linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Chris Healy <cphealy@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 05/11] PCI: dwc: imx6: Share PHY debug register definitions
Date: Sun, 14 Apr 2019 17:46:26 -0700	[thread overview]
Message-ID: <20190415004632.5907-6-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190415004632.5907-1-andrew.smirnov@gmail.com>

Both pcie-designware.c and pci-imx6.c contain custom definitions for
PHY debug registers R0/R1 and on top of that there's already a
definition for R0 in pcie-designware.h. Move all of the definitions to
pcie-designware.h. No functional change intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
 drivers/pci/controller/dwc/pci-imx6.c        |  6 ++----
 drivers/pci/controller/dwc/pcie-designware.c | 12 +++---------
 drivers/pci/controller/dwc/pcie-designware.h |  3 +++
 3 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index c0867df090f5..eeacdebd9b50 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -103,8 +103,6 @@ struct imx6_pcie {
 
 /* PCIe Port Logic registers (memory-mapped) */
 #define PL_OFFSET 0x700
-#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
 
 #define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
 #define PCIE_PHY_CTRL_DATA_LOC 0
@@ -831,8 +829,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 
 err_reset_phy:
 	dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
+		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
+		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
 	imx6_pcie_reset_phy(imx6_pcie);
 	return ret;
 }
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 31f6331ca46f..086e87a40316 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -14,12 +14,6 @@
 
 #include "pcie-designware.h"
 
-/* PCIe Port Logic registers */
-#define PLR_OFFSET			0x700
-#define PCIE_PHY_DEBUG_R1		(PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP	(0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING	(0x1 << 29)
-
 int dw_pcie_read(void __iomem *addr, int size, u32 *val)
 {
 	if (!IS_ALIGNED((uintptr_t)addr, size)) {
@@ -334,9 +328,9 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 	if (pci->ops->link_up)
 		return pci->ops->link_up(pci);
 
-	val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
-	return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
-		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
+	val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
+	return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
+		(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
 }
 
 void dw_pcie_setup(struct dw_pcie *pci)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 377f4c0b52da..b33ae13194be 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -41,6 +41,9 @@
 #define PCIE_PORT_DEBUG0		0x728
 #define PORT_LOGIC_LTSSM_STATE_MASK	0x1f
 #define PORT_LOGIC_LTSSM_STATE_L0	0x11
+#define PCIE_PORT_DEBUG1		0x72C
+#define PCIE_PORT_DEBUG1_LINK_UP		BIT(4)
+#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING	BIT(29)
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
 #define PORT_LOGIC_SPEED_CHANGE		BIT(17)
-- 
2.20.1


  parent reply	other threads:[~2019-04-15  0:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-15  0:46 [PATCH v4 00/11] i.MX6, DesignWare PCI improvements Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 01/11] PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock() Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 02/11] PCI: imx6: Drop imx6_pcie_wait_for_link() Andrey Smirnov
2019-04-15  8:36   ` Lucas Stach
2019-04-15  0:46 ` [PATCH v4 03/11] PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change() Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 04/11] PCI: imx6: Remove PCIE_PL_PFLR_* constants Andrey Smirnov
2019-04-15  0:46 ` Andrey Smirnov [this message]
2019-04-15  0:46 ` [PATCH v4 06/11] PCI: imx6: Make use of BIT() in constant definitions Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 07/11] PCI: imx6: Simplify bit operations in PHY functions Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 08/11] PCI: imx6: Simplify pcie_phy_poll_ack() Andrey Smirnov
2019-04-15  8:38   ` Lucas Stach
2019-04-15  0:46 ` [PATCH v4 09/11] PCI: imx6: Restrict PHY register data to 16-bit Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 10/11] PCI: imx6: Use flags to indicate support for suspend Andrey Smirnov
2019-04-15  0:46 ` [PATCH v4 11/11] PCI: imx6: Use usleep_range() in imx6_pcie_enable_ref_clk() Andrey Smirnov
2019-04-15  8:38   ` Lucas Stach
2019-05-01 10:39 ` [PATCH v4 00/11] i.MX6, DesignWare PCI improvements Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190415004632.5907-6-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=cphealy@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).