linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Remi Pommarel <repk@triplefau.lt>
To: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <helgaas@kernel.org>
Cc: Ellie Reeves <ellierevves@gmail.com>,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] PCI: aardvark: Wait for endpoint to be ready before training link
Date: Tue, 6 Aug 2019 20:49:46 +0200	[thread overview]
Message-ID: <20190806184945.GU12859@voidbox.localdomain> (raw)
In-Reply-To: <20190522213351.21366-2-repk@triplefau.lt>

On Wed, May 22, 2019 at 11:33:50PM +0200, Remi Pommarel wrote:
> When configuring pcie reset pin from gpio (e.g. initially set by
> u-boot) to pcie function this pin goes low for a brief moment
> asserting the PERST# signal. Thus connected device enters fundamental
> reset process and link configuration can only begin after a minimal
> 100ms delay (see [1]).
> 
> Because the pin configuration comes from the "default" pinctrl it is
> implicitly configured before the probe callback is called:
> 
> driver_probe_device()
>   really_probe()
>     ...
>     pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
>                            function and PERST# is asserted */
>     ...
>     drv->probe()
> 
> [1] "PCI Express Base Specification", REV. 4.0
>     PCI Express, February 19 2014, 6.6.1 Conventional Reset
> 
> Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> ---
> Changes since v1:
>   - Add a comment about pinctrl implicit pin configuration
>   - Use more legible msleep
>   - Use PCI_PM_D3COLD_WAIT macro
> 
> Please note that I will unlikely be able to answer any comments from May
> 24th to June 10th.
> ---
>  drivers/pci/controller/pci-aardvark.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 134e0306ff00..d998c2b9cd04 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -324,6 +324,14 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
>  	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
>  	advk_writel(pcie, reg, PIO_CTRL);
>  
> +	/*
> +	 * PERST# signal could have been asserted by pinctrl subsystem before
> +	 * probe() callback has been called, making the endpoint going into
> +	 * fundamental reset. As required by PCI Express spec a delay for at
> +	 * least 100ms after such a reset before link training is needed.
> +	 */
> +	msleep(PCI_PM_D3COLD_WAIT);
> +
>  	/* Start link training */
>  	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
>  	reg |= PCIE_CORE_LINK_TRAINING;
> -- 
> 2.20.1

Gentle ping.

-- 
Remi

  reply	other threads:[~2019-08-06 18:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22 21:33 [PATCH v2] PCI: aardvark: Wait for endpoint to be ready before training link Remi Pommarel
2019-08-06 18:49 ` Remi Pommarel [this message]
2019-10-14 15:39   ` Lorenzo Pieralisi
2019-10-14 19:29 ` Thomas Petazzoni
2019-10-15  9:53 ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190806184945.GU12859@voidbox.localdomain \
    --to=repk@triplefau.lt \
    --cc=ellierevves@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).