Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>,
	<linux-nvme@lists.infradead.org>, Christoph Hellwig <hch@lst.de>
Subject: [PATCH v5 21/23] nvme-pci: Handle movable BARs
Date: Fri, 16 Aug 2019 19:50:59 +0300
Message-ID: <20190816165101.911-22-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190816165101.911-1-s.miroshnichenko@yadro.com>

Hotplugged devices can affect the existing ones by moving their BARs. The
PCI subsystem will inform the NVME driver about this by invoking the
.rescan_prepare() and .rescan_done() hooks, so the BARs can by re-mapped.

Tested under the "randrw" mode of the fio tool. Before the hotplugging:

  % sudo cat /proc/iomem
  ...
                3fe800000000-3fe8007fffff : PCI Bus 0020:0b
                  3fe800000000-3fