Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Logan Gunthorpe <logang@deltatee.com>
Subject: [PATCH 1/3] PCI: Clean up resource_alignment parameter to not require static buffer
Date: Fri, 24 May 2019 14:16:08 -0600
Message-ID: <20190524201610.8039-2-logang@deltatee.com> (raw)
In-Reply-To: <20190524201610.8039-1-logang@deltatee.com>

Clean up the 'resource_alignment' parameter code to use kstrdup
in the initcall routine instead of a static buffer that wastes memory
regardless of whether the feature is used.  This allows us to drop
'COMMAND_LINE_SIZE' bytes (typically 256-4096 depending on architecture)
of static data.

This is similar to what has been done for the 'disable_acs_redir'
parameter.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/pci.c | 41 +++++++++++++++++++++++------------------
 1 file changed, 23 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 766f5779db92..bd7cdcfeb094 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5896,8 +5896,7 @@ resource_size_t __weak pcibios_default_alignment(void)
 	return 0;
 }
 
-#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
-static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
+static char *resource_alignment_param;
 static DEFINE_SPINLOCK(resource_alignment_lock);
 
 /**
@@ -5918,7 +5917,7 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev,
 
 	spin_lock(&resource_alignment_lock);
 	p = resource_alignment_param;
-	if (!*p && !align)
+	if (!p || !*p)
 		goto out;
 	if (pci_has_flag(PCI_PROBE_ONLY)) {
 		align = 0;
@@ -6084,21 +6083,25 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
 
 static ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
 {
-	if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
-		count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
 	spin_lock(&resource_alignment_lock);
-	strncpy(resource_alignment_param, buf, count);
-	resource_alignment_param[count] = '\0';
+
+	kfree(resource_alignment_param);
+	resource_alignment_param = kstrndup(buf, count, GFP_KERNEL);
+
 	spin_unlock(&resource_alignment_lock);
-	return count;
+
+	return resource_alignment_param ? count : -ENOMEM;
 }
 
 static ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
 {
-	size_t count;
+	size_t count = 0;
+
 	spin_lock(&resource_alignment_lock);
-	count = snprintf(buf, size, "%s", resource_alignment_param);
+	if (resource_alignment_param)
+		count = snprintf(buf, size, "%s", resource_alignment_param);
 	spin_unlock(&resource_alignment_lock);
+
 	return count;
 }
 
@@ -6238,8 +6241,7 @@ static int __init pci_setup(char *str)
 			} else if (!strncmp(str, "cbmemsize=", 10)) {
 				pci_cardbus_mem_size = memparse(str + 10, &str);
 			} else if (!strncmp(str, "resource_alignment=", 19)) {
-				pci_set_resource_alignment_param(str + 19,
-							strlen(str + 19));
+				resource_alignment_param = str + 19;
 			} else if (!strncmp(str, "ecrc=", 5)) {
 				pcie_ecrc_get_policy(str + 5);
 			} else if (!strncmp(str, "hpiosize=", 9)) {
@@ -6275,15 +6277,18 @@ static int __init pci_setup(char *str)
 early_param("pci", pci_setup);
 
 /*
- * 'disable_acs_redir_param' is initialized in pci_setup(), above, to point
- * to data in the __initdata section which will be freed after the init
- * sequence is complete. We can't allocate memory in pci_setup() because some
- * architectures do not have any memory allocation service available during
- * an early_param() call. So we allocate memory and copy the variable here
- * before the init section is freed.
+ * 'resource_alignment_param' and 'disable_acs_redir_param' are initialized
+ * in pci_setup(), above, to point to data in the __initdata section which
+ * will be freed after the init sequence is complete. We can't allocate memory
+ * in pci_setup() because some architectures do not have any memory allocation
+ * service available during an early_param() call. So we allocate memory and
+ * copy the variable here before the init section is freed.
+ *
  */
 static int __init pci_realloc_setup_params(void)
 {
+	resource_alignment_param = kstrdup(resource_alignment_param,
+					   GFP_KERNEL);
 	disable_acs_redir_param = kstrdup(disable_acs_redir_param, GFP_KERNEL);
 
 	return 0;
-- 
2.20.1


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-24 20:16 [PATCH 0/3] Cleanup resource_alignment parameter Logan Gunthorpe
2019-05-24 20:16 ` Logan Gunthorpe [this message]
2019-05-24 20:16 ` [PATCH 2/3] PCI: Move pci_[get|set]_resource_alignment_param() into their callers Logan Gunthorpe
2019-05-24 20:16 ` [PATCH 3/3] PCI: Force trailing new line to resource_alignment_param in sysfs Logan Gunthorpe
2019-08-21 13:16 ` [PATCH 0/3] Cleanup resource_alignment parameter Bjorn Helgaas

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190524201610.8039-2-logang@deltatee.com \
    --to=logang@deltatee.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox