linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manikanta Maddireddy <mmaddireddy@nvidia.com>
To: <thierry.reding@gmail.com>, <bhelgaas@google.com>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<jonathanh@nvidia.com>, <lorenzo.pieralisi@arm.com>,
	<vidyas@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	Manikanta Maddireddy <mmaddireddy@nvidia.com>
Subject: [PATCH V2 17/28] PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal
Date: Tue, 23 Apr 2019 14:58:14 +0530	[thread overview]
Message-ID: <20190423092825.759-18-mmaddireddy@nvidia.com> (raw)
In-Reply-To: <20190423092825.759-1-mmaddireddy@nvidia.com>

Disable controllers which failed to link up and configure CLKREQ# signals
of these controllers as GPIO. This is required to avoid CLKREQ# signal of
inactive controllers interfering with PLLE power down sequence.

PCIE_CLKREQ_GPIO bits are defined only in Tegra186, however programming
these bits in other SoCs doesn't cause any side effects. Program these
bits for all Tegra SoCs to avoid conditional check.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V2: Corrected the comment in driver

 drivers/pci/controller/pci-tegra.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 0de24cb66a71..f74930654443 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -160,6 +160,8 @@
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211	(0x1 << 20)
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411	(0x2 << 20)
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111	(0x2 << 20)
+#define  AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x)		(1 << ((x) + 29))
+#define  AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL		(0x7 << 29)
 
 #define AFI_FUSE			0x104
 #define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
@@ -741,6 +743,12 @@ static void tegra_pcie_port_disable(struct tegra_pcie_port *port)
 
 	value &= ~AFI_PEX_CTRL_REFCLK_EN;
 	afi_writel(port->pcie, value, ctrl);
+
+	/* disable PCIe port and set CLKREQ# as GPIO to allow PLLE power down */
+	value = afi_readl(port->pcie, AFI_PCIE_CONFIG);
+	value |= AFI_PCIE_CONFIG_PCIE_DISABLE(port->index);
+	value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index);
+	afi_writel(port->pcie, value, AFI_PCIE_CONFIG);
 }
 
 static void tegra_pcie_port_free(struct tegra_pcie_port *port)
@@ -1153,9 +1161,12 @@ static void tegra_pcie_enable_controller(struct tegra_pcie *pcie)
 	value = afi_readl(pcie, AFI_PCIE_CONFIG);
 	value &= ~AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK;
 	value |= AFI_PCIE_CONFIG_PCIE_DISABLE_ALL | pcie->xbar_config;
+	value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL;
 
-	list_for_each_entry(port, &pcie->ports, list)
+	list_for_each_entry(port, &pcie->ports, list) {
 		value &= ~AFI_PCIE_CONFIG_PCIE_DISABLE(port->index);
+		value &= ~AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index);
+	}
 
 	afi_writel(pcie, value, AFI_PCIE_CONFIG);
 
-- 
2.17.1


  parent reply	other threads:[~2019-04-23  9:29 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23  9:27 [PATCH V2 00/28] Enable Tegra PCIe root port features Manikanta Maddireddy
2019-04-23  9:27 ` [PATCH V2 01/28] soc/tegra: pmc: Export tegra_powergate_power_on() Manikanta Maddireddy
2019-05-09 14:02   ` Thierry Reding
2019-04-23  9:27 ` [PATCH V2 02/28] PCI: tegra: Handle failure cases in tegra_pcie_power_on() Manikanta Maddireddy
2019-05-09 14:04   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 03/28] PCI: tegra: Rearrange Tegra PCIe driver functions Manikanta Maddireddy
2019-05-09 14:05   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 04/28] PCI: tegra: Disable PCIe interrupts in runtime suspend Manikanta Maddireddy
2019-05-09 14:10   ` Thierry Reding
2019-05-09 15:57     ` Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 05/28] PCI: tegra: Fix PCIe host power up sequence Manikanta Maddireddy
2019-05-09 14:14   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 06/28] PCI: tegra: Add PCIe Gen2 link speed support Manikanta Maddireddy
2019-05-09 14:17   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 07/28] PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability Manikanta Maddireddy
2019-05-09 14:17   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 08/28] PCI: tegra: Program UPHY electrical settings for Tegra210 Manikanta Maddireddy
2019-05-09 14:18   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 09/28] PCI: tegra: Enable opportunistic UpdateFC and ACK Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 10/28] PCI: tegra: Disable AFI dynamic clock gating Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 11/28] PCI: tegra: Process pending DLL transactions before entering L1 or L2 Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 12/28] PCI: tegra: Enable PCIe xclk clock clamping Manikanta Maddireddy
2019-05-09 14:20   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 13/28] PCI: tegra: Increase the deskew retry time Manikanta Maddireddy
2019-05-09 14:20   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 14/28] PCI: tegra: Add SW fixup for RAW violations Manikanta Maddireddy
2019-05-09 14:21   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 15/28] PCI: tegra: Update flow control timer frequency in Tegra210 Manikanta Maddireddy
2019-05-09 14:22   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 16/28] PCI: tegra: Set target speed as Gen1 before starting LTSSM Manikanta Maddireddy
2019-05-09 14:23   ` Thierry Reding
2019-04-23  9:28 ` Manikanta Maddireddy [this message]
2019-05-09 14:24   ` [PATCH V2 17/28] PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal Thierry Reding
2019-04-23  9:28 ` [PATCH V2 18/28] PCI: tegra: Program AFI_CACHE* registers only for Tegra20 Manikanta Maddireddy
2019-04-26 15:32   ` Thierry Reding
2019-04-29  9:30     ` Manikanta Maddireddy
2019-05-09 14:25       ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 19/28] PCI: tegra: Change PRSNT_SENSE irq log to debug Manikanta Maddireddy
2019-05-09 14:27   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 20/28] PCI: tegra: Use legacy irq for port service drivers Manikanta Maddireddy
2019-05-09 14:29   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 21/28] PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of soc struct Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 22/28] PCI: tegra: Access endpoint config only if PCIe link is up Manikanta Maddireddy
2019-04-23 20:24   ` Bjorn Helgaas
2019-04-24  3:51     ` Manikanta Maddireddy
2019-05-09 14:34       ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 23/28] dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop Manikanta Maddireddy
2019-05-01 19:52   ` Rob Herring
2019-05-09 14:34   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 24/28] arm64: tegra: Add PEX DPD states as pinctrl properties Manikanta Maddireddy
2019-05-09 14:38   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 25/28] PCI: tegra: Put PEX CLK & BIAS pads in DPD mode Manikanta Maddireddy
2019-05-09 14:35   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 26/28] dt-bindings: pci: tegra: Document reset-gpio optional prop Manikanta Maddireddy
2019-05-01 19:58   ` Rob Herring
2019-05-09 14:37   ` Thierry Reding
2019-05-09 14:37     ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 27/28] PCI: tegra: Add support for GPIO based PCIe reset Manikanta Maddireddy
2019-05-09 14:45   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 28/28] PCI: tegra: Change link retry log level to info Manikanta Maddireddy
2019-05-09 14:47   ` Thierry Reding
2019-04-26 13:22 ` [PATCH V2 00/28] Enable Tegra PCIe root port features Thierry Reding
2019-05-01 11:13   ` Lorenzo Pieralisi
2019-05-01 11:43     ` Manikanta Maddireddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190423092825.759-18-mmaddireddy@nvidia.com \
    --to=mmaddireddy@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).