Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>,
	"Z.q. Hou" <zhiqiang.hou@nxp.com>
Subject: [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound window setup routines
Date: Fri, 12 Apr 2019 08:36:06 +0000
Message-ID: <20190412083635.33626-10-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20190412083635.33626-1-Zhiqiang.Hou@nxp.com>

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Outbound window routine:
 - Remove unused var definitions and register read operations.
 - Add the upper 32-bit cpu address setup of the window.
 - Instead of blindly write, only change the fields specified.
 - Mask the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.

Inbound window routine:
 - Add parameter 'u64 cpu_addr' to specify the cpu address
   of the window instead of using 'pci_addr'.
 - Change 'int pci_addr' to 'u64 pci_addr', and add setup
   of the upper 32-bit PCI address of the window.
 - Move the PCIe PIO master enablement to mobiveil_host_init().
 - Instead of blindly write, only change the fields specified.
 - Mask the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.
 - And add the statistic of initialized inbound windows.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
---
V5:
 - Corrected and retouched the subject and changelog.

 drivers/pci/controller/pcie-mobiveil.c | 70 +++++++++++++++-----------
 1 file changed, 42 insertions(+), 28 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index e88afc792a5c..4ba458474e42 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -65,9 +65,13 @@
 #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
 #define  WIN_ENABLE_SHIFT		0
 #define  WIN_TYPE_SHIFT			1
+#define  WIN_TYPE_MASK			0x3
+#define  WIN_SIZE_SHIFT			10
+#define  WIN_SIZE_MASK			0x3fffff
 
 #define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
 
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
 #define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
 #define  AXI_WINDOW_ALIGN_MASK		3
 
@@ -82,8 +86,10 @@
 #define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
 #define  AMAP_CTRL_EN_SHIFT		0
 #define  AMAP_CTRL_TYPE_SHIFT		1
+#define  AMAP_CTRL_TYPE_MASK		3
 
 #define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
 #define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
 #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
 #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
@@ -455,49 +461,51 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
 }
 
 static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
-			       int pci_addr, u32 type, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
-	int pio_ctrl_val;
-	int amap_ctrl_dw;
+	u32 value;
 	u64 size64 = ~(size - 1);
 
-	if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) {
+	if (win_num >= pcie->ppio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max inbound windows reached !\n");
 		return;
 	}
 
-	pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
-	pio_ctrl_val |= 1 << PIO_ENABLE_SHIFT;
-	csr_writel(pcie, pio_ctrl_val, PAB_PEX_PIO_CTRL);
-
-	amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-	amap_ctrl_dw |= (type << AMAP_CTRL_TYPE_SHIFT) |
-			(1 << AMAP_CTRL_EN_SHIFT) |
-			lower_32_bits(size64);
-	csr_writel(pcie, amap_ctrl_dw, PAB_PEX_AMAP_CTRL(win_num));
+	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 << AMAP_CTRL_EN_SHIFT) |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
 
 	csr_writel(pcie, upper_32_bits(size64),
 		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
 
-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, lower_32_bits(cpu_addr),
+		   PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+	csr_writel(pcie, lower_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
+	csr_writel(pcie, upper_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_H(win_num));
 
-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
-	csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
+	pcie->ib_wins_configured++;
 }
 
 /*
  * routine to program the outbound windows
  */
 static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
-			       u64 cpu_addr, u64 pci_addr,
-			       u32 config_io_bit, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
 
-	u32 value, type;
+	u32 value;
 	u64 size64 = ~(size - 1);
 
-	if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) {
+	if (win_num >= pcie->apio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max outbound windows reached !\n");
 		return;
@@ -507,10 +515,12 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
 	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
 	 * to 4 KB in PAB_AXI_AMAP_CTRL register
 	 */
-	type = config_io_bit;
 	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-	csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
-		   lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
+	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
 
 	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
 
@@ -518,11 +528,10 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
 	 * program AXI window base with appropriate value in
 	 * PAB_AXI_AMAP_AXI_WIN0 register
 	 */
-	value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num));
-	csr_writel(pcie, cpu_addr & (~AXI_WINDOW_ALIGN_MASK),
+	csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
 		   PAB_AXI_AMAP_AXI_WIN(win_num));
-
-	value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
 
 	csr_writel(pcie, lower_32_bits(pci_addr),
 		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
@@ -604,6 +613,11 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	value |= APIO_EN_MASK;
 	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
 
+	/* Enable PCIe PIO master */
+	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
+	value |= 1 << PIO_ENABLE_SHIFT;
+	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
 	/*
 	 * we'll program one outbound window for config reads and
 	 * another default inbound window for all the upstream traffic
@@ -616,7 +630,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
 
