* [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support
@ 2019-02-14 15:20 Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-14 15:20 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi
Cc: linux-kernel, linux-pci, devicetree, lftan.linux, Ley Foon Tan
Add PCIe Root Port support for Stratix 10 device and also update
device tree binding documentation.
v3 -> v4:
---------
- Separate Kconfig change to a patch
- Change cast to mask
v2 -> v3:
---------
- Rename Stratix10 to Stratix 10.
- Change bool s10_flag to enum version.
v1 -> v2:
---------
- Add define S10_TLP_FMTTYPE_* macros.
- Remove initialize structure members to NULL/zero.
- Rename *_funcs to *_data.
- Update comment and fix coding style warning from checkpatch.pl.
- Rename StratixXX to stratix10.
History:
--------
[v1]: https://lkml.org/lkml/2018/12/26/68
[v2]: https://lkml.org/lkml/2018/12/31/46
[v3]: https://lkml.org/lkml/2019/1/2/16
Ley Foon Tan (3):
PCI: altera: Add Stratix 10 PCIe support
PCI: altera: Enable driver on ARM64
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
.../devicetree/bindings/pci/altera-pcie.txt | 4 +-
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/pcie-altera.c | 246 ++++++++++++++++++--
3 files changed, 226 insertions(+), 26 deletions(-)
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support
2019-02-14 15:20 [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support Ley Foon Tan
@ 2019-02-14 15:20 ` Ley Foon Tan
2019-02-19 16:23 ` Lorenzo Pieralisi
2019-02-14 15:20 ` [PATCH v4 2/3] PCI: altera: Enable driver on ARM64 Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 Ley Foon Tan
2 siblings, 1 reply; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-14 15:20 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi
Cc: linux-kernel, linux-pci, devicetree, lftan.linux, Ley Foon Tan
Add PCIe Root Port support for Stratix 10 device.
Main differences:
- HIP interface to access Root Port configuration register.
- TLP programming flow:
- One REG0 register
- Don't need to check alignment
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
---
drivers/pci/controller/pcie-altera.c | 246 ++++++++++++++++++++++++++++++----
1 files changed, 222 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 7d05e51..76bb6a6 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -11,6 +11,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/init.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
@@ -37,7 +38,12 @@
#define RP_LTSSM_MASK 0x1f
#define LTSSM_L0 0xf
-#define PCIE_CAP_OFFSET 0x80
+#define S10_RP_TX_CNTRL 0x2004
+#define S10_RP_RXCPL_REG 0x2008
+#define S10_RP_RXCPL_STATUS 0x200C
+#define S10_RP_CFG_ADDR(pcie, reg) \
+ (((pcie)->hip_base) + (reg) + (1 << 20))
+
/* TLP configuration type 0 and 1 */
#define TLP_FMTTYPE_CFGRD0 0x04 /* Configuration Read Type 0 */
#define TLP_FMTTYPE_CFGWR0 0x44 /* Configuration Write Type 0 */
@@ -49,18 +55,19 @@
#define RP_DEVFN 0
#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn))
#define TLP_CFGRD_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0 \
- : TLP_FMTTYPE_CFGRD1) << 24) | \
- TLP_PAYLOAD_SIZE)
+ ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0 \
+ : pcie->pcie_data->cfgrd1) << 24) | \
+ TLP_PAYLOAD_SIZE)
#define TLP_CFGWR_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0 \
- : TLP_FMTTYPE_CFGWR1) << 24) | \
- TLP_PAYLOAD_SIZE)
+ ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0 \
+ : pcie->pcie_data->cfgwr1) << 24) | \
+ TLP_PAYLOAD_SIZE)
#define TLP_CFG_DW1(pcie, tag, be) \
- (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
+ (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
#define TLP_CFG_DW2(bus, devfn, offset) \
(((bus) << 24) | ((devfn) << 16) | (offset))
#define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
+#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
#define TLP_HDR_SIZE 3
#define TLP_LOOP 500
@@ -69,14 +76,43 @@
#define DWORD_MASK 3
+#define S10_TLP_FMTTYPE_CFGRD0 0x05
+#define S10_TLP_FMTTYPE_CFGRD1 0x04
+#define S10_TLP_FMTTYPE_CFGWR0 0x45
+#define S10_TLP_FMTTYPE_CFGWR1 0x44
+
+enum altera_pcie_version {
+ ALTERA_PCIE_V1 = 0,
+ ALTERA_PCIE_V2,
+};
+
struct altera_pcie {
struct platform_device *pdev;
- void __iomem *cra_base; /* DT Cra */
+ void __iomem *cra_base;
+ void __iomem *hip_base;
int irq;
u8 root_bus_nr;
struct irq_domain *irq_domain;
struct resource bus_range;
struct list_head resources;
+ const struct altera_pcie_data *pcie_data;
+};
+
+struct altera_pcie_data {
+ int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
+ void (*tlp_write_pkt)(struct altera_pcie *pcie, u32 *headers,
+ u32 data, bool align);
+ bool (*get_link_status)(struct altera_pcie *pcie);
+ int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
+ int size, u32 *value);
+ int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int where,
+ int size, u32 value);
+ enum altera_pcie_version version;
+ u32 cap_offset; /* PCIe capability structure register offset */
+ u32 cfgrd0;
+ u32 cfgrd1;
+ u32 cfgwr0;
+ u32 cfgwr1;
};
struct tlp_rp_regpair_t {
@@ -101,6 +137,15 @@ static bool altera_pcie_link_up(struct altera_pcie *pcie)
return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
}
+static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
+{
+ void __iomem *addr = S10_RP_CFG_ADDR(pcie,
+ pcie->pcie_data->cap_offset +
+ PCI_EXP_LNKSTA);
+
+ return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
+}
+
/*
* Altera PCIe port uses BAR0 of RC's configuration space as the translation
* from PCI bus to native BUS. Entire DDR region is mapped into PCIe space
@@ -128,12 +173,18 @@ static void tlp_write_tx(struct altera_pcie *pcie,
cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
}
+static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0, u32 ctrl)
+{
+ cra_writel(pcie, reg0, RP_TX_REG0);
+ cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
+}
+
static bool altera_pcie_valid_device(struct altera_pcie *pcie,
struct pci_bus *bus, int dev)
{
/* If there is no link, then there is no device */
if (bus->number != pcie->root_bus_nr) {
- if (!altera_pcie_link_up(pcie))
+ if (!pcie->pcie_data->get_link_status(pcie))
return false;
}
@@ -183,6 +234,46 @@ static int tlp_read_packet(struct altera_pcie *pcie, u32 *value)
return PCIBIOS_DEVICE_NOT_FOUND;
}
+static int s10_tlp_read_packet(struct altera_pcie *pcie, u32 *value)
+{
+ int i;
+ u32 ctrl;
+ u32 comp_status;
+ u32 dw[4];
+ u32 count = 0;
+
+ for (i = 0; i < TLP_LOOP; i++) {
+ ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
+ if (!(ctrl & RP_RXCPL_SOP))
+ continue;
+
+ /* Read first DW */
+ dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
+
+ /* Poll for EOP */
+ for (i = 0; i < TLP_LOOP; i++) {
+ ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
+ dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
+ if (ctrl & RP_RXCPL_EOP) {
+ comp_status = TLP_COMP_STATUS(dw[1]);
+ if (comp_status)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (value &&
+ TLP_BYTE_COUNT(dw[1]) == sizeof(u32) &&
+ count >= 3)
+ *value = dw[3];
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+ }
+
+ udelay(5);
+ }
+
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
u32 data, bool align)
{
@@ -210,6 +301,15 @@ static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
tlp_write_tx(pcie, &tlp_rp_regdata);
}
+static void s10_tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
+ u32 data, bool dummy)
+{
+ s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
+ s10_tlp_write_tx(pcie, headers[1], 0);
+ s10_tlp_write_tx(pcie, headers[2], 0);
+ s10_tlp_write_tx(pcie, data, RP_TX_EOP);
+}
+
static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
int where, u8 byte_en, u32 *value)
{
@@ -219,9 +319,9 @@ static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
headers[2] = TLP_CFG_DW2(bus, devfn, where);
- tlp_write_packet(pcie, headers, 0, false);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
- return tlp_read_packet(pcie, value);
+ return pcie->pcie_data->tlp_read_pkt(pcie, value);
}
static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
@@ -236,11 +336,11 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
/* check alignment to Qword */
if ((where & 0x7) == 0)
- tlp_write_packet(pcie, headers, value, true);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, value, true);
else
- tlp_write_packet(pcie, headers, value, false);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, value, false);
- ret = tlp_read_packet(pcie, NULL);
+ ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
@@ -254,6 +354,53 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
return PCIBIOS_SUCCESSFUL;
}
+static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
+ int size, u32 *value)
+{
+ void *addr = S10_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ *value = readb(addr);
+ break;
+ case 2:
+ *value = readw(addr);
+ break;
+ default:
+ *value = readl(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 bus, int where,
+ int size, u32 value)
+{
+ void *addr = S10_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ writeb(value, addr);
+ break;
+ case 2:
+ writew(value, addr);
+ break;
+ default:
+ writel(value, addr);
+ break;
+ }
+
+ /*
+ * Monitor changes to PCI_PRIMARY_BUS register on root port
+ * and update local copy of root bus number accordingly.
