaowei Bao wrote:
> Add the PCIe EP mode support for layerscape platform.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> depends on: 
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
> chwork.kernel.org%2Fproject%2Flinux-pci%2Flist%2F%3Fseries%3D66177&amp
> ;data=02%7C01%7Cxiaowei.bao%40nxp.com%7C6f8772ba47c74d8ee0aa08d6965d3e
> b4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636861724572611193&amp
> ;sdata=b3Acj0fu7c9vSoHe9VzeAkEMbMkpyfYPsXtf6fA8Flk%3D&amp;reserved=0
> 
> v2:
>  - remove the EP mode check function.
> v3:
>  - modif the return value when enter default case.
> v4:
>  - no change.
> v5:
>  - no change.
> v6:
>  - modify the code base on the submit patch of the EP framework.

Can I apply this series to my pci/endpoint branch (where I queued Kishon's EP features rework patches) ? Can you check please ?
[Xiaowei Bao] of course, in my patch, I found a compile warning, but this series patch have approved by you, I don't know how to do, the compile warning: " struct pci_epc *epc = ep->epc;" in "ls_pcie_ep_init" function, I am so sorry, could you help me remove this code, thanks a lot.

Thanks,
Lorenzo

>  drivers/pci/controller/dwc/Makefile            |    2 +-
>  drivers/pci/controller/dwc/pci-layerscape-ep.c |  157 
> ++++++++++++++++++++++++
>  2 files changed, 158 insertions(+), 1 deletions(-)  create mode 
> 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
> 
> diff --git a/drivers/pci/controller/dwc/Makefile 
> b/drivers/pci/controller/dwc/Makefile
> index 7bcdcdf..b5f3b83 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o diff --git 
> a/drivers/pci/controller/dwc/pci-layerscape-ep.c 
> b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> new file mode 100644
> index 0000000..ddc2dbb
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe controller EP driver for Freescale Layerscape SoCs
> + *
> + * Copyright (C) 2018 NXP Semiconductor.
> + *
> + * Author: Xiaowei Bao <xiaowei.bao@nxp.com>  */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> +
> +struct ls_pcie_ep {
> +	struct dw_pcie		*pci;
> +};
> +
> +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> +
> +static int ls_pcie_establish_link(struct dw_pcie *pci) {
> +	return 0;
> +}
> +
> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> +	.start_link = ls_pcie_establish_link, };
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> +	{ .compatible = "fsl,ls-pcie-ep",},
> +	{ },
> +};
> +
> +static const struct pci_epc_features ls_pcie_epc_features = {
> +	.linkup_notifier = false,
> +	.msi_capable = true,
> +	.msix_capable = false,
> +};
> +
> +static const struct pci_epc_features* ls_pcie_ep_get_features(struct 
> +dw_pcie_ep *ep) {
> +	return &ls_pcie_epc_features;
> +}
> +
> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep) {
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	struct pci_epc *epc = ep->epc;
> +	enum pci_barno bar;
> +
> +	for (bar = BAR_0; bar <= BAR_5; bar++)
> +		dw_pcie_ep_reset_bar(pci, bar);
> +}
> +
> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> +				  enum pci_epc_irq_type type, u16 interrupt_num) {
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	switch (type) {
> +	case PCI_EPC_IRQ_LEGACY:
> +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> +	case PCI_EPC_IRQ_MSI:
> +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> +	case PCI_EPC_IRQ_MSIX:
> +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> +	default:
> +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
> +		return -EINVAL;
> +	}
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> +	.ep_init = ls_pcie_ep_init,
> +	.raise_irq = ls_pcie_ep_raise_irq,
> +	.get_features = ls_pcie_ep_get_features, };
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> +					struct platform_device *pdev)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	struct dw_pcie_ep *ep;
> +	struct resource *res;
> +	int ret;
> +
> +	ep = &pci->ep;
> +	ep->ops = &pcie_ep_ops;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> +	if (!res)
> +		return -EINVAL;
> +
> +	ep->phys_base = res->start;
> +	ep->addr_size = resource_size(res);
> +
> +	ret = dw_pcie_ep_init(ep);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize endpoint\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __init ls_pcie_ep_probe(struct platform_device *pdev) {
> +	struct device *dev = &pdev->dev;
> +	struct dw_pcie *pci;
> +	struct ls_pcie_ep *pcie;
> +	struct resource *dbi_base;
> +	int ret;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> +	if (!pci)
> +		return -ENOMEM;
> +
> +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> +	if (IS_ERR(pci->dbi_base))
> +		return PTR_ERR(pci->dbi_base);
> +
> +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> +	pci->dev = dev;
> +	pci->ops = &ls_pcie_ep_ops;
> +	pcie->pci = pci;
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	ret = ls_add_pcie_ep(pcie, pdev);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver ls_pcie_ep_driver = {
> +	.driver = {
> +		.name = "layerscape-pcie-ep",
> +		.of_match_table = ls_pcie_ep_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> --
> 1.7.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
  2019-02-20  3:09     ` Xiaowei Bao
@ 2019-02-20 10:06       ` Lorenzo Pieralisi
  2019-02-21  3:18         ` Xiaowei Bao
  0 siblings, 1 reply; 10+ messages in thread
From: Lorenzo Pieralisi @ 2019-02-20 10:06 UTC (permalink / raw)
  To: Xiaowei Bao
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, Leo Li, kishon, arnd,
	gregkh, M.h. Lian, Mingkai Hu, Roy Zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev

On Wed, Feb 20, 2019 at 03:09:01AM +0000, Xiaowei Bao wrote:
> 
> 
> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
> Sent: 2019年2月19日 19:27
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> Subject: Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
> 
> On Tue, Jan 22, 2019 at 02:33:27PM +0800, Xiaowei Bao wrote:
> > Add the PCIe EP mode support for layerscape platform.
> > 
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> > Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> > Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > depends on: 
> > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
> > chwork.kernel.org%2Fproject%2Flinux-pci%2Flist%2F%3Fseries%3D66177&amp
> > ;data=02%7C01%7Cxiaowei.bao%40nxp.com%7C6f8772ba47c74d8ee0aa08d6965d3e
> > b4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636861724572611193&amp
> > ;sdata=b3Acj0fu7c9vSoHe9VzeAkEMbMkpyfYPsXtf6fA8Flk%3D&amp;reserved=0
> > 
> > v2:
> >  - remove the EP mode check function.
> > v3:
> >  - modif the return value when enter default case.
> > v4:
> >  - no change.
> > v5:
> >  - no change.
> > v6:
> >  - modify the code base on the submit patch of the EP framework.
> 
> Can I apply this series to my pci/endpoint branch (where I queued Kishon's EP features rework patches) ? Can you check please ?
> [Xiaowei Bao] of course, in my patch, I found a compile warning, but
> this series patch have approved by you, I don't know how to do, the
> compile warning: " struct pci_epc *epc = ep->epc;" in
> "ls_pcie_ep_init" function, I am so sorry, could you help me remove
> this code, thanks a lot.

If you want me to apply your patches you need to rebase them against
my pci/endpoint branch and make sure the code is correct, I have
applied your previous series but as you know it failed because it
depends on Kishon's clean-up series.

So rebase your code against my pci/endpoint branch, make sure it
compiles with no warnings, test it and send a v7.

