linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: marek.vasut@gmail.com
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH V3 6/6] PCI: rcar: Fix 64bit MSI message address handling
Date: Sat, 23 Mar 2019 02:53:59 +0100	[thread overview]
Message-ID: <20190323015359.7231-6-marek.vasut@gmail.com> (raw)
In-Reply-To: <20190323015359.7231-1-marek.vasut@gmail.com>

From: Marek Vasut <marek.vasut+renesas@gmail.com>

The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.

However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.

Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.

There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-pci@vger.kernel.org
---
V2: - s/it's/its/ in commit message
    - Add R-B from Geert
V3: - Reworded commit message and thus dropped Geerts R-B
---
 drivers/pci/controller/pcie-rcar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 4d9e68ddcdd9..6bedd2167f3c 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -890,7 +890,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct rcar_msi *msi = &pcie->msi;
-	unsigned long base;
+	phys_addr_t base;
 	int err, i;
 
 	mutex_init(&msi->lock);
@@ -932,7 +932,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	base = virt_to_phys((void *)msi->pages);
 
 	rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR);
-	rcar_pci_write_reg(pcie, 0, PCIEMSIAUR);
+	rcar_pci_write_reg(pcie, base >> 32, PCIEMSIAUR);
 
 	/* enable all MSI interrupts */
 	rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER);
-- 
2.20.1


  parent reply	other threads:[~2019-03-23  1:54 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-23  1:53 [PATCH V3 1/6] PCI: rcar: Clean up remaining macros defining bits marek.vasut
2019-03-23  1:53 ` [PATCH V3 2/6] PCI: rcar: Replace unsigned long with u32 in register accessors marek.vasut
2019-03-25  8:07   ` Geert Uytterhoeven
2019-03-25 11:24     ` Marek Vasut
2019-03-23  1:53 ` [PATCH V3 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values marek.vasut
2019-03-25  8:14   ` Geert Uytterhoeven
2019-03-23  1:53 ` [PATCH V3 4/6] PCI: rcar: Replace (8 * n) with (n << 3) marek.vasut
2019-03-25  8:26   ` Geert Uytterhoeven
2019-03-25 11:34     ` Marek Vasut
2019-03-23  1:53 ` [PATCH V3 5/6] PCI: rcar: Clean up debug messages marek.vasut
2019-03-23  1:53 ` marek.vasut [this message]
2019-03-25  8:28   ` [PATCH V3 6/6] PCI: rcar: Fix 64bit MSI message address handling Geert Uytterhoeven
2019-03-25  8:03 ` [PATCH V3 1/6] PCI: rcar: Clean up remaining macros defining bits Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190323015359.7231-6-marek.vasut@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).