+ */
+ if (bus == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
+ pcie->root_bus_nr = value & 0xff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
unsigned int devfn, int where, int size,
u32 *value)
@@ -262,6 +409,9 @@ static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
u32 data;
u8 byte_en;
+ if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_read_cfg)
+ return pcie->pcie_data->rp_read_cfg(pcie, where, size, value);
+
switch (size) {
case 1:
byte_en = 1 << (where & 3);
@@ -302,6 +452,10 @@ static int _altera_pcie_cfg_write(struct altera_pcie *pcie, u8 busno,
u32 shift = 8 * (where & 3);
u8 byte_en;
+ if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_write_cfg)
+ return pcie->pcie_data->rp_write_cfg(pcie, busno, where,
+ size, value);
+
switch (size) {
case 1:
data32 = (value & 0xff) << shift;
@@ -365,7 +519,8 @@ static int altera_read_cap_word(struct altera_pcie *pcie, u8 busno,
int ret;
ret = _altera_pcie_cfg_read(pcie, busno, devfn,
- PCIE_CAP_OFFSET + offset, sizeof(*value),
+ pcie->pcie_data->cap_offset + offset,
+ sizeof(*value),
&data);
*value = data;
return ret;
@@ -375,7 +530,8 @@ static int altera_write_cap_word(struct altera_pcie *pcie, u8 busno,
unsigned int devfn, int offset, u16 value)
{
return _altera_pcie_cfg_write(pcie, busno, devfn,
- PCIE_CAP_OFFSET + offset, sizeof(value),
+ pcie->pcie_data->cap_offset + offset,
+ sizeof(value),
value);
}
@@ -403,7 +559,7 @@ static void altera_wait_link_retrain(struct altera_pcie *pcie)
/* Wait for link is up */
start_jiffies = jiffies;
for (;;) {
- if (altera_pcie_link_up(pcie))
+ if (pcie->pcie_data->get_link_status(pcie))
break;
if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) {
@@ -418,7 +574,7 @@ static void altera_pcie_retrain(struct altera_pcie *pcie)
{
u16 linkcap, linkstat, linkctl;
- if (!altera_pcie_link_up(pcie))
+ if (!pcie->pcie_data->get_link_status(pcie))
return;
/*
@@ -540,12 +696,20 @@ static int altera_pcie_parse_dt(struct altera_pcie *pcie)
struct device *dev = &pcie->pdev->dev;
struct platform_device *pdev = pcie->pdev;
struct resource *cra;
+ struct resource *hip;
cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Cra");
pcie->cra_base = devm_ioremap_resource(dev, cra);
if (IS_ERR(pcie->cra_base))
return PTR_ERR(pcie->cra_base);
+ if (pcie->pcie_data->version == ALTERA_PCIE_V2) {
+ hip = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Hip");
+ pcie->hip_base = devm_ioremap_resource(&pdev->dev, hip);
+ if (IS_ERR(pcie->hip_base))
+ return PTR_ERR(pcie->hip_base);
+ }
+
/* setup IRQ */
pcie->irq = platform_get_irq(pdev, 0);
if (pcie->irq < 0) {
@@ -562,6 +726,38 @@ static void altera_pcie_host_init(struct altera_pcie *pcie)
altera_pcie_retrain(pcie);
}
+static struct altera_pcie_data pci_1_0_data = {
+ .tlp_read_pkt = tlp_read_packet,
+ .tlp_write_pkt = tlp_write_packet,
+ .get_link_status = altera_pcie_link_up,
+ .cap_offset = 0x80,
+ .version = ALTERA_PCIE_V1,
+ .cfgrd0 = TLP_FMTTYPE_CFGRD0,
+ .cfgrd1 = TLP_FMTTYPE_CFGRD1,
+ .cfgwr0 = TLP_FMTTYPE_CFGWR0,
+ .cfgwr1 = TLP_FMTTYPE_CFGWR1,
+};
+
+static struct altera_pcie_data pci_2_0_data = {
+ .tlp_read_pkt = s10_tlp_read_packet,
+ .tlp_write_pkt = s10_tlp_write_packet,
+ .get_link_status = s10_altera_pcie_link_up,
+ .rp_read_cfg = s10_rp_read_cfg,
+ .rp_write_cfg = s10_rp_write_cfg,
+ .version = ALTERA_PCIE_V2,
+ .cap_offset = 0x70,
+ .cfgrd0 = S10_TLP_FMTTYPE_CFGRD0,
+ .cfgrd1 = S10_TLP_FMTTYPE_CFGRD1,
+ .cfgwr0 = S10_TLP_FMTTYPE_CFGWR0,
+ .cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
+};
+
+static const struct of_device_id altera_pcie_of_match[] = {
+ { .compatible = "altr,pcie-root-port-1.0", .data = &pci_1_0_data },
+ { .compatible = "altr,pcie-root-port-2.0", .data = &pci_2_0_data },
+ {},
+};
+
static int altera_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -570,6 +766,7 @@ static int altera_pcie_probe(struct platform_device *pdev)
struct pci_bus *child;
struct pci_host_bridge *bridge;
int ret;
+ const struct of_device_id *match;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
if (!bridge)
@@ -578,6 +775,12 @@ static int altera_pcie_probe(struct platform_device *pdev)
pcie = pci_host_bridge_priv(bridge);
pcie->pdev = pdev;
+ match = of_match_device(altera_pcie_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ pcie->pcie_data = match->data;
+
ret = altera_pcie_parse_dt(pcie);
if (ret) {
dev_err(dev, "Parsing DT failed\n");
@@ -628,11 +831,6 @@ static int altera_pcie_probe(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id altera_pcie_of_match[] = {
- { .compatible = "altr,pcie-root-port-1.0", },
- {},
-};
-
static struct platform_driver altera_pcie_driver = {
.probe = altera_pcie_probe,
.driver = {
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 2/3] PCI: altera: Enable driver on ARM64
2019-02-14 15:20 [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
@ 2019-02-14 15:20 ` Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 Ley Foon Tan
2 siblings, 0 replies; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-14 15:20 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi
Cc: linux-kernel, linux-pci, devicetree, lftan.linux, Ley Foon Tan
Enable PCIE_ALTERA on ARM64 platform.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
---
drivers/pci/controller/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 6671946..6012f30 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -175,7 +175,7 @@ config PCIE_IPROC_MSI
config PCIE_ALTERA
bool "Altera PCIe controller"
- depends on ARM || NIOS2 || COMPILE_TEST
+ depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
help
Say Y here if you want to enable PCIe controller support on Altera
FPGA.
