Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Manikanta Maddireddy <mmaddireddy@nvidia.com>
To: <thierry.reding@gmail.com>, <bhelgaas@google.com>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<jonathanh@nvidia.com>, <lorenzo.pieralisi@arm.com>,
	<vidyas@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	Manikanta Maddireddy <mmaddireddy@nvidia.com>
Subject: [PATCH V6 15/27] PCI: tegra: Update flow control timer frequency in Tegra210
Date: Tue, 18 Jun 2019 23:31:54 +0530
Message-ID: <20190618180206.4908-16-mmaddireddy@nvidia.com> (raw)
In-Reply-To: <20190618180206.4908-1-mmaddireddy@nvidia.com>

Recommended UpdateFC threshold in Tegra210 is 0x60 for best performance
of x1 link. Setting this to 0x60 provides the best balance between number
of UpdateFC packets and read data sent over the link.

UpdateFC timer frequency is equal to twice the value of register content
in nsec, i.e (2 * 0x60) = 192 nsec.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V6: No change

V5: No change

V4: No change

V3: No change

V2: Changed update_fc_val to update_fc_threshold

 drivers/pci/controller/pci-tegra.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 70bfbb7930c8..6ed406c46409 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -320,6 +320,7 @@ struct tegra_pcie_soc {
 	bool update_clamp_threshold;
 	bool program_deskew_time;
 	bool raw_violation_fixup;
+	bool update_fc_timer;
 	struct {
 		struct {
 			u32 rp_ectl_2_r1;
@@ -668,6 +669,13 @@ static void tegra_pcie_apply_sw_fixup(struct tegra_pcie_port *port)
 		value |= soc->update_fc_threshold;
 		writel(value, port->base + RP_VEND_XP);
 	}
+
+	if (soc->update_fc_timer) {
+		value = readl(port->base + RP_VEND_XP);
+		value &= ~RP_VEND_XP_UPDATE_FC_THRESHOLD_MASK;
+		value |= soc->update_fc_threshold;
+		writel(value, port->base + RP_VEND_XP);
+	}
 }
 
 static void tegra_pcie_port_enable(struct tegra_pcie_port *port)
@@ -2410,6 +2418,7 @@ static const struct tegra_pcie_soc tegra20_pcie = {
 	.update_clamp_threshold = false,
 	.program_deskew_time = false,
 	.raw_violation_fixup = false,
+	.update_fc_timer = false,
 	.ectl.enable = false,
 };
 
@@ -2437,6 +2446,7 @@ static const struct tegra_pcie_soc tegra30_pcie = {
 	.update_clamp_threshold = false,
 	.program_deskew_time = false,
 	.raw_violation_fixup = false,
+	.update_fc_timer = false,
 	.ectl.enable = false,
 };
 
@@ -2459,6 +2469,7 @@ static const struct tegra_pcie_soc tegra124_pcie = {
 	.update_clamp_threshold = true,
 	.program_deskew_time = false,
 	.raw_violation_fixup = true,
+	.update_fc_timer = false,
 	.ectl.enable = false,
 };
 
@@ -2469,6 +2480,8 @@ static const struct tegra_pcie_soc tegra210_pcie = {
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
 	.pads_refclk_cfg0 = 0x90b890b8,
+	/* FC threshold is bit[25:18] */
+	.update_fc_threshold = 0x01800000,
 	.has_pex_clkreq_en = true,
 	.has_pex_bias_ctrl = true,
 	.has_intr_prsnt_sense = true,
@@ -2479,6 +2492,7 @@ static const struct tegra_pcie_soc tegra210_pcie = {
 	.update_clamp_threshold = true,
 	.program_deskew_time = true,
 	.raw_violation_fixup = false,
+	.update_fc_timer = true,
 	.ectl = {
 		.regs = {
 			.rp_ectl_2_r1 = 0x0000000f,
@@ -2518,6 +2532,7 @@ static const struct tegra_pcie_soc tegra186_pcie = {
 	.update_clamp_threshold = false,
 	.program_deskew_time = false,
 	.raw_violation_fixup = false,
+	.update_fc_timer = false,
 	.ectl.enable = false,
 };
 
