On Tue, Jun 18, 2019 at 11:32:02PM +0530, Manikanta Maddireddy wrote:
> Add PEX deep power down states as pinctrl properties to set in PCIe driver.
> In Tegra210, BIAS pads are not in power down mode when clamps are applied.
> To set the pads in DPD, pass the PEX DPD states as pinctrl properties to
> PCIe driver.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V6: No change
> 
> V5: No change
> 
> V4: No change
> 
> V3: No change
> 
> V2: Using standard pinctrl names, default and idle
> 
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)

Applied to for-5.3/arm64/dt, thanks.

Thierry