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
2019-02-14 15:20 [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 2/3] PCI: altera: Enable driver on ARM64 Ley Foon Tan
@ 2019-02-14 15:20 ` Ley Foon Tan
2 siblings, 0 replies; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-14 15:20 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi
Cc: linux-kernel, linux-pci, devicetree, lftan.linux, Ley Foon Tan
Add support for altr,pcie-root-port-2.0.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/pci/altera-pcie.txt | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 6c396f1..816b244 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -1,11 +1,13 @@
* Altera PCIe controller
Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0"
+- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and length.
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
@ 2019-02-19 16:23 ` Lorenzo Pieralisi
2019-02-25 9:35 ` Ley Foon Tan
0 siblings, 1 reply; 7+ messages in thread
From: Lorenzo Pieralisi @ 2019-02-19 16:23 UTC (permalink / raw)
To: Ley Foon Tan
Cc: Bjorn Helgaas, linux-kernel, linux-pci, devicetree, lftan.linux
On Thu, Feb 14, 2019 at 11:20:36PM +0800, Ley Foon Tan wrote:
> Add PCIe Root Port support for Stratix 10 device.
>
> Main differences:
Main differences with what ? We need to rewrite this commit log.
> - HIP interface to access Root Port configuration register.
> - TLP programming flow:
> - One REG0 register
> - Don't need to check alignment
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> ---
> drivers/pci/controller/pcie-altera.c | 246 ++++++++++++++++++++++++++++++----
> 1 files changed, 222 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
> index 7d05e51..76bb6a6 100644
> --- a/drivers/pci/controller/pcie-altera.c
> +++ b/drivers/pci/controller/pcie-altera.c
> @@ -11,6 +11,7 @@
> #include <linux/irqchip/chained_irq.h>
> #include <linux/init.h>
> #include <linux/of_address.h>
> +#include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/of_pci.h>
> #include <linux/pci.h>
> @@ -37,7 +38,12 @@
> #define RP_LTSSM_MASK 0x1f
> #define LTSSM_L0 0xf
>
> -#define PCIE_CAP_OFFSET 0x80
> +#define S10_RP_TX_CNTRL 0x2004
> +#define S10_RP_RXCPL_REG 0x2008
> +#define S10_RP_RXCPL_STATUS 0x200C
> +#define S10_RP_CFG_ADDR(pcie, reg) \
> + (((pcie)->hip_base) + (reg) + (1 << 20))
> +
> /* TLP configuration type 0 and 1 */
> #define TLP_FMTTYPE_CFGRD0 0x04 /* Configuration Read Type 0 */
> #define TLP_FMTTYPE_CFGWR0 0x44 /* Configuration Write Type 0 */
> @@ -49,18 +55,19 @@
> #define RP_DEVFN 0
> #define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn))
> #define TLP_CFGRD_DW0(pcie, bus) \
> - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0 \
> - : TLP_FMTTYPE_CFGRD1) << 24) | \
> - TLP_PAYLOAD_SIZE)
> + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0 \
> + : pcie->pcie_data->cfgrd1) << 24) | \
> + TLP_PAYLOAD_SIZE)
> #define TLP_CFGWR_DW0(pcie, bus) \
> - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0 \
> - : TLP_FMTTYPE_CFGWR1) << 24) | \
> - TLP_PAYLOAD_SIZE)
> + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0 \
> + : pcie->pcie_data->cfgwr1) << 24) | \
> + TLP_PAYLOAD_SIZE)
> #define TLP_CFG_DW1(pcie, tag, be) \
> - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
> + (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
> #define TLP_CFG_DW2(bus, devfn, offset) \
> (((bus) << 24) | ((devfn) << 16) | (offset))
> #define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
> +#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
> #define TLP_HDR_SIZE 3
> #define TLP_LOOP 500
>
> @@ -69,14 +76,43 @@
>
> #define DWORD_MASK 3
>
> +#define S10_TLP_FMTTYPE_CFGRD0 0x05
> +#define S10_TLP_FMTTYPE_CFGRD1 0x04
> +#define S10_TLP_FMTTYPE_CFGWR0 0x45
> +#define S10_TLP_FMTTYPE_CFGWR1 0x44
> +
> +enum altera_pcie_version {
> + ALTERA_PCIE_V1 = 0,
> + ALTERA_PCIE_V2,
> +};
> +
> struct altera_pcie {
> struct platform_device *pdev;
> - void __iomem *cra_base; /* DT Cra */
> + void __iomem *cra_base;
> + void __iomem *hip_base;
> int irq;
> u8 root_bus_nr;
> struct irq_domain *irq_domain;
> struct resource bus_range;
> struct list_head resources;
> + const struct altera_pcie_data *pcie_data;
> +};
> +
> +struct altera_pcie_data {
> + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32 *headers,
> + u32 data, bool align);
> + bool (*get_link_status)(struct altera_pcie *pcie);
> + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> + int size, u32 *value);
> + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int where,
> + int size, u32 value);
> + enum altera_pcie_version version;
> + u32 cap_offset; /* PCIe capability structure register offset */
This is a duplication of struct pci_dev.pcie_cap right ?
> + u32 cfgrd0;
> + u32 cfgrd1;
> + u32 cfgwr0;
> + u32 cfgwr1;
> };
>
> struct tlp_rp_regpair_t {
> @@ -101,6 +137,15 @@ static bool altera_pcie_link_up(struct altera_pcie *pcie)
> return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
> }
>
> +static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
> +{
> + void __iomem *addr = S10_RP_CFG_ADDR(pcie,
> + pcie->pcie_data->cap_offset +
> + PCI_EXP_LNKSTA);
> +
> + return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
> +}
> +
> /*
> * Altera PCIe port uses BAR0 of RC's configuration space as the translation
> * from PCI bus to native BUS. Entire DDR region is mapped into PCIe space
> @@ -128,12 +173,18 @@ static void tlp_write_tx(struct altera_pcie *pcie,
> cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
> }
>
> +static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0, u32 ctrl)
> +{
> + cra_writel(pcie, reg0, RP_TX_REG0);
> + cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
> +}
> +
> static bool altera_pcie_valid_device(struct altera_pcie *pcie,
> struct pci_bus *bus, int dev)
> {
> /* If there is no link, then there is no device */
> if (bus->number != pcie->root_bus_nr) {
> - if (!altera_pcie_link_up(pcie))
> + if (!pcie->pcie_data->get_link_status(pcie))
> return false;
> }
>
> @@ -183,6 +234,46 @@ static int tlp_read_packet(struct altera_pcie *pcie, u32 *value)
> return PCIBIOS_DEVICE_NOT_FOUND;
> }
>
> +static int s10_tlp_read_packet(struct altera_pcie *pcie, u32 *value)
> +{
> + int i;
> + u32 ctrl;
> + u32 comp_status;
> + u32 dw[4];
> + u32 count = 0;
> +
> + for (i = 0; i < TLP_LOOP; i++) {
> + ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
> + if (!(ctrl & RP_RXCPL_SOP))
> + continue;
> +
> + /* Read first DW */
> + dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
> +
> + /* Poll for EOP */
> + for (i = 0; i < TLP_LOOP; i++) {
> + ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
> + dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
I think you'd better add a check on count lest it can overflow dw[].
> + if (ctrl & RP_RXCPL_EOP) {
> + comp_status = TLP_COMP_STATUS(dw[1]);
> + if (comp_status)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + if (value &&
> + TLP_BYTE_COUNT(dw[1]) == sizeof(u32) &&
> + count >= 3)
> + *value = dw[3];
> +
> + return PCIBIOS_SUCCESSFUL;
> + }
> + }
> +
> + udelay(5);
> + }
> +
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
> u32 data, bool align)
> {
> @@ -210,6 +301,15 @@ static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
> tlp_write_tx(pcie, &tlp_rp_regdata);
> }
>
> +static void s10_tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
> + u32 data, bool dummy)
> +{
> + s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
> + s10_tlp_write_tx(pcie, headers[1], 0);
> + s10_tlp_write_tx(pcie, headers[2], 0);
> + s10_tlp_write_tx(pcie, data, RP_TX_EOP);
> +}
> +
> static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
> int where, u8 byte_en, u32 *value)
> {
> @@ -219,9 +319,9 @@ static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
> headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
> headers[2] = TLP_CFG_DW2(bus, devfn, where);
>
> - tlp_write_packet(pcie, headers, 0, false);
> + pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
>
> - return tlp_read_packet(pcie, value);
> + return pcie->pcie_data->tlp_read_pkt(pcie, value);
> }
>
> static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
> @@ -236,11 +336,11 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
>
> /* check alignment to Qword */
> if ((where & 0x7) == 0)
> - tlp_write_packet(pcie, headers, value, true);
> + pcie->pcie_data->tlp_write_pkt(pcie, headers, value, true);
> else
> - tlp_write_packet(pcie, headers, value, false);
> + pcie->pcie_data->tlp_write_pkt(pcie, headers, value, false);
>
> - ret = tlp_read_packet(pcie, NULL);
> + ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
> if (ret != PCIBIOS_SUCCESSFUL)
> return ret;
>
> @@ -254,6 +354,53 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
> return PCIBIOS_SUCCESSFUL;
> }
>
> +static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
> + int size, u32 *value)
> +{
> + void *addr = S10_RP_CFG_ADDR(pcie, where);
> +
> + switch (size) {
> + case 1:
> + *value = readb(addr);
> + break;
> + case 2:
> + *value = readw(addr);
> + break;
> + default:
> + *value = readl(addr);
> + break;
> + }
This boilerplace could be avoided if you used generic config
accessors (ie pci_generic_config_read()/write()).
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 bus, int where,
> + int size, u32 value)
> +{
> + void *addr = S10_RP_CFG_ADDR(pcie, where);
> +
> + switch (size) {
> + case 1:
> + writeb(value, addr);
> + break;
> + case 2:
> + writew(value, addr);
> + break;
> + default:
> + writel(value, addr);
> + break;
> + }
Ditto.
> +
> + /*
> + * Monitor changes to PCI_PRIMARY_BUS register on root port
> + * and update local copy of root bus number accordingly.
> + */
> + if (bus == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
> + pcie->root_bus_nr = value & 0xff;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
> unsigned int devfn, int where, int size,
> u32 *value)
> @@ -262,6 +409,9 @@ static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
> u32 data;
> u8 byte_en;
>
> + if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_read_cfg)
> + return pcie->pcie_data->rp_read_cfg(pcie, where, size, value);
> +
> switch (size) {
> case 1:
> byte_en = 1 << (where & 3);
> @@ -302,6 +452,10 @@ static int _altera_pcie_cfg_write(struct altera_pcie *pcie, u8 busno,
> u32 shift = 8 * (where & 3);
> u8 byte_en;
>
> + if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_write_cfg)
> + return pcie->pcie_data->rp_write_cfg(pcie, busno, where,
> + size, value);
> +
> switch (size) {
> case 1:
> data32 = (value & 0xff) << shift;
> @@ -365,7 +519,8 @@ static int altera_read_cap_word(struct altera_pcie *pcie, u8 busno,
> int ret;
>
> ret = _altera_pcie_cfg_read(pcie, busno, devfn,
> - PCIE_CAP_OFFSET + offset, sizeof(*value),
> + pcie->pcie_data->cap_offset + offset,
> + sizeof(*value),
> &data);
> *value = data;
> return ret;
> @@ -375,7 +530,8 @@ static int altera_write_cap_word(struct altera_pcie *pcie, u8 busno,
> unsigned int devfn, int offset, u16 value)
> {
> return _altera_pcie_cfg_write(pcie, busno, devfn,
> - PCIE_CAP_OFFSET + offset, sizeof(value),
> + pcie->pcie_data->cap_offset + offset,
> + sizeof(value),
> value);
> }
>
> @@ -403,7 +559,7 @@ static void altera_wait_link_retrain(struct altera_pcie *pcie)
> /* Wait for link is up */
> start_jiffies = jiffies;
> for (;;) {
> - if (altera_pcie_link_up(pcie))
> + if (pcie->pcie_data->get_link_status(pcie))
> break;
>
> if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) {
> @@ -418,7 +574,7 @@ static void altera_pcie_retrain(struct altera_pcie *pcie)
> {
> u16 linkcap, linkstat, linkctl;
>
> - if (!altera_pcie_link_up(pcie))
> + if (!pcie->pcie_data->get_link_status(pcie))
> return;
>
> /*
> @@ -540,12 +696,20 @@ static int altera_pcie_parse_dt(struct altera_pcie *pcie)
> struct device *dev = &pcie->pdev->dev;
> struct platform_device *pdev = pcie->pdev;
> struct resource *cra;
> + struct resource *hip;
>
> cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Cra");
> pcie->cra_base = devm_ioremap_resource(dev, cra);
> if (IS_ERR(pcie->cra_base))
> return PTR_ERR(pcie->cra_base);
>
> + if (pcie->pcie_data->version == ALTERA_PCIE_V2) {
> + hip = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Hip");
> + pcie->hip_base = devm_ioremap_resource(&pdev->dev, hip);
> + if (IS_ERR(pcie->hip_base))
> + return PTR_ERR(pcie->hip_base);
> + }
> +
> /* setup IRQ */
> pcie->irq = platform_get_irq(pdev, 0);
> if (pcie->irq < 0) {
> @@ -562,6 +726,38 @@ static void altera_pcie_host_init(struct altera_pcie *pcie)
> altera_pcie_retrain(pcie);
> }
>
> +static struct altera_pcie_data pci_1_0_data = {
> + .tlp_read_pkt = tlp_read_packet,
> + .tlp_write_pkt = tlp_write_packet,
> + .get_link_status = altera_pcie_link_up,
> + .cap_offset = 0x80,
> + .version = ALTERA_PCIE_V1,
> + .cfgrd0 = TLP_FMTTYPE_CFGRD0,
> + .cfgrd1 = TLP_FMTTYPE_CFGRD1,
> + .cfgwr0 = TLP_FMTTYPE_CFGWR0,
> + .cfgwr1 = TLP_FMTTYPE_CFGWR1,
> +};
> +
> +static struct altera_pcie_data pci_2_0_data = {
> + .tlp_read_pkt = s10_tlp_read_packet,
> + .tlp_write_pkt = s10_tlp_write_packet,
> + .get_link_status = s10_altera_pcie_link_up,
> + .rp_read_cfg = s10_rp_read_cfg,
> + .rp_write_cfg = s10_rp_write_cfg,
> + .version = ALTERA_PCIE_V2,
> + .cap_offset = 0x70,
> + .cfgrd0 = S10_TLP_FMTTYPE_CFGRD0,
> + .cfgrd1 = S10_TLP_FMTTYPE_CFGRD1,
> + .cfgwr0 = S10_TLP_FMTTYPE_CFGWR0,
> + .cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
> +};
I wonder if it is not better to have two different struct pci_ops (and
have a pointer to them in struct altera_pcie_data) instead of all these
parameters (most of which are there to differentiate struct pci_ops
methods).
See also my comments above.
In the end I guess it depends on how many host bridges will be based on
this IP as design, what you did is OK but it is worth thinking about it.
Lorenzo
> +
> +static const struct of_device_id altera_pcie_of_match[] = {
> + { .compatible = "altr,pcie-root-port-1.0", .data = &pci_1_0_data },
> + { .compatible = "altr,pcie-root-port-2.0", .data = &pci_2_0_data },
> + {},
> +};
> +
> static int altera_pcie_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -570,6 +766,7 @@ static int altera_pcie_probe(struct platform_device *pdev)
> struct pci_bus *child;
> struct pci_host_bridge *bridge;
> int ret;
> + const struct of_device_id *match;
>
> bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
> if (!bridge)
> @@ -578,6 +775,12 @@ static int altera_pcie_probe(struct platform_device *pdev)
> pcie = pci_host_bridge_priv(bridge);
> pcie->pdev = pdev;
>
> + match = of_match_device(altera_pcie_of_match, &pdev->dev);
> + if (!match)
> + return -ENODEV;
> +
> + pcie->pcie_data = match->data;
> +
> ret = altera_pcie_parse_dt(pcie);
> if (ret) {
> dev_err(dev, "Parsing DT failed\n");
> @@ -628,11 +831,6 @@ static int altera_pcie_probe(struct platform_device *pdev)
> return ret;
> }
>
> -static const struct of_device_id altera_pcie_of_match[] = {
> - { .compatible = "altr,pcie-root-port-1.0", },
> - {},
> -};
> -
> static struct platform_driver altera_pcie_driver = {
> .probe = altera_pcie_probe,
> .driver = {
> --
> 1.7.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support
2019-02-19 16:23 ` Lorenzo Pieralisi
@ 2019-02-25 9:35 ` Ley Foon Tan
2019-02-26 7:07 ` Ley Foon Tan
0 siblings, 1 reply; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-25 9:35 UTC (permalink / raw)
To: Lorenzo Pieralisi
Cc: Bjorn Helgaas, linux-kernel, linux-pci, devicetree, lftan.linux
On Tue, 2019-02-19 at 16:23 +0000, Lorenzo Pieralisi wrote:
> On Thu, Feb 14, 2019 at 11:20:36PM +0800, Ley Foon Tan wrote:
> >
> > Add PCIe Root Port support for Stratix 10 device.
> >
> > Main differences:
> Main differences with what ? We need to rewrite this commit log.
Differences compare with Cyclone V and Arria 10 devices.
I will rewrite this.
>
> >
> > - HIP interface to access Root Port configuration register.
> > - TLP programming flow:
> > - One REG0 register
> > - Don't need to check alignment
> >
> > Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> > ---
> > drivers/pci/controller/pcie-altera.c | 246
> > ++++++++++++++++++++++++++++++----
> > 1 files changed, 222 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-altera.c
> > b/drivers/pci/controller/pcie-altera.c
> > index 7d05e51..76bb6a6 100644
> > --- a/drivers/pci/controller/pcie-altera.c
> > +++ b/drivers/pci/controller/pcie-altera.c
> > @@ -11,6 +11,7 @@
> > #include <linux/irqchip/chained_irq.h>
> > #include <linux/init.h>
> > #include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > #include <linux/of_irq.h>
> > #include <linux/of_pci.h>
> > #include <linux/pci.h>
> > @@ -37,7 +38,12 @@
> > #define RP_LTSSM_MASK 0x1f
> > #define LTSSM_L0 0xf
> >
> > -#define PCIE_CAP_OFFSET 0x80
> > +#define S10_RP_TX_CNTRL 0x2004
> > +#define S10_RP_RXCPL_REG 0x2008
> > +#define S10_RP_RXCPL_STATUS 0x200C
> > +#define S10_RP_CFG_ADDR(pcie, reg) \
> > + (((pcie)->hip_base) + (reg) + (1 << 20))
> > +
> > /* TLP configuration type 0 and 1 */
> > #define TLP_FMTTYPE_CFGRD0 0x04 /*
> > Configuration Read Type 0 */
> > #define TLP_FMTTYPE_CFGWR0 0x44 /*
> > Configuration Write Type 0 */
> > @@ -49,18 +55,19 @@
> > #define RP_DEVFN 0
> > #define TLP_REQ_ID(bus, devfn) (((bus) << 8) |
> > (devfn))
> > #define TLP_CFGRD_DW0(pcie, bus)
> > \
> > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0
> > \
> > - : TLP_FMTTYPE_CFGRD1) << 24) |
> > \
> > - TLP_PAYLOAD_SIZE)
> > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0
> > \
> > + : pcie->pcie_data->cfgrd1) << 24)
> > | \
> > + TLP_PAYLOAD_SIZE)
> > #define TLP_CFGWR_DW0(pcie, bus)
> > \
> > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0
> > \
> > - : TLP_FMTTYPE_CFGWR1) << 24) |
> > \
> > - TLP_PAYLOAD_SIZE)
> > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0
> > \
> > + : pcie->pcie_data->cfgwr1) << 24)
> > | \
> > + TLP_PAYLOAD_SIZE)
> > #define TLP_CFG_DW1(pcie, tag, be) \
> > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag <<
> > 8) | (be))
> > + (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag
> > << 8) | (be))
> > #define TLP_CFG_DW2(bus, devfn, offset) \
> > (((bus) << 24) | ((devfn) << 16) |
> > (offset))
> > #define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
> > +#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
> > #define TLP_HDR_SIZE 3
> > #define TLP_LOOP 500
> >
> > @@ -69,14 +76,43 @@
> >
> > #define DWORD_MASK 3
> >
> > +#define S10_TLP_FMTTYPE_CFGRD0 0x05
> > +#define S10_TLP_FMTTYPE_CFGRD1 0x04
> > +#define S10_TLP_FMTTYPE_CFGWR0 0x45
> > +#define S10_TLP_FMTTYPE_CFGWR1 0x44
> > +
> > +enum altera_pcie_version {
> > + ALTERA_PCIE_V1 = 0,
> > + ALTERA_PCIE_V2,
> > +};
> > +
> > struct altera_pcie {
> > struct platform_device *pdev;
> > - void __iomem *cra_base; /* DT Cra */
> > + void __iomem *cra_base;
> > + void __iomem *hip_base;
> > int irq;
> > u8 root_bus_nr;
> > struct irq_domain *irq_domain;
> > struct resource bus_range;
> > struct list_head resources;
> > + const struct altera_pcie_data *pcie_data;
> > +};
> > +
> > +struct altera_pcie_data {
> > + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> > + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool align);
> > + bool (*get_link_status)(struct altera_pcie *pcie);
> > + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> > + int size, u32 *value);
> > + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value);
> > + enum altera_pcie_version version;
> > + u32 cap_offset; /* PCIe capability
> > structure register offset */
> This is a duplication of struct pci_dev.pcie_cap right ?
This is register offset in PCIe Rootport IP to access PCIe Cap
structure register of directly RP. This allow us to access PCIe cap
struct register without pci_dev.
>
> >
> > + u32 cfgrd0;
> > + u32 cfgrd1;
> > + u32 cfgwr0;
> > + u32 cfgwr1;
> > };
> >
> > struct tlp_rp_regpair_t {
> > @@ -101,6 +137,15 @@ static bool altera_pcie_link_up(struct
> > altera_pcie *pcie)
> > return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) ==
> > LTSSM_L0);
> > }
> >
> > +static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
> > +{
> > + void __iomem *addr = S10_RP_CFG_ADDR(pcie,
> > + pcie->pcie_data->cap_offset +
> > + PCI_EXP_LNKSTA);
> > +
> > + return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
> > +}
> > +
> > /*
> > * Altera PCIe port uses BAR0 of RC's configuration space as the
> > translation
> > * from PCI bus to native BUS. Entire DDR region is mapped into
> > PCIe space
> > @@ -128,12 +173,18 @@ static void tlp_write_tx(struct altera_pcie
> > *pcie,
> > cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
> > }
> >
> > +static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0,
> > u32 ctrl)
> > +{
> > + cra_writel(pcie, reg0, RP_TX_REG0);
> > + cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
> > +}
> > +
> > static bool altera_pcie_valid_device(struct altera_pcie *pcie,
> > struct pci_bus *bus, int dev)
> > {
> > /* If there is no link, then there is no device */
> > if (bus->number != pcie->root_bus_nr) {
> > - if (!altera_pcie_link_up(pcie))
> > + if (!pcie->pcie_data->get_link_status(pcie))
> > return false;
> > }
> >
> > @@ -183,6 +234,46 @@ static int tlp_read_packet(struct altera_pcie
> > *pcie, u32 *value)
> > return PCIBIOS_DEVICE_NOT_FOUND;
> > }
> >
> > +static int s10_tlp_read_packet(struct altera_pcie *pcie, u32
> > *value)
> > +{
> > + int i;
> > + u32 ctrl;
> > + u32 comp_status;
> > + u32 dw[4];
> > + u32 count = 0;
> > +
> > + for (i = 0; i < TLP_LOOP; i++) {
> > + ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
> > + if (!(ctrl & RP_RXCPL_SOP))
> > + continue;
> > +
> > + /* Read first DW */
> > + dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
> > +
> > + /* Poll for EOP */
> > + for (i = 0; i < TLP_LOOP; i++) {
> > + ctrl = cra_readl(pcie,
> > S10_RP_RXCPL_STATUS);
> > + dw[count++] = cra_readl(pcie,
> > S10_RP_RXCPL_REG);
> I think you'd better add a check on count lest it can overflow dw[].
