linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	<linux-pci@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 8/9] PCI: dwc: Remove Keystone specific dw_pcie_host_ops
Date: Thu, 21 Feb 2019 15:45:17 +0530	[thread overview]
Message-ID: <20190221101518.22604-9-kishon@ti.com> (raw)
In-Reply-To: <20190221101518.22604-1-kishon@ti.com>

Now that Keystone started using its own msi_irq_chip, remove
Keystone specific callback functions defined in dw_pcie_host_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 50 ++++++-------------
 drivers/pci/controller/dwc/pcie-designware.h  |  5 --
 2 files changed, 14 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 72cfedce5af1..781735f06dea 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,18 +126,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	u64 msi_target;
 
-	if (pp->ops->get_msi_addr)
-		msi_target = pp->ops->get_msi_addr(pp);
-	else
-		msi_target = (u64)pp->msi_data;
+	msi_target = (u64)pp->msi_data;
 
 	msg->address_lo = lower_32_bits(msi_target);
 	msg->address_hi = upper_32_bits(msi_target);
 
-	if (pp->ops->get_msi_data)
-		msg->data = pp->ops->get_msi_data(pp, data->hwirq);
-	else
-		msg->data = data->hwirq;
+	msg->data = data->hwirq;
 
 	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
 		(int)data->hwirq, msg->address_hi, msg->address_lo);
@@ -157,17 +151,13 @@ static void dw_pci_bottom_mask(struct irq_data *data)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_clear_irq) {
-		pp->ops->msi_clear_irq(pp, data->hwirq);
-	} else {
-		ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_status[ctrl] &= ~(1 << bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    ~pp->irq_status[ctrl]);
-	}
+	pp->irq_status[ctrl] &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    ~pp->irq_status[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -180,17 +170,13 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_set_irq) {
-		pp->ops->msi_set_irq(pp, data->hwirq);
-	} else {
-		ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_status[ctrl] |= 1 << bit;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    ~pp->irq_status[ctrl]);
-	}
+	pp->irq_status[ctrl] |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    ~pp->irq_status[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -199,20 +185,12 @@ static void dw_pci_bottom_ack(struct irq_data *d)
 {
 	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
 	unsigned int res, bit, ctrl;
-	unsigned long flags;
 
 	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
 	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
 	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-	raw_spin_lock_irqsave(&pp->lock, flags);
-
 	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit);
-
-	if (pp->ops->msi_irq_ack)
-		pp->ops->msi_irq_ack(d->hwirq, pp);
-
-	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
 static struct irq_chip dw_pci_msi_bottom_irq_chip = {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index cb6eeb062f47..ac75cde80a0c 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -142,14 +142,9 @@ struct dw_pcie_host_ops {
 	int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
 			     unsigned int devfn, int where, int size, u32 val);
 	int (*host_init)(struct pcie_port *pp);
-	void (*msi_set_irq)(struct pcie_port *pp, int irq);
-	void (*msi_clear_irq)(struct pcie_port *pp, int irq);
-	phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
-	u32 (*get_msi_data)(struct pcie_port *pp, int pos);
 	void (*scan_bus)(struct pcie_port *pp);
 	void (*set_num_vectors)(struct pcie_port *pp);
 	int (*msi_host_init)(struct pcie_port *pp);
-	void (*msi_irq_ack)(int irq, struct pcie_port *pp);
 };
 
 struct pcie_port {
-- 
2.17.1


  parent reply	other threads:[~2019-02-21 10:20 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-21 10:15 [PATCH v4 0/9] PCI: DWC/Keystone: MSI configuration cleanup Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 1/9] PCI: keystone: Cleanup interrupt related macros Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 2/9] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 3/9] PCI: keystone: Convert to using hierarchy domain for legacy interrupts Kishon Vijay Abraham I
2019-02-21 16:24   ` Lorenzo Pieralisi
2019-02-23 12:11     ` Marc Zyngier
2019-03-07  9:12       ` Kishon Vijay Abraham I
2019-03-07 12:02         ` Marc Zyngier
2019-03-18  5:33           ` Kishon Vijay Abraham I
2019-03-18 11:16             ` Marc Zyngier
2019-03-19 10:52               ` Kishon Vijay Abraham I
2019-03-19 11:35                 ` Marc Zyngier
2019-02-21 10:15 ` [PATCH v4 4/9] PCI: keystone: Use hwirq to get the MSI IRQ number offset Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 5/9] PCI: keystone: Cleanup ks_pcie_msi_irq_handler Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 6/9] PCI: dwc: Add support to use non default msi_irq_chip Kishon Vijay Abraham I
2019-02-21 10:15 ` [PATCH v4 7/9] PCI: keystone: Use Keystone specific msi_irq_chip Kishon Vijay Abraham I
2019-02-21 10:15 ` Kishon Vijay Abraham I [this message]
2019-02-21 10:15 ` [PATCH v4 9/9] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190221101518.22604-9-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=m-karicheri2@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).