Thanks,
Lorenzo

> Thanks,
> Lorenzo
> 
> >  drivers/pci/controller/dwc/Makefile            |    2 +-
> >  drivers/pci/controller/dwc/pci-layerscape-ep.c |  157 
> > ++++++++++++++++++++++++
> >  2 files changed, 158 insertions(+), 1 deletions(-)  create mode 
> > 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
> > 
> > diff --git a/drivers/pci/controller/dwc/Makefile 
> > b/drivers/pci/controller/dwc/Makefile
> > index 7bcdcdf..b5f3b83 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> >  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> >  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> >  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> >  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> >  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> >  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o diff --git 
> > a/drivers/pci/controller/dwc/pci-layerscape-ep.c 
> > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > new file mode 100644
> > index 0000000..ddc2dbb
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > @@ -0,0 +1,157 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe controller EP driver for Freescale Layerscape SoCs
> > + *
> > + * Copyright (C) 2018 NXP Semiconductor.
> > + *
> > + * Author: Xiaowei Bao <xiaowei.bao@nxp.com>  */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/init.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_address.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/resource.h>
> > +
> > +#include "pcie-designware.h"
> > +
> > +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > +
> > +struct ls_pcie_ep {
> > +	struct dw_pcie		*pci;
> > +};
> > +
> > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > +
> > +static int ls_pcie_establish_link(struct dw_pcie *pci) {
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > +	.start_link = ls_pcie_establish_link, };
> > +
> > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > +	{ .compatible = "fsl,ls-pcie-ep",},
> > +	{ },
> > +};
> > +
> > +static const struct pci_epc_features ls_pcie_epc_features = {
> > +	.linkup_notifier = false,
> > +	.msi_capable = true,
> > +	.msix_capable = false,
> > +};
> > +
> > +static const struct pci_epc_features* ls_pcie_ep_get_features(struct 
> > +dw_pcie_ep *ep) {
> > +	return &ls_pcie_epc_features;
> > +}
> > +
> > +static void ls_pcie_ep_init(struct dw_pcie_ep *ep) {
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	struct pci_epc *epc = ep->epc;
> > +	enum pci_barno bar;
> > +
> > +	for (bar = BAR_0; bar <= BAR_5; bar++)
> > +		dw_pcie_ep_reset_bar(pci, bar);
> > +}
> > +
> > +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > +				  enum pci_epc_irq_type type, u16 interrupt_num) {
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +
> > +	switch (type) {
> > +	case PCI_EPC_IRQ_LEGACY:
> > +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> > +	case PCI_EPC_IRQ_MSI:
> > +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> > +	case PCI_EPC_IRQ_MSIX:
> > +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> > +	default:
> > +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> > +static struct dw_pcie_ep_ops pcie_ep_ops = {
> > +	.ep_init = ls_pcie_ep_init,
> > +	.raise_irq = ls_pcie_ep_raise_irq,
> > +	.get_features = ls_pcie_ep_get_features, };
> > +
> > +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> > +					struct platform_device *pdev)
> > +{
> > +	struct dw_pcie *pci = pcie->pci;
> > +	struct device *dev = pci->dev;
> > +	struct dw_pcie_ep *ep;
> > +	struct resource *res;
> > +	int ret;
> > +
> > +	ep = &pci->ep;
> > +	ep->ops = &pcie_ep_ops;
> > +
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> > +	if (!res)
> > +		return -EINVAL;
> > +
> > +	ep->phys_base = res->start;
> > +	ep->addr_size = resource_size(res);
> > +
> > +	ret = dw_pcie_ep_init(ep);
> > +	if (ret) {
> > +		dev_err(dev, "failed to initialize endpoint\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int __init ls_pcie_ep_probe(struct platform_device *pdev) {
> > +	struct device *dev = &pdev->dev;
> > +	struct dw_pcie *pci;
> > +	struct ls_pcie_ep *pcie;
> > +	struct resource *dbi_base;
> > +	int ret;
> > +
> > +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> > +	if (!pci)
> > +		return -ENOMEM;
> > +
> > +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > +	if (IS_ERR(pci->dbi_base))
> > +		return PTR_ERR(pci->dbi_base);
> > +
> > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > +	pci->dev = dev;
> > +	pci->ops = &ls_pcie_ep_ops;
> > +	pcie->pci = pci;
> > +
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	ret = ls_add_pcie_ep(pcie, pdev);
> > +
> > +	return ret;
> > +}
> > +
> > +static struct platform_driver ls_pcie_ep_driver = {
> > +	.driver = {
> > +		.name = "layerscape-pcie-ep",
> > +		.of_match_table = ls_pcie_ep_of_match,
> > +		.suppress_bind_attrs = true,
> > +	},
> > +};
> > +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> > --
> > 1.7.1
> > 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
  2019-02-20 10:06       ` Lorenzo Pieralisi
@ 2019-02-21  3:18         ` Xiaowei Bao
  0 siblings, 0 replies; 10+ messages in thread
From: Xiaowei Bao @ 2019-02-21  3:18 UTC (permalink / raw)
  To: Lorenzo Pieralisi
  Cc: bhelgaas, robh+dt, mark.rutland, shawnguo, Leo Li, kishon, arnd,
	gregkh, M.h. Lian, Mingkai Hu, Roy Zang, kstewart,
	cyrille.pitchen, pombredanne, shawn.lin, linux-pci, devicetree,
	linux-kernel, linux-arm-kernel, linuxppc-dev



-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Sent: 2019年2月20日 18:06
To: Xiaowei Bao <xiaowei.bao@nxp.com>
Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.

On Wed, Feb 20, 2019 at 03:09:01AM +0000, Xiaowei Bao wrote:
> 
> 
> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: 2019年2月19日 19:27
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; 
> shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; 
> arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian 
> <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang 
> <roy.zang@nxp.com>; kstewart@linuxfoundation.org; 
> cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; 
> shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; 
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; 
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> Subject: Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
> 
> On Tue, Jan 22, 2019 at 02:33:27PM +0800, Xiaowei Bao wrote:
> > Add the PCIe EP mode support for layerscape platform.
> > 
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> > Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> > Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > depends on: 
> > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fp
> > at 
> > chwork.kernel.org%2Fproject%2Flinux-pci%2Flist%2F%3Fseries%3D66177&a
> > mp 
> > ;data=02%7C01%7Cxiaowei.bao%40nxp.com%7C6f8772ba47c74d8ee0aa08d6965d
> > 3e 
> > b4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636861724572611193&a
> > mp
> > ;sdata=b3Acj0fu7c9vSoHe9VzeAkEMbMkpyfYPsXtf6fA8Flk%3D&amp;reserved=0
> > 
> > v2:
> >  - remove the EP mode check function.
> > v3:
> >  - modif the return value when enter default case.
> > v4:
> >  - no change.
> > v5:
> >  - no change.
> > v6:
> >  - modify the code base on the submit patch of the EP framework.
> 
> Can I apply this series to my pci/endpoint branch (where I queued Kishon's EP features rework patches) ? Can you check please ?
> [Xiaowei Bao] of course, in my patch, I found a compile warning, but 
> this series patch have approved by you, I don't know how to do, the 
> compile warning: " struct pci_epc *epc = ep->epc;" in 
> "ls_pcie_ep_init" function, I am so sorry, could you help me remove 
> this code, thanks a lot.

If you want me to apply your patches you need to rebase them against my pci/endpoint branch and make sure the code is correct, I have applied your previous series but as you know it failed because it depends on Kishon's clean-up series.

So rebase your code against my pci/endpoint branch, make sure it compiles with no warnings, test it and send a v7.
[Xiaowei Bao] Hi Lorenzo, I have completed the test with my v7 patch in pci/endpoint branch, fix up the compile warning issue, I will send the v7 patch later. Thanks a lot. 

