[PATCH AUTOSEL 5.1 022/141] tools: PCI: Fix broken pcitest compilation

[PATCH AUTOSEL 5.1 022/141] tools: PCI: Fix broken pcitest compilation

[Sasha Levin]

From: Alan Mikhak <alan.mikhak@sifive.com>

[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]

pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.

pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
  return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */

pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
  return run_test(test);

Fixes: fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/pci/pcitest.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index ec4d51f3308b..4c5be77c211f 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -47,15 +47,15 @@ struct pci_test {
 	unsigned long	size;
 };
 
-static void run_test(struct pci_test *test)
+static int run_test(struct pci_test *test)
 {
-	long ret;
+	int ret = -EINVAL;
 	int fd;
 
 	fd = open(test->device, O_RDWR);
 	if (fd < 0) {
 		perror("can't open PCI Endpoint Test device");
-		return;
+		return -ENODEV;
 	}
 
 	if (test->barnum >= 0 && test->barnum <= 5) {
-- 
2.20.1

[PATCH AUTOSEL 5.1 023/141] PCI: Return error if cannot probe VF

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 76002d8b48c4b08c9bd414517dd295e132ad910b ]

Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control
VF driver binding") allows the user to specify that drivers for VFs of
a PF should not be probed, but it actually causes pci_device_probe() to
return success back to the driver core in this case.  Therefore by all
sysfs appearances the device is bound to a driver, the driver link from
the device exists as does the device link back from the driver, yet the
driver's probe function is never called on the device.  We also fail to
do any sort of cleanup when we're prohibited from probing the device,
the IRQ setup remains in place and we even hold a device reference.

Instead, abort with errno before any setup or references are taken when
pci_device_can_probe() prevents us from trying to probe the device.

Link: https://lore.kernel.org/lkml/155672991496.20698.4279330795743262888.stgit@gimli.home
Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-driver.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 71853befd435..da7b82e56c83 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -414,6 +414,9 @@ static int pci_device_probe(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = to_pci_driver(dev->driver);
 
+	if (!pci_device_can_probe(pci_dev))
+		return -ENODEV;
+
 	pci_assign_irq(pci_dev);
 
 	error = pcibios_alloc_irq(pci_dev);
@@ -421,12 +424,10 @@ static int pci_device_probe(struct device *dev)
 		return error;
 
 	pci_dev_get(pci_dev);
-	if (pci_device_can_probe(pci_dev)) {
-		error = __pci_device_probe(drv, pci_dev);
-		if (error) {
-			pcibios_free_irq(pci_dev);
-			pci_dev_put(pci_dev);
-		}
+	error = __pci_device_probe(drv, pci_dev);
+	if (error) {
+		pcibios_free_irq(pci_dev);
+		pci_dev_put(pci_dev);
 	}
 
 	return error;
-- 
2.20.1

[PATCH AUTOSEL 5.1 062/141] PCI: sysfs: Ignore lockdep for remove attribute

[Sasha Levin]

From: Marek Vasut <marek.vasut+renesas@gmail.com>

[ Upstream commit dc6b698a86fe40a50525433eb8e92a267847f6f9 ]

With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device
below it causes a lockdep warning, e.g.,

  # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
  ============================================
  WARNING: possible recursive locking detected
  ...
  pci_bus 0000:01: busn_res: [bus 01] is released

The remove recursively removes the subtree below the bridge.  Each call
uses a different lock so there's no deadlock, but the locks were all
created with the same lockdep key so the lockdep checker can't tell them
apart.

Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is
safe to ignore the lockdep check between different "remove" kernfs
instances.

There's discussion about a similar issue in USB at [1], which resulted in
356c05d58af0 ("sysfs: get rid of some lockdep false positives") and
e9b526fe7048 ("i2c: suppress lockdep warning on delete_device"), which do
basically the same thing for USB "remove" and i2c "delete_device" files.

[1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org
Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[bhelgaas: trim commit log, details at above links]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 25794c27c7a4..eacf84ecdd0d 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -477,7 +477,7 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
 		pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
 	return count;
 }
-static struct device_attribute dev_remove_attr = __ATTR(remove,
+static struct device_attribute dev_remove_attr = __ATTR_IGNORE_LOCKDEP(remove,
 							(S_IWUSR|S_IWGRP),
 							NULL, remove_store);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 067/141] PCI: xilinx-nwl: Fix Multi MSI data programming

[Sasha Levin]

From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>

[ Upstream commit 181fa434d0514e40ebf6e9721f2b72700287b6e2 ]

According to the PCI Local Bus specification Revision 3.0,
section 6.8.1.3 (Message Control for MSI), endpoints that
are Multiple Message Capable as defined by bits [3:1] in
the Message Control for MSI can request a number of vectors
that is power of two aligned.

As specified in section 6.8.1.6 "Message data for MSI", the Multiple
Message Enable field (bits [6:4] of the Message Control register)
defines the number of low order message data bits the function is
permitted to modify to generate its system software allocated
vectors.

The MSI controller in the Xilinx NWL PCIe controller supports a number
of MSI vectors specified through a bitmap and the hwirq number for an
MSI, that is the value written in the MSI data TLP is determined by
the bitmap allocation.

For instance, in a situation where two endpoints sitting on
the PCI bus request the following MSI configuration, with
the current PCI Xilinx bitmap allocation code (that does not
align MSI vector allocation on a power of two boundary):

Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0
Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2]

The bitmap value(s) corresponds to the hwirq number that is programmed
into the Message Data for MSI field in the endpoint MSI capability
and is detected by the root complex to fire the corresponding
MSI irqs. The value written in Message Data for MSI field corresponds
to the first bit allocated in the bitmap for Multi MSI vectors.

The current Xilinx NWL MSI allocation code allows a bitmap allocation
that is not a power of two boundaries, so endpoint #2, is allowed to
toggle Message Data bit[0] to differentiate between its two vectors
(meaning that the MSI data will be respectively 0x0 and 0x1 for the two
vectors allocated to endpoint #2).

This clearly aliases with the Endpoint #1 vector allocation, resulting
in a broken Multi MSI implementation.

Update the code to allocate MSI bitmap ranges with a power of two
alignment, fixing the bug.

Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 81538d77f790..a9e07b8a45b1 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -483,15 +483,13 @@ static int nwl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 	int i;
 
 	mutex_lock(&msi->lock);
-	bit = bitmap_find_next_zero_area(msi->bitmap, INT_PCI_MSI_NR, 0,
-					 nr_irqs, 0);
-	if (bit >= INT_PCI_MSI_NR) {
+	bit = bitmap_find_free_region(msi->bitmap, INT_PCI_MSI_NR,
+				      get_count_order(nr_irqs));
+	if (bit < 0) {
 		mutex_unlock(&msi->lock);
 		return -ENOSPC;
 	}
 
-	bitmap_set(msi->bitmap, bit, nr_irqs);
-
 	for (i = 0; i < nr_irqs; i++) {
 		irq_domain_set_info(domain, virq + i, bit + i, &nwl_irq_chip,
 				domain->host_data, handle_simple_irq,
@@ -509,7 +507,8 @@ static void nwl_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	struct nwl_msi *msi = &pcie->msi;
 
 	mutex_lock(&msi->lock);
-	bitmap_clear(msi->bitmap, data->hwirq, nr_irqs);
+	bitmap_release_region(msi->bitmap, data->hwirq,
+			      get_count_order(nr_irqs));
 	mutex_unlock(&msi->lock);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 089/141] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 7be142caabc4780b13a522c485abc806de5c4114 ]

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index f4f53d092e00..2e1fd0c07cf1 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -545,12 +545,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
 
-/* Tegra PCIE requires relaxed ordering */
+/* Tegra20 and Tegra30 PCIE requires relaxed ordering */
 static void tegra_pcie_relax_enable(struct pci_dev *dev)
 {
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
 
 static int tegra_pcie_request_resources(struct tegra_pcie *pcie)
 {
-- 
2.20.1

[PATCH AUTOSEL 5.1 091/141] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit f99536e9d2f55996038158a6559d4254a7cc1693 ]

The outbound memory windows PCI base addresses should be taken
from the 'ranges' property of DT node to setup MEM/IO outbound
windows decoding correctly instead of being hardcoded to zero.

Update the code to retrieve the PCI base address for each range
and use it to program the outbound windows address decoders

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mobiveil.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 77052a0712d0..03d697b63e2a 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -552,8 +552,9 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		if (type) {
 			/* configure outbound translation window */
 			program_ob_windows(pcie, pcie->ob_wins_configured,
-				win->res->start, 0, type,
-				resource_size(win->res));
+					   win->res->start,
+					   win->res->start - win->offset,
+					   type, resource_size(win->res));
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 092/141] PCI: mobiveil: Fix the Class Code field

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit 0122af0a08243f344a438f924e5c2486486555b3 ]

Fix up the Class Code field in PCI configuration space and set it to
PCI_CLASS_BRIDGE_PCI.

Move the Class Code fixup to function mobiveil_host_init() where
it belongs.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mobiveil.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 03d697b63e2a..88e9b70081fc 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -558,6 +558,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		}
 	}
 
+	/* fixup for PCIe class register */
+	value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
+	value &= 0xff;
+	value |= (PCI_CLASS_BRIDGE_PCI << 16);
+	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
+
 	/* setup MSI hardware registers */
 	mobiveil_pcie_enable_msi(pcie);
 
@@ -798,9 +804,6 @@ static int mobiveil_pcie_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	/* fixup for PCIe class register */
-	csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS);
-
 	/* initialize the IRQ domains */
 	ret = mobiveil_pcie_init_irq_domain(pcie);
 	if (ret) {
-- 
2.20.1

[PATCH AUTOSEL 5.1 094/141] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit 6f3ab451aa5c2cbff33197d82fe8489cbd55ad91 ]

The reset value of Primary, Secondary and Subordinate bus numbers is
zero which is a broken setup.

Program a sensible default value for Primary/Secondary/Subordinate
bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 88e9b70081fc..e4a1964e1b43 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -501,6 +501,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		return err;
 	}
 
+	/* setup bus numbers */
+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
+	value &= 0xff000000;
+	value |= 0x00ff0100;
+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
 	/*
 	 * program Bus Master Enable Bit in Command Register in PAB Config
 	 * Space
-- 
2.20.1

[PATCH AUTOSEL 5.1 095/141] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit f7fee1b42fe4f8171a4b1cad05c61907c33c53f6 ]

The inbound and outbound windows have completely separate control
registers sets in the host controller MMIO space. Windows control
register are accessed through an MMIO base address and an offset
that depends on the window index.

Since inbound and outbound windows control registers are completely
separate there is no real need to use different window indexes in the
inbound/outbound windows initialization routines to prevent clashing.

To fix this inconsistency, change the MEM inbound window index to 0,
mirroring the outbound window set-up.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[lorenzo.pieralisi@arm.com: update commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mobiveil.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index e4a1964e1b43..387a20f3c240 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -546,7 +546,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			resource_size(pcie->ob_io_res));
 
 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry_safe(win, tmp, &pcie->resources) {
-- 
2.20.1

[PATCH AUTOSEL 5.1 105/141] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 381ed79c8655a40268ee7391f716edd90c5c3a97 ]

If CONFIG_GPIOLIB is not selected the compilation results in the
following build errors:

drivers/pci/controller/dwc/pci-dra7xx.c:
 In function dra7xx_pcie_probe:
drivers/pci/controller/dwc/pci-dra7xx.c:777:10:
 error: implicit declaration of function devm_gpiod_get_optional;
 did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration]

  reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);

drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
  reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
                                             ^~~~~~~~~~~~~~
                                             GPIOF_INIT_HIGH

Fix them by including the appropriate header file.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-dra7xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index ae84a69ae63a..4ef0a592505c 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 #include "../../pci.h"
 #include "pcie-designware.h"
-- 
2.20.1