Okay, will check that.
>
> >
> > + if (ctrl & RP_RXCPL_EOP) {
> > + comp_status =
> > TLP_COMP_STATUS(dw[1]);
> > + if (comp_status)
> > + return
> > PCIBIOS_DEVICE_NOT_FOUND;
> > +
> > + if (value &&
> > + TLP_BYTE_COUNT(dw[1]) ==
> > sizeof(u32) &&
> > + count >= 3)
> > + *value = dw[3];
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > + }
> > + }
> > +
> > + udelay(5);
> > + }
> > +
> > + return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > static void tlp_write_packet(struct altera_pcie *pcie, u32
> > *headers,
> > u32 data, bool align)
> > {
> > @@ -210,6 +301,15 @@ static void tlp_write_packet(struct
> > altera_pcie *pcie, u32 *headers,
> > tlp_write_tx(pcie, &tlp_rp_regdata);
> > }
> >
> > +static void s10_tlp_write_packet(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool dummy)
> > +{
> > + s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
> > + s10_tlp_write_tx(pcie, headers[1], 0);
> > + s10_tlp_write_tx(pcie, headers[2], 0);
> > + s10_tlp_write_tx(pcie, data, RP_TX_EOP);
> > +}
> > +
> > static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus,
> > u32 devfn,
> > int where, u8 byte_en, u32 *value)
> > {
> > @@ -219,9 +319,9 @@ static int tlp_cfg_dword_read(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> > headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
> > headers[2] = TLP_CFG_DW2(bus, devfn, where);
> >
> > - tlp_write_packet(pcie, headers, 0, false);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
> >
> > - return tlp_read_packet(pcie, value);
> > + return pcie->pcie_data->tlp_read_pkt(pcie, value);
> > }
> >
> > static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus,
> > u32 devfn,
> > @@ -236,11 +336,11 @@ static int tlp_cfg_dword_write(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> >
> > /* check alignment to Qword */
> > if ((where & 0x7) == 0)
> > - tlp_write_packet(pcie, headers, value, true);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > value, true);
> > else
> > - tlp_write_packet(pcie, headers, value, false);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > value, false);
> >
> > - ret = tlp_read_packet(pcie, NULL);
> > + ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
> > if (ret != PCIBIOS_SUCCESSFUL)
> > return ret;
> >
> > @@ -254,6 +354,53 @@ static int tlp_cfg_dword_write(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> > return PCIBIOS_SUCCESSFUL;
> > }
> >
> > +static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
> > + int size, u32 *value)
> > +{
> > + void *addr = S10_RP_CFG_ADDR(pcie, where);
> > +
> > + switch (size) {
> > + case 1:
> > + *value = readb(addr);
> > + break;
> > + case 2:
> > + *value = readw(addr);
> > + break;
> > + default:
> > + *value = readl(addr);
> > + break;
> > + }
> This boilerplace could be avoided if you used generic config
> accessors (ie pci_generic_config_read()/write()).
Okay. I will change this.
>
> >
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > +static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value)
> > +{
> > + void *addr = S10_RP_CFG_ADDR(pcie, where);
> > +
> > + switch (size) {
> > + case 1:
> > + writeb(value, addr);
> > + break;
> > + case 2:
> > + writew(value, addr);
> > + break;
> > + default:
> > + writel(value, addr);
> > + break;
> > + }
> Ditto.
Noted.
>
> >
> > +
> > + /*
> > + * Monitor changes to PCI_PRIMARY_BUS register on root
> > port
> > + * and update local copy of root bus number accordingly.
> > + */
> > + if (bus == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
> > + pcie->root_bus_nr = value & 0xff;
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8
> > busno,
> > unsigned int devfn, int where,
> > int size,
> > u32 *value)
> > @@ -262,6 +409,9 @@ static int _altera_pcie_cfg_read(struct
> > altera_pcie *pcie, u8 busno,
> > u32 data;
> > u8 byte_en;
> >
> > + if (busno == pcie->root_bus_nr && pcie->pcie_data-
> > >rp_read_cfg)
> > + return pcie->pcie_data->rp_read_cfg(pcie, where,
> > size, value);
> > +
> > switch (size) {
> > case 1:
> > byte_en = 1 << (where & 3);
> > @@ -302,6 +452,10 @@ static int _altera_pcie_cfg_write(struct
> > altera_pcie *pcie, u8 busno,
> > u32 shift = 8 * (where & 3);
> > u8 byte_en;
> >
> > + if (busno == pcie->root_bus_nr && pcie->pcie_data-
> > >rp_write_cfg)
> > + return pcie->pcie_data->rp_write_cfg(pcie, busno,
> > where,
> > + size,
> > value);
> > +
> > switch (size) {
> > case 1:
> > data32 = (value & 0xff) << shift;
> > @@ -365,7 +519,8 @@ static int altera_read_cap_word(struct
> > altera_pcie *pcie, u8 busno,
> > int ret;
> >
> > ret = _altera_pcie_cfg_read(pcie, busno, devfn,
> > - PCIE_CAP_OFFSET + offset,
> > sizeof(*value),
> > + pcie->pcie_data->cap_offset +
> > offset,
> > + sizeof(*value),
> > &data);
> > *value = data;
> > return ret;
> > @@ -375,7 +530,8 @@ static int altera_write_cap_word(struct
> > altera_pcie *pcie, u8 busno,
> > unsigned int devfn, int offset,
> > u16 value)
> > {
> > return _altera_pcie_cfg_write(pcie, busno, devfn,
> > - PCIE_CAP_OFFSET + offset,
> > sizeof(value),
> > + pcie->pcie_data->cap_offset
> > + offset,
> > + sizeof(value),
> > value);
> > }
> >
> > @@ -403,7 +559,7 @@ static void altera_wait_link_retrain(struct
> > altera_pcie *pcie)
> > /* Wait for link is up */
> > start_jiffies = jiffies;
> > for (;;) {
> > - if (altera_pcie_link_up(pcie))
> > + if (pcie->pcie_data->get_link_status(pcie))
> > break;
> >
> > if (time_after(jiffies, start_jiffies +
> > LINK_UP_TIMEOUT)) {
> > @@ -418,7 +574,7 @@ static void altera_pcie_retrain(struct
> > altera_pcie *pcie)
> > {
> > u16 linkcap, linkstat, linkctl;
> >
> > - if (!altera_pcie_link_up(pcie))
> > + if (!pcie->pcie_data->get_link_status(pcie))
> > return;
> >
> > /*
> > @@ -540,12 +696,20 @@ static int altera_pcie_parse_dt(struct
> > altera_pcie *pcie)
> > struct device *dev = &pcie->pdev->dev;
> > struct platform_device *pdev = pcie->pdev;
> > struct resource *cra;
> > + struct resource *hip;
> >
> > cra = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "Cra");
> > pcie->cra_base = devm_ioremap_resource(dev, cra);
> > if (IS_ERR(pcie->cra_base))
> > return PTR_ERR(pcie->cra_base);
> >
> > + if (pcie->pcie_data->version == ALTERA_PCIE_V2) {
> > + hip = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM, "Hip");
> > + pcie->hip_base = devm_ioremap_resource(&pdev->dev,
> > hip);
> > + if (IS_ERR(pcie->hip_base))
> > + return PTR_ERR(pcie->hip_base);
> > + }
> > +
> > /* setup IRQ */
> > pcie->irq = platform_get_irq(pdev, 0);
> > if (pcie->irq < 0) {
