From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH v2 5/7] dt-bindings: PCI: qcom: Add QCS404 to the binding
Date: Mon, 18 Feb 2019 22:04:05 -0800 [thread overview]
Message-ID: <20190219060407.15263-6-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190219060407.15263-1-bjorn.andersson@linaro.org>
The Qualcomm QCS404 platform contains a PCIe controller, add this to the
Qualcomm PCI binding document. The controller is the same version as the
one used in IPQ4019, but the PHY part is described separately, hence the
difference in clocks and resets.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../devicetree/bindings/pci/qcom,pcie.txt | 25 +++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 1fd703bd73e0..ada80b01bf0c 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -10,6 +10,7 @@
- "qcom,pcie-msm8996" for msm8996 or apq8096
- "qcom,pcie-ipq4019" for ipq4019
- "qcom,pcie-ipq8074" for ipq8074
+ - "qcom,pcie-qcs404" for qcs404
- reg:
Usage: required
@@ -116,6 +117,15 @@
- "ahb" AHB clock
- "aux" Auxiliary clock
+- clock-names:
+ Usage: required for qcs404
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "iface" AHB clock
+ - "aux" Auxiliary clock
+ - "master_bus" AXI Master clock
+ - "slave_bus" AXI Slave clock
+
- resets:
Usage: required
Value type: <prop-encoded-array>
@@ -167,6 +177,17 @@
- "ahb" AHB Reset
- "axi_m_sticky" AXI Master Sticky reset
+- reset-names:
+ Usage: required for qcs404
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "axi_m" AXI Master reset
+ - "axi_s" AXI Slave reset
+ - "axi_m_sticky" AXI Master Sticky reset
+ - "pipe_sticky" PIPE sticky reset
+ - "pwr" PWR reset
+ - "ahb" AHB reset
+
- power-domains:
Usage: required for apq8084 and msm8996/apq8096
Value type: <prop-encoded-array>
@@ -195,12 +216,12 @@
Definition: A phandle to the PCIe endpoint power supply
- phys:
- Usage: required for apq8084
+ Usage: required for apq8084 and qcs404
Value type: <phandle>
Definition: List of phandle(s) as listed in phy-names property
- phy-names:
- Usage: required for apq8084
+ Usage: required for apq8084 and qcs404
Value type: <stringlist>
Definition: Should contain "pciephy"
--
2.18.0
next prev parent reply other threads:[~2019-02-19 6:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 6:04 [PATCH v2 0/7] QCS404 PCIe PHY and controller Bjorn Andersson
2019-02-19 6:04 ` [PATCH v2 1/7] clk: gcc-qcs404: Add PCIe resets Bjorn Andersson
2019-02-22 19:54 ` Rob Herring
2019-02-19 6:04 ` [PATCH v2 2/7] dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY Bjorn Andersson
2019-02-22 19:57 ` Rob Herring
2019-02-27 4:25 ` Bjorn Andersson
2019-04-01 14:58 ` Lorenzo Pieralisi
2019-02-19 6:04 ` [PATCH v2 3/7] phy: qcom: Add Qualcomm PCIe2 PHY driver Bjorn Andersson
2019-04-18 4:59 ` Vinod Koul
2019-02-19 6:04 ` [PATCH v2 4/7] PCI: qcom: Use clk_bulk API for 2.4.0 controllers Bjorn Andersson
2019-02-26 9:05 ` Stanimir Varbanov
2019-02-19 6:04 ` Bjorn Andersson [this message]
2019-02-22 20:33 ` [PATCH v2 5/7] dt-bindings: PCI: qcom: Add QCS404 to the binding Rob Herring
2019-02-19 6:04 ` [PATCH v2 6/7] PCI: qcom: Add QCS404 PCIe controller support Bjorn Andersson
2019-04-01 15:13 ` Lorenzo Pieralisi
2019-02-19 6:04 ` [PATCH v2 7/7] arm64: dts: qcom: qcs404: Add PCIe related nodes Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219060407.15263-6-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bhelgaas@google.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=svarbanov@mm-sol.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).