PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it should not modify other interrupts' mask (such as ISR0). Fixes: 6302bf3ef78d ("PCI: Init PCIe feature bits for managed host bridge alloc") Signed-off-by: Remi Pommarel <repk@triplefau.lt> --- Please note that I will unlikely be able to answer any comments from May 24th to June 10th. --- drivers/pci/controller/pci-aardvark.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 134e0306ff00..27102d3b4f9c 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -451,10 +451,14 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); break; - case PCI_EXP_RTCTL: - new = (new & PCI_EXP_RTCTL_PMEIE) << 3; - advk_writel(pcie, new, PCIE_ISR0_MASK_REG); + case PCI_EXP_RTCTL: { + /* Only mask/unmask PME interrupt */ + u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) & + ~PCIE_MSG_PM_PME_MASK; + val |= (new & PCI_EXP_RTCTL_PMEIE) << 3; + advk_writel(pcie, val, PCIE_ISR0_MASK_REG); break; + } case PCI_EXP_RTSTA: new = (new & PCI_EXP_RTSTA_PME) >> 9; -- 2.20.1
On Wed, May 22, 2019 at 11:33:49PM +0200, Remi Pommarel wrote: > PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it > should not modify other interrupts' mask (such as ISR0). > > Fixes: 6302bf3ef78d ("PCI: Init PCIe feature bits for managed host bridge alloc") > Signed-off-by: Remi Pommarel <repk@triplefau.lt> > --- > Please note that I will unlikely be able to answer any comments from May > 24th to June 10th. > --- > drivers/pci/controller/pci-aardvark.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c > index 134e0306ff00..27102d3b4f9c 100644 > --- a/drivers/pci/controller/pci-aardvark.c > +++ b/drivers/pci/controller/pci-aardvark.c > @@ -451,10 +451,14 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, > advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); > break; > > - case PCI_EXP_RTCTL: > - new = (new & PCI_EXP_RTCTL_PMEIE) << 3; > - advk_writel(pcie, new, PCIE_ISR0_MASK_REG); > + case PCI_EXP_RTCTL: { > + /* Only mask/unmask PME interrupt */ > + u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) & > + ~PCIE_MSG_PM_PME_MASK; > + val |= (new & PCI_EXP_RTCTL_PMEIE) << 3; I know you have not introduced this code but maybe we can take an opportunity to clarify it (that << 3 shift obfuscates a bit): u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) & ~PCIE_MSG_PM_PME_MASK; if (new & PCI_EXP_RTCTL_PMEIE) val |= PCIE_MSG_PM_PME_MASK; advk_writel(pcie, val, PCIE_ISR0_MASK_REG); break; Or I am not reading the code correctly ? Regardless, I need Thomas' ACK to proceed. Lorenzo > + advk_writel(pcie, val, PCIE_ISR0_MASK_REG); > break; > + } > > case PCI_EXP_RTSTA: > new = (new & PCI_EXP_RTSTA_PME) >> 9; > -- > 2.20.1 >
On Thu, Jun 13, 2019 at 05:14:41PM +0100, Lorenzo Pieralisi wrote:
> On Wed, May 22, 2019 at 11:33:49PM +0200, Remi Pommarel wrote:
> > PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it
> > should not modify other interrupts' mask (such as ISR0).
> >
> > Fixes: 6302bf3ef78d ("PCI: Init PCIe feature bits for managed host bridge alloc")
> > Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> > ---
> > Please note that I will unlikely be able to answer any comments from May
> > 24th to June 10th.
> > ---
> > drivers/pci/controller/pci-aardvark.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> > index 134e0306ff00..27102d3b4f9c 100644
> > --- a/drivers/pci/controller/pci-aardvark.c
> > +++ b/drivers/pci/controller/pci-aardvark.c
> > @@ -451,10 +451,14 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
> > advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
> > break;
> >
> > - case PCI_EXP_RTCTL:
> > - new = (new & PCI_EXP_RTCTL_PMEIE) << 3;
> > - advk_writel(pcie, new, PCIE_ISR0_MASK_REG);
> > + case PCI_EXP_RTCTL: {
> > + /* Only mask/unmask PME interrupt */
> > + u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) &
> > + ~PCIE_MSG_PM_PME_MASK;
> > + val |= (new & PCI_EXP_RTCTL_PMEIE) << 3;
>
> I know you have not introduced this code but maybe we can
> take an opportunity to clarify it (that << 3 shift obfuscates
> a bit):
>
> u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) &
> ~PCIE_MSG_PM_PME_MASK;
>
> if (new & PCI_EXP_RTCTL_PMEIE)
> val |= PCIE_MSG_PM_PME_MASK;
>
> advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
> break;
>
> Or I am not reading the code correctly ?
Sure, that clarifies the code at the point where I realize that the
"<< 3" from the original code was off by one and the mask polarity was
inverted. So I'll fix all that in the v2.
Thanks.
--
Remi