 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry(win, &pcie->resources) {
-- 
2.17.1


  parent reply index

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12  8:35 [PATCHv5 00/20] PCI: mobiveil: fixes for Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 01/20] PCI: mobiveil: Unify register accessors Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 02/20] PCI: mobiveil: Format the code without functionality change Z.q. Hou
2019-07-03 15:10   ` Lorenzo Pieralisi
2019-07-04  2:41     ` Z.q. Hou
2019-07-03 15:19   ` Lorenzo Pieralisi
2019-07-03 15:24     ` Lorenzo Pieralisi
2019-07-04  3:00     ` Z.q. Hou
2019-07-04 10:56       ` Lorenzo Pieralisi
2019-07-05  2:24         ` Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 03/20] PCI: mobiveil: Correct the returned error number Z.q. Hou
2019-07-03 14:17   ` Lorenzo Pieralisi
2019-07-04  2:38     ` Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 04/20] PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2019-06-11 16:59   ` Lorenzo Pieralisi
2019-06-11 17:29     ` Marc Zyngier
2019-06-12 10:54       ` Lorenzo Pieralisi
2019-06-12 11:22       ` Marc Zyngier
2019-06-12 11:34     ` Z.q. Hou
2019-06-12 13:08       ` Lorenzo Pieralisi
2019-06-15  1:30         ` Z.q. Hou
2019-06-17  9:33           ` Lorenzo Pieralisi
2019-06-17 10:34             ` Z.q. Hou
2019-06-28 11:35               ` Lorenzo Pieralisi
2019-07-01 10:07                 ` Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 05/20] PCI: mobiveil: Correct PCI base address in MEM/IO outbound windows Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 06/20] PCI: mobiveil: Replace the resource list iteration function Z.q. Hou
2019-04-12  8:35 ` [PATCHv5 07/20] PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2019-06-12 15:13   ` Lorenzo Pieralisi
2019-04-12  8:36 ` [PATCHv5 08/20] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions Z.q. Hou
2019-06-28 16:02   ` Lorenzo Pieralisi
2019-07-01 10:18     ` Z.q. Hou
2019-04-12  8:36 ` Z.q. Hou [this message]
2019-06-28 16:41   ` [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound window setup routines Lorenzo Pieralisi
2019-07-01 10:24     ` Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 10/20] PCI: mobiveil: Fix the INTx process errors Z.q. Hou
2019-06-12 15:08   ` Lorenzo Pieralisi
2019-06-14  7:08     ` Karthikeyan Mitran
2019-06-14 10:43       ` Lorenzo Pieralisi
2019-06-19  5:28         ` Karthikeyan Mitran
2019-06-19  7:24           ` Z.q. Hou
2019-06-28 17:05   ` Lorenzo Pieralisi
2019-07-01 10:27     ` Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 11/20] PCI: mobiveil: Correct the fixup of Class Code field Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 12/20] PCI: mobiveil: Move the link up waiting out of mobiveil_host_init() Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 13/20] PCI: mobiveil: Move IRQ chained handler setup out of DT parse Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 14/20] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 15/20] PCI: mobiveil: Fix the checking of valid device Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 16/20] PCI: mobiveil: Add link up condition check Z.q. Hou
2019-06-11 17:17   ` Lorenzo Pieralisi
2019-06-12 11:36     ` Z.q. Hou
2019-04-12  8:36 ` [PATCHv5 17/20] PCI: mobiveil: Complete initialization of host even if no PCIe link Z.q. Hou
2019-06-12 14:34   ` Lorenzo Pieralisi
2019-06-15  2:34     ` Z.q. Hou
2019-04-12  8:37 ` [PATCHv5 18/20] PCI: mobiveil: Disable IB and OB windows set by bootloader Z.q. Hou
2019-06-12 16:23   ` Lorenzo Pieralisi
2019-06-15  5:03     ` Z.q. Hou
2019-06-17  9:30       ` Lorenzo Pieralisi
2019-06-17 10:42         ` Z.q. Hou
2019-04-12  8:37 ` [PATCHv5 19/20] PCI: mobiveil: Add 8-bit and 16-bit register accessors Z.q. Hou
2019-06-12 13:54   ` Lorenzo Pieralisi
2019-06-15  1:13     ` Z.q. Hou
2019-06-17  9:29       ` Lorenzo Pieralisi
2019-06-17 10:16         ` Z.q. Hou
2019-04-12  8:37 ` [PATCHv5 20/20] dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional Z.q. Hou
2019-07-03 10:33 ` [PATCHv5 00/20] PCI: mobiveil: fixes for Mobiveil PCIe Host Bridge IP driver Lorenzo Pieralisi
2019-07-04  2:36   ` Z.q. Hou

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190412083635.33626-10-Zhiqiang.Hou@nxp.com \
    --to=zhiqiang.hou@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=xiaowei.bao@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git