-- 
2.17.1


  parent reply index

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 18:01 [PATCH V6 00/27] Enable Tegra PCIe root port features Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 01/27] soc/tegra: pmc: Export tegra_powergate_power_on() Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 02/27] PCI: tegra: Handle failure cases in tegra_pcie_power_on() Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 03/27] PCI: tegra: Rearrange Tegra PCIe driver functions Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 04/27] PCI: tegra: Mask AFI_INTR in runtime suspend Manikanta Maddireddy
2019-06-20 14:27   ` Lorenzo Pieralisi
2019-06-20 14:46     ` Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 05/27] PCI: tegra: Fix PCIe host power up sequence Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 06/27] PCI: tegra: Add PCIe Gen2 link speed support Manikanta Maddireddy
2019-06-20 14:32   ` Lorenzo Pieralisi
2019-06-20 14:57     ` Manikanta Maddireddy
2019-06-20 15:22       ` Lorenzo Pieralisi
2019-06-18 18:01 ` [PATCH V6 07/27] PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 08/27] PCI: tegra: Program UPHY electrical settings for Tegra210 Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 09/27] PCI: tegra: Enable opportunistic UpdateFC and ACK Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 10/27] PCI: tegra: Disable AFI dynamic clock gating Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 11/27] PCI: tegra: Process pending DLL transactions before entering L1 or L2 Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 12/27] PCI: tegra: Enable PCIe xclk clock clamping Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 13/27] PCI: tegra: Increase the deskew retry time Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 14/27] PCI: tegra: Add SW fixup for RAW violations Manikanta Maddireddy
2019-06-18 18:01 ` Manikanta Maddireddy [this message]
2019-06-18 18:01 ` [PATCH V6 16/27] PCI: tegra: Set target speed as Gen1 before starting LTSSM Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 17/27] PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 18/27] PCI: tegra: Program AFI_CACHE* registers only for Tegra20 Manikanta Maddireddy
2019-06-20 16:26   ` Lorenzo Pieralisi
2019-06-20 16:35     ` Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 19/27] PCI: tegra: Change PRSNT_SENSE IRQ log to debug Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 20/27] PCI: tegra: Disable MSI for Tegra PCIe root port Manikanta Maddireddy
2019-06-18 19:48   ` Bjorn Helgaas
2019-06-19  3:55     ` Manikanta Maddireddy
2019-06-19  9:50       ` Lorenzo Pieralisi
2019-06-18 18:02 ` [PATCH V6 21/27] PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of soc struct Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 22/27] dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 23/27] arm64: tegra: Add PEX DPD states as pinctrl properties Manikanta Maddireddy
2019-06-20 10:14   ` Thierry Reding
2019-06-18 18:02 ` [PATCH V6 24/27] PCI: tegra: Put PEX CLK & BIAS pads in DPD mode Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 25/27] PCI: Add DT binding for "reset-gpios" property Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 26/27] PCI: tegra: Add support for GPIO based PERST# Manikanta Maddireddy
2019-07-04 14:48   ` Jon Hunter
2019-07-04 15:29     ` Manikanta Maddireddy
2019-07-04 17:23       ` Jon Hunter
2019-06-18 18:02 ` [PATCH V6 27/27] PCI: tegra: Change link retry log level to debug Manikanta Maddireddy
2019-06-20 10:25 ` [PATCH V6 00/27] Enable Tegra PCIe root port features Thierry Reding
2019-06-20 10:53   ` Lorenzo Pieralisi
2019-06-20 11:14     ` Thierry Reding
2019-06-20 16:46 ` Lorenzo Pieralisi
2019-06-20 17:23   ` Manikanta Maddireddy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618180206.4908-16-mmaddireddy@nvidia.com \
    --to=mmaddireddy@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox