Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH v5 10/23] PCI: hotplug: movable BARs: Try to assign unassigned resources only once
Date: Fri, 16 Aug 2019 19:50:48 +0300
Message-ID: <20190816165101.911-11-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190816165101.911-1-s.miroshnichenko@yadro.com>

With enabled BAR movement, BARs and bridge windows can only be assigned to
their direct parents, so there can be only one variant of resource tree,
thus every retry within the pci_assign_unassigned_root_bus_resources() will
result in the same tree, and it is enough to try just once.

In case of failures the pci_reassign_root_bus_resources() disables BARs for
one of the hotplugged devices and tries the assignment again.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/setup-bus.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index aee330047121..33f709095675 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1819,6 +1819,13 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
 	int pci_try_num = 1;
 	enum enable_type enable_local;
 
+	if (pci_movable_bars_enabled()) {
+		__pci_bus_size_bridges(bus, NULL);
+		__pci_bus_assign_resources(bus, NULL, NULL);
+
+		goto dump;
+	}
+
 	/* Don't realloc if asked to do so */
 	enable_local = pci_realloc_detect(bus, pci_realloc_enable);
 	if (pci_realloc_enabled(enable_local)) {
-- 
2.21.0


  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 16:50 [PATCH v5 00/23] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-08-22 12:37   ` Marta Rybczynska
2019-09-27 21:59   ` Bjorn Helgaas
2019-09-30  8:53     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-09-27 22:01   ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 03/23] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-09-27 22:02   ` Bjorn Helgaas
2019-09-30  8:44     ` David Laight
2019-09-30 16:17       ` Sergey Miroshnichenko
2019-09-30 12:59     ` Sergey Miroshnichenko
2019-10-15 22:14       ` Bjorn Helgaas
2019-10-16 15:50         ` Sergey Miroshnichenko
2019-10-16 17:29           ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 04/23] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 05/23] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 06/23] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 07/23] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 08/23] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 09/23] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-08-16 16:50 ` Sergey Miroshnichenko [this message]
2019-08-16 16:50 ` [PATCH v5 11/23] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 12/23] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 13/23] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 14/23] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 15/23] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 16/23] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-09-04  5:42   ` Oliver O'Halloran
2019-09-04 11:22     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 17/23] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 18/23] powerpc/pci: Handle BAR movement Sergey Miroshnichenko
2019-09-04  5:37   ` Oliver O'Halloran
2019-09-06 16:24     ` Sergey Miroshnichenko
2019-09-09 14:02       ` Oliver O'Halloran
2019-08-16 16:50 ` [PATCH v5 19/23] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 20/23] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 21/23] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 22/23] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 23/23] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816165101.911-11-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox