From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-ntb@googlegroups.com,
linux-pci@vger.kernel.org, iommu@lists.linux-foundation.org,
linux-kselftest@vger.kernel.org, Jon Mason <jdmason@kudzu.us>,
Bjorn Helgaas <bhelgaas@google.com>,
Joerg Roedel <joro@8bytes.org>
Cc: Allen Hubbe <allenbh@gmail.com>,
Dave Jiang <dave.jiang@intel.com>,
Serge Semin <fancer.lancer@gmail.com>,
Eric Pilmore <epilmore@gigaio.com>,
Logan Gunthorpe <logang@deltatee.com>
Subject: [PATCH v2 11/12] NTB: Add ntb_msi_test support to ntb_test
Date: Wed, 13 Feb 2019 10:54:53 -0700 [thread overview]
Message-ID: <20190213175454.7506-12-logang@deltatee.com> (raw)
In-Reply-To: <20190213175454.7506-1-logang@deltatee.com>
When the ntb_msi_test module is available, the test code will trigger
each of the interrupts and ensure the corresponding occurrences files
gets incremented.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
---
tools/testing/selftests/ntb/ntb_test.sh | 54 ++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh
index 17ca36403d04..1a10b8f67727 100755
--- a/tools/testing/selftests/ntb/ntb_test.sh
+++ b/tools/testing/selftests/ntb/ntb_test.sh
@@ -87,10 +87,10 @@ set -e
function _modprobe()
{
- modprobe "$@"
+ modprobe "$@" || return 1
if [[ "$REMOTE_HOST" != "" ]]; then
- ssh "$REMOTE_HOST" modprobe "$@"
+ ssh "$REMOTE_HOST" modprobe "$@" || return 1
fi
}
@@ -451,6 +451,30 @@ function pingpong_test()
echo " Passed"
}
+function msi_test()
+{
+ LOC=$1
+ REM=$2
+
+ write_file 1 $LOC/ready
+
+ echo "Running MSI interrupt tests on: $(subdirname $LOC) / $(subdirname $REM)"
+
+ CNT=$(read_file "$LOC/count")
+ for ((i = 0; i < $CNT; i++)); do
+ START=$(read_file $REM/../irq${i}_occurrences)
+ write_file $i $LOC/trigger
+ END=$(read_file $REM/../irq${i}_occurrences)
+
+ if [[ $(($END - $START)) != 1 ]]; then
+ echo "MSI did not trigger the interrupt on the remote side!" >&2
+ exit 1
+ fi
+ done
+
+ echo " Passed"
+}
+
function perf_test()
{
USE_DMA=$1
@@ -529,6 +553,29 @@ function ntb_pingpong_tests()
_modprobe -r ntb_pingpong
}
+function ntb_msi_tests()
+{
+ LOCAL_MSI="$DEBUGFS/ntb_msi_test/$LOCAL_DEV"
+ REMOTE_MSI="$REMOTE_HOST:$DEBUGFS/ntb_msi_test/$REMOTE_DEV"
+
+ echo "Starting ntb_msi_test tests..."
+
+ if ! _modprobe ntb_msi_test 2> /dev/null; then
+ echo " Not doing MSI tests seeing the module is not available."
+ return
+ fi
+
+ port_test $LOCAL_MSI $REMOTE_MSI
+
+ LOCAL_PEER="$LOCAL_MSI/peer$LOCAL_PIDX"
+ REMOTE_PEER="$REMOTE_MSI/peer$REMOTE_PIDX"
+
+ msi_test $LOCAL_PEER $REMOTE_PEER
+ msi_test $REMOTE_PEER $LOCAL_PEER
+
+ _modprobe -r ntb_msi_test
+}
+
function ntb_perf_tests()
{
LOCAL_PERF="$DEBUGFS/ntb_perf/$LOCAL_DEV"
@@ -550,6 +597,7 @@ function cleanup()
_modprobe -r ntb_perf 2> /dev/null
_modprobe -r ntb_pingpong 2> /dev/null
_modprobe -r ntb_transport 2> /dev/null
+ _modprobe -r ntb_msi_test 2> /dev/null
set -e
}
@@ -586,5 +634,7 @@ ntb_tool_tests
echo
ntb_pingpong_tests
echo
+ntb_msi_tests
+echo
ntb_perf_tests
echo
--
2.19.0
next prev parent reply other threads:[~2019-02-13 17:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 17:54 [PATCH v2 00/12] Support using MSI interrupts in ntb_transport Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 01/12] iommu/vt-d: Implement dma_[un]map_resource() Logan Gunthorpe
2019-02-13 17:57 ` Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 02/12] NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 03/12] iommu/vt-d: Add helper to set an IRTE to verify only the bus number Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 04/12] iommu/vt-d: Allow interrupts from the entire bus for aliased devices Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 05/12] PCI/MSI: Support allocating virtual MSI interrupts Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 06/12] PCI/switchtec: Add module parameter to request more interrupts Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 07/12] NTB: Introduce functions to calculate multi-port resource index Logan Gunthorpe
2019-03-06 1:24 ` Serge Semin
2019-03-06 19:11 ` Logan Gunthorpe
2019-03-06 22:45 ` Serge Semin
2019-03-06 23:22 ` Logan Gunthorpe
2019-03-12 20:42 ` Serge Semin
2019-03-12 21:30 ` Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 08/12] NTB: Rename ntb.c to support multiple source files in the module Logan Gunthorpe
2019-02-13 17:54 ` [PATCH v2 09/12] NTB: Introduce MSI library Logan Gunthorpe
2019-03-06 20:26 ` Serge Semin
2019-03-06 21:35 ` Logan Gunthorpe
2019-03-06 23:13 ` Serge Semin
2019-02-13 17:54 ` [PATCH v2 10/12] NTB: Introduce NTB MSI Test Client Logan Gunthorpe
2019-03-06 20:44 ` Serge Semin
2019-03-06 21:39 ` Logan Gunthorpe
2019-02-13 17:54 ` Logan Gunthorpe [this message]
2019-02-13 17:54 ` [PATCH v2 12/12] NTB: Add MSI interrupt support to ntb_transport Logan Gunthorpe
2019-02-26 9:34 ` [PATCH v2 00/12] Support using MSI interrupts in ntb_transport Joerg Roedel
2019-02-26 16:18 ` Logan Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190213175454.7506-12-logang@deltatee.com \
--to=logang@deltatee.com \
--cc=allenbh@gmail.com \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=epilmore@gigaio.com \
--cc=fancer.lancer@gmail.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jdmason@kudzu.us \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-ntb@googlegroups.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).