Thanks,
Lorenzo

> Thanks,
> Lorenzo
> 
> >  drivers/pci/controller/dwc/Makefile            |    2 +-
> >  drivers/pci/controller/dwc/pci-layerscape-ep.c |  157
> > ++++++++++++++++++++++++
> >  2 files changed, 158 insertions(+), 1 deletions(-)  create mode
> > 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
> > 
> > diff --git a/drivers/pci/controller/dwc/Makefile
> > b/drivers/pci/controller/dwc/Makefile
> > index 7bcdcdf..b5f3b83 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> >  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> >  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> >  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o 
> > +pci-layerscape-ep.o
> >  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> >  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> >  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o diff --git 
> > a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > new file mode 100644
> > index 0000000..ddc2dbb
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > @@ -0,0 +1,157 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe controller EP driver for Freescale Layerscape SoCs
> > + *
> > + * Copyright (C) 2018 NXP Semiconductor.
> > + *
> > + * Author: Xiaowei Bao <xiaowei.bao@nxp.com>  */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/init.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_address.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/resource.h>
> > +
> > +#include "pcie-designware.h"
> > +
> > +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > +
> > +struct ls_pcie_ep {
> > +	struct dw_pcie		*pci;
> > +};
> > +
> > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > +
> > +static int ls_pcie_establish_link(struct dw_pcie *pci) {
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > +	.start_link = ls_pcie_establish_link, };
> > +
> > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > +	{ .compatible = "fsl,ls-pcie-ep",},
> > +	{ },
> > +};
> > +
> > +static const struct pci_epc_features ls_pcie_epc_features = {
> > +	.linkup_notifier = false,
> > +	.msi_capable = true,
> > +	.msix_capable = false,
> > +};
> > +
> > +static const struct pci_epc_features* 
> > +ls_pcie_ep_get_features(struct dw_pcie_ep *ep) {
> > +	return &ls_pcie_epc_features;
> > +}
> > +
> > +static void ls_pcie_ep_init(struct dw_pcie_ep *ep) {
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	struct pci_epc *epc = ep->epc;
> > +	enum pci_barno bar;
> > +
> > +	for (bar = BAR_0; bar <= BAR_5; bar++)
> > +		dw_pcie_ep_reset_bar(pci, bar);
> > +}
> > +
> > +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > +				  enum pci_epc_irq_type type, u16 interrupt_num) {
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +
> > +	switch (type) {
> > +	case PCI_EPC_IRQ_LEGACY:
> > +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> > +	case PCI_EPC_IRQ_MSI:
> > +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> > +	case PCI_EPC_IRQ_MSIX:
> > +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> > +	default:
> > +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> > +static struct dw_pcie_ep_ops pcie_ep_ops = {
> > +	.ep_init = ls_pcie_ep_init,
> > +	.raise_irq = ls_pcie_ep_raise_irq,
> > +	.get_features = ls_pcie_ep_get_features, };
> > +
> > +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> > +					struct platform_device *pdev)
> > +{
> > +	struct dw_pcie *pci = pcie->pci;
> > +	struct device *dev = pci->dev;
> > +	struct dw_pcie_ep *ep;
> > +	struct resource *res;
> > +	int ret;
> > +
> > +	ep = &pci->ep;
> > +	ep->ops = &pcie_ep_ops;
> > +
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> > +	if (!res)
> > +		return -EINVAL;
> > +
> > +	ep->phys_base = res->start;
> > +	ep->addr_size = resource_size(res);
> > +
> > +	ret = dw_pcie_ep_init(ep);
> > +	if (ret) {
> > +		dev_err(dev, "failed to initialize endpoint\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int __init ls_pcie_ep_probe(struct platform_device *pdev) {
> > +	struct device *dev = &pdev->dev;
> > +	struct dw_pcie *pci;
> > +	struct ls_pcie_ep *pcie;
> > +	struct resource *dbi_base;
> > +	int ret;
> > +
> > +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> > +	if (!pci)
> > +		return -ENOMEM;
> > +
> > +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > +	if (IS_ERR(pci->dbi_base))
> > +		return PTR_ERR(pci->dbi_base);
> > +
> > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > +	pci->dev = dev;
> > +	pci->ops = &ls_pcie_ep_ops;
> > +	pcie->pci = pci;
> > +
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	ret = ls_add_pcie_ep(pcie, pdev);
> > +
> > +	return ret;
> > +}
> > +
> > +static struct platform_driver ls_pcie_ep_driver = {
> > +	.driver = {
> > +		.name = "layerscape-pcie-ep",
> > +		.of_match_table = ls_pcie_ep_of_match,
> > +		.suppress_bind_attrs = true,
> > +	},
> > +};
> > +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> > --
> > 1.7.1
> > 

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-22  6:33 [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Xiaowei Bao
2019-01-22  6:33 ` [PATCHv6 2/4] arm64: dts: Add the PCIE EP node in dts Xiaowei Bao
2019-01-22  6:33 ` [PATCHv6 3/4] pci: layerscape: Add the EP mode support Xiaowei Bao
2019-02-19 11:27   ` Lorenzo Pieralisi
2019-02-20  3:09     ` Xiaowei Bao
2019-02-20 10:06       ` Lorenzo Pieralisi
2019-02-21  3:18         ` Xiaowei Bao
2019-01-22  6:33 ` [PATCHv6 4/4] misc: pci_endpoint_test: Add the layerscape EP device support Xiaowei Bao
2019-02-05 18:02 ` [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode Lorenzo Pieralisi
2019-02-19  6:57   ` Xiaowei Bao

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox