From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Ley Foon Tan <lftan.linux@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-kernel@vger.kernel.org,
linux-pci <linux-pci@vger.kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH] PCI: altera-msi: Allow building as module
Date: Wed, 15 May 2019 14:59:33 +0100 [thread overview]
Message-ID: <20190515135933.GB30985@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <CAFiDJ59Pi6fxyE=0ifNJRoGc4QBX3XKJ=L7FXjJ_a6Vyh8otMg@mail.gmail.com>
On Tue, May 14, 2019 at 01:35:20PM +0800, Ley Foon Tan wrote:
> On Wed, Apr 24, 2019 at 12:57 PM Ley Foon Tan <ley.foon.tan@intel.com> wrote:
> >
> > Altera MSI IP is a soft IP and is only available after
> > FPGA image is programmed.
> >
> > Make driver modulable to support use case FPGA image is programmed
> > after kernel is booted. User proram FPGA image in kernel then only load
> > MSI driver module.
> >
> > Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> > ---
> > drivers/pci/controller/Kconfig | 2 +-
> > drivers/pci/controller/pcie-altera-msi.c | 10 ++++++++++
> > 2 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > index 4b550f9cdd56..920546cb84e2 100644
> > --- a/drivers/pci/controller/Kconfig
> > +++ b/drivers/pci/controller/Kconfig
> > @@ -181,7 +181,7 @@ config PCIE_ALTERA
> > FPGA.
> >
> > config PCIE_ALTERA_MSI
> > - bool "Altera PCIe MSI feature"
> > + tristate "Altera PCIe MSI feature"
> > depends on PCIE_ALTERA
> > depends on PCI_MSI_IRQ_DOMAIN
> > help
> > diff --git a/drivers/pci/controller/pcie-altera-msi.c b/drivers/pci/controller/pcie-altera-msi.c
> > index 025ef7d9a046..16d938920ca5 100644
> > --- a/drivers/pci/controller/pcie-altera-msi.c
> > +++ b/drivers/pci/controller/pcie-altera-msi.c
> > @@ -10,6 +10,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/irqchip/chained_irq.h>
> > #include <linux/init.h>
> > +#include <linux/module.h>
> > #include <linux/msi.h>
> > #include <linux/of_address.h>
> > #include <linux/of_irq.h>
> > @@ -288,4 +289,13 @@ static int __init altera_msi_init(void)
> > {
> > return platform_driver_register(&altera_msi_driver);
> > }
> > +
> > +static void __exit altera_msi_exit(void)
> > +{
> > + platform_driver_unregister(&altera_msi_driver);
> > +}
> > +
> > subsys_initcall(altera_msi_init);
> > +MODULE_DEVICE_TABLE(of, altera_msi_of_match);
> > +module_exit(altera_msi_exit);
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.19.0
> >
> Hi
>
> Any comment for this patch?
I will get to these patches for the next merge window, thanks.
Lorenzo
next prev parent reply other threads:[~2019-05-15 13:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 4:57 [PATCH] PCI: altera: Allow building as module Ley Foon Tan
2019-04-24 4:57 ` [PATCH] PCI: altera-msi: " Ley Foon Tan
2019-05-14 5:35 ` Ley Foon Tan
2019-05-15 13:59 ` Lorenzo Pieralisi [this message]
2019-05-16 2:12 ` Ley Foon Tan
2019-05-30 15:08 ` Lorenzo Pieralisi
2019-05-14 5:35 ` [PATCH] PCI: altera: " Ley Foon Tan
2019-05-30 15:07 ` Lorenzo Pieralisi
2019-06-04 13:18 ` Bjorn Helgaas
2019-06-11 7:22 ` Ley Foon Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190515135933.GB30985@e121166-lin.cambridge.arm.com \
--to=lorenzo.pieralisi@arm.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=ley.foon.tan@intel.com \
--cc=lftan.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).