> > @@ -562,6 +726,38 @@ static void altera_pcie_host_init(struct
> > altera_pcie *pcie)
> > altera_pcie_retrain(pcie);
> > }
> >
> > +static struct altera_pcie_data pci_1_0_data = {
> > + .tlp_read_pkt = tlp_read_packet,
> > + .tlp_write_pkt = tlp_write_packet,
> > + .get_link_status = altera_pcie_link_up,
> > + .cap_offset = 0x80,
> > + .version = ALTERA_PCIE_V1,
> > + .cfgrd0 = TLP_FMTTYPE_CFGRD0,
> > + .cfgrd1 = TLP_FMTTYPE_CFGRD1,
> > + .cfgwr0 = TLP_FMTTYPE_CFGWR0,
> > + .cfgwr1 = TLP_FMTTYPE_CFGWR1,
> > +};
> > +
> > +static struct altera_pcie_data pci_2_0_data = {
> > + .tlp_read_pkt = s10_tlp_read_packet,
> > + .tlp_write_pkt = s10_tlp_write_packet,
> > + .get_link_status = s10_altera_pcie_link_up,
> > + .rp_read_cfg = s10_rp_read_cfg,
> > + .rp_write_cfg = s10_rp_write_cfg,
> > + .version = ALTERA_PCIE_V2,
> > + .cap_offset = 0x70,
> > + .cfgrd0 = S10_TLP_FMTTYPE_CFGRD0,
> > + .cfgrd1 = S10_TLP_FMTTYPE_CFGRD1,
> > + .cfgwr0 = S10_TLP_FMTTYPE_CFGWR0,
> > + .cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
> > +};
> I wonder if it is not better to have two different struct pci_ops
> (and
> have a pointer to them in struct altera_pcie_data) instead of all
> these
> parameters (most of which are there to differentiate struct pci_ops
> methods).
>
> See also my comments above.
>
> In the end I guess it depends on how many host bridges will be based
> on
> this IP as design, what you did is OK but it is worth thinking about
> it.
>
We have 2 versions of HW based on this IP as for now. May have new
version in future.
I can move all callback functions to struct pci_ops and have a pointer
in struct altera_pcie_data.
Thanks.
Regards
Ley Foon
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support
2019-02-25 9:35 ` Ley Foon Tan
@ 2019-02-26 7:07 ` Ley Foon Tan
0 siblings, 0 replies; 7+ messages in thread
From: Ley Foon Tan @ 2019-02-26 7:07 UTC (permalink / raw)
To: Ley Foon Tan
Cc: Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel, linux-pci, devicetree
On Mon, Feb 25, 2019 at 5:35 PM Ley Foon Tan <ley.foon.tan@intel.com> wrote:
>
> On Tue, 2019-02-19 at 16:23 +0000, Lorenzo Pieralisi wrote:
> > On Thu, Feb 14, 2019 at 11:20:36PM +0800, Ley Foon Tan wrote:
> > >
> > > Add PCIe Root Port support for Stratix 10 device.
> > >
> > > Main differences:
> > Main differences with what ? We need to rewrite this commit log.
> Differences compare with Cyclone V and Arria 10 devices.
> I will rewrite this.
> >
> > >
> > > - HIP interface to access Root Port configuration register.
> > > - TLP programming flow:
> > > - One REG0 register
> > > - Don't need to check alignment
> > >
> > > Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> > > ---
> > > drivers/pci/controller/pcie-altera.c | 246
> > > ++++++++++++++++++++++++++++++----
> > > 1 files changed, 222 insertions(+), 24 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/pcie-altera.c
> > > b/drivers/pci/controller/pcie-altera.c
> > > index 7d05e51..76bb6a6 100644
> > > --- a/drivers/pci/controller/pcie-altera.c
> > > +++ b/drivers/pci/controller/pcie-altera.c
> > > @@ -11,6 +11,7 @@
> > > #include <linux/irqchip/chained_irq.h>
> > > #include <linux/init.h>
> > > #include <linux/of_address.h>
> > > +#include <linux/of_device.h>
> > > #include <linux/of_irq.h>
> > > #include <linux/of_pci.h>
> > > #include <linux/pci.h>
> > > @@ -37,7 +38,12 @@
> > > #define RP_LTSSM_MASK 0x1f
> > > #define LTSSM_L0 0xf
> > >
> > > -#define PCIE_CAP_OFFSET 0x80
> > > +#define S10_RP_TX_CNTRL 0x2004
> > > +#define S10_RP_RXCPL_REG 0x2008
> > > +#define S10_RP_RXCPL_STATUS 0x200C
> > > +#define S10_RP_CFG_ADDR(pcie, reg) \
> > > + (((pcie)->hip_base) + (reg) + (1 << 20))
> > > +
> > > /* TLP configuration type 0 and 1 */
> > > #define TLP_FMTTYPE_CFGRD0 0x04 /*
> > > Configuration Read Type 0 */
> > > #define TLP_FMTTYPE_CFGWR0 0x44 /*
> > > Configuration Write Type 0 */
> > > @@ -49,18 +55,19 @@
> > > #define RP_DEVFN 0
> > > #define TLP_REQ_ID(bus, devfn) (((bus) << 8) |
> > > (devfn))
> > > #define TLP_CFGRD_DW0(pcie, bus)
> > > \
> > > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0
> > > \
> > > - : TLP_FMTTYPE_CFGRD1) << 24) |
> > > \
> > > - TLP_PAYLOAD_SIZE)
> > > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0
> > > \
> > > + : pcie->pcie_data->cfgrd1) << 24)
> > > | \
> > > + TLP_PAYLOAD_SIZE)
> > > #define TLP_CFGWR_DW0(pcie, bus)
> > > \
> > > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0
> > > \
> > > - : TLP_FMTTYPE_CFGWR1) << 24) |
> > > \
> > > - TLP_PAYLOAD_SIZE)
> > > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0
> > > \
> > > + : pcie->pcie_data->cfgwr1) << 24)
> > > | \
> > > + TLP_PAYLOAD_SIZE)
> > > #define TLP_CFG_DW1(pcie, tag, be) \
> > > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag <<
> > > 8) | (be))
> > > + (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag
> > > << 8) | (be))
> > > #define TLP_CFG_DW2(bus, devfn, offset) \
> > > (((bus) << 24) | ((devfn) << 16) |
> > > (offset))
> > > #define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
> > > +#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
> > > #define TLP_HDR_SIZE 3
> > > #define TLP_LOOP 500
> > >
> > > @@ -69,14 +76,43 @@
> > >
> > > #define DWORD_MASK 3
> > >
> > > +#define S10_TLP_FMTTYPE_CFGRD0 0x05
> > > +#define S10_TLP_FMTTYPE_CFGRD1 0x04
> > > +#define S10_TLP_FMTTYPE_CFGWR0 0x45
> > > +#define S10_TLP_FMTTYPE_CFGWR1 0x44
> > > +
> > > +enum altera_pcie_version {
> > > + ALTERA_PCIE_V1 = 0,
> > > + ALTERA_PCIE_V2,
> > > +};
> > > +
> > > struct altera_pcie {
> > > struct platform_device *pdev;
> > > - void __iomem *cra_base; /* DT Cra */
> > > + void __iomem *cra_base;
> > > + void __iomem *hip_base;
> > > int irq;
> > > u8 root_bus_nr;
> > > struct irq_domain *irq_domain;
> > > struct resource bus_range;
> > > struct list_head resources;
> > > + const struct altera_pcie_data *pcie_data;
> > > +};
> > > +
> > > +struct altera_pcie_data {
> > > + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> > > + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32
> > > *headers,
> > > + u32 data, bool align);
> > > + bool (*get_link_status)(struct altera_pcie *pcie);
> > > + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> > > + int size, u32 *value);
> > > + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int
> > > where,
> > > + int size, u32 value);
> > > + enum altera_pcie_version version;
> > > + u32 cap_offset; /* PCIe capability
> > > structure register offset */
> > This is a duplication of struct pci_dev.pcie_cap right ?
>
> This is register offset in PCIe Rootport IP to access PCIe Cap
> structure register of directly RP. This allow us to access PCIe cap
> struct register without pci_dev.
>
> >
> > >
> > > + u32 cfgrd0;
> > > + u32 cfgrd1;
> > > + u32 cfgwr0;
> > > + u32 cfgwr1;
> > > };
> > >
> > > struct tlp_rp_regpair_t {
> > > @@ -101,6 +137,15 @@ static bool altera_pcie_link_up(struct
> > > altera_pcie *pcie)
> > > return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) ==
> > > LTSSM_L0);
> > > }
> > >
> > > +static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
> > > +{
> > > + void __iomem *addr = S10_RP_CFG_ADDR(pcie,
> > > + pcie->pcie_data->cap_offset +
> > > + PCI_EXP_LNKSTA);
> > > +
> > > + return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
> > > +}
> > > +
> > > /*
> > > * Altera PCIe port uses BAR0 of RC's configuration space as the
> > > translation
> > > * from PCI bus to native BUS. Entire DDR region is mapped into
> > > PCIe space
> > > @@ -128,12 +173,18 @@ static void tlp_write_tx(struct altera_pcie
> > > *pcie,
> > > cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
> > > }
> > >
> > > +static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0,
> > > u32 ctrl)
> > > +{
> > > + cra_writel(pcie, reg0, RP_TX_REG0);
> > > + cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
> > > +}
> > > +
> > > static bool altera_pcie_valid_device(struct altera_pcie *pcie,
> > > struct pci_bus *bus, int dev)
> > > {
> > > /* If there is no link, then there is no device */
> > > if (bus->number != pcie->root_bus_nr) {
> > > - if (!altera_pcie_link_up(pcie))
> > > + if (!pcie->pcie_data->get_link_status(pcie))
> > > return false;
> > > }
> > >
> > > @@ -183,6 +234,46 @@ static int tlp_read_packet(struct altera_pcie
> > > *pcie, u32 *value)
> > > return PCIBIOS_DEVICE_NOT_FOUND;
> > > }
> > >
> > > +static int s10_tlp_read_packet(struct altera_pcie *pcie, u32
> > > *value)
> > > +{
> > > + int i;
> > > + u32 ctrl;
> > > + u32 comp_status;
> > > + u32 dw[4];
> > > + u32 count = 0;
> > > +
> > > + for (i = 0; i < TLP_LOOP; i++) {
> > > + ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
> > > + if (!(ctrl & RP_RXCPL_SOP))
> > > + continue;
> > > +
> > > + /* Read first DW */
> > > + dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
> > > +
> > > + /* Poll for EOP */
> > > + for (i = 0; i < TLP_LOOP; i++) {
> > > + ctrl = cra_readl(pcie,
> > > S10_RP_RXCPL_STATUS);
> > > + dw[count++] = cra_readl(pcie,
> > > S10_RP_RXCPL_REG);
> > I think you'd better add a check on count lest it can overflow dw[].
> Okay, will check that.
> >
> > >
> > > + if (ctrl & RP_RXCPL_EOP) {
> > > + comp_status =
> > > TLP_COMP_STATUS(dw[1]);
> > > + if (comp_status)
> > > + return
> > > PCIBIOS_DEVICE_NOT_FOUND;
> > > +
> > > + if (value &&
> > > + TLP_BYTE_COUNT(dw[1]) ==
> > > sizeof(u32) &&
> > > + count >= 3)
> > > + *value = dw[3];
> > > +
> > > + return PCIBIOS_SUCCESSFUL;
> > > + }
> > > + }
> > > +
> > > + udelay(5);
> > > + }
> > > +
> > > + return PCIBIOS_DEVICE_NOT_FOUND;
> > > +}
> > > +
> > > static void tlp_write_packet(struct altera_pcie *pcie, u32
> > > *headers,
> > > u32 data, bool align)
> > > {
> > > @@ -210,6 +301,15 @@ static void tlp_write_packet(struct
> > > altera_pcie *pcie, u32 *headers,
> > > tlp_write_tx(pcie, &tlp_rp_regdata);
> > > }
> > >
> > > +static void s10_tlp_write_packet(struct altera_pcie *pcie, u32
> > > *headers,
> > > + u32 data, bool dummy)
> > > +{
> > > + s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
> > > + s10_tlp_write_tx(pcie, headers[1], 0);
> > > + s10_tlp_write_tx(pcie, headers[2], 0);
> > > + s10_tlp_write_tx(pcie, data, RP_TX_EOP);
> > > +}
> > > +
> > > static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus,
> > > u32 devfn,
> > > int where, u8 byte_en, u32 *value)
> > > {
> > > @@ -219,9 +319,9 @@ static int tlp_cfg_dword_read(struct
> > > altera_pcie *pcie, u8 bus, u32 devfn,
> > > headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
> > > headers[2] = TLP_CFG_DW2(bus, devfn, where);
> > >
> > > - tlp_write_packet(pcie, headers, 0, false);
> > > + pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
> > >
> > > - return tlp_read_packet(pcie, value);
> > > + return pcie->pcie_data->tlp_read_pkt(pcie, value);
> > > }
> > >
> > > static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus,
> > > u32 devfn,
> > > @@ -236,11 +336,11 @@ static int tlp_cfg_dword_write(struct
> > > altera_pcie *pcie, u8 bus, u32 devfn,
> > >
> > > /* check alignment to Qword */
> > > if ((where & 0x7) == 0)
> > > - tlp_write_packet(pcie, headers, value, true);
> > > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > > value, true);
> > > else
> > > - tlp_write_packet(pcie, headers, value, false);
> > > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > > value, false);
> > >
> > > - ret = tlp_read_packet(pcie, NULL);
> > > + ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
> > > if (ret != PCIBIOS_SUCCESSFUL)
> > > return ret;
> > >
> > > @@ -254,6 +354,53 @@ static int tlp_cfg_dword_write(struct
> > > altera_pcie *pcie, u8 bus, u32 devfn,
> > > return PCIBIOS_SUCCESSFUL;
> > > }
> > >
> > > +static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
> > > + int size, u32 *value)
> > > +{
> > > + void *addr = S10_RP_CFG_ADDR(pcie, where);
> > > +
> > > + switch (size) {
> > > + case 1:
> > > + *value = readb(addr);
> > > + break;
> > > + case 2:
> > > + *value = readw(addr);
> > > + break;
> > > + default:
> > > + *value = readl(addr);
> > > + break;
> > > + }
> > This boilerplace could be avoided if you used generic config
> > accessors (ie pci_generic_config_read()/write()).
> Okay. I will change this.
I just remembered that, we can't use pci_generic_config_read/write()
here because we need access to
Root port PCIe capabilities struct register to retrain PCIe link
before struct pci_bus *bus is available.
pci_generic_config_read/write() function needs struct pci_bus *bus.
Regards
Ley Foon
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-02-26 7:07 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-14 15:20 [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
2019-02-19 16:23 ` Lorenzo Pieralisi
2019-02-25 9:35 ` Ley Foon Tan
2019-02-26 7:07 ` Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 2/3] PCI: altera: Enable driver on ARM64 Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 Ley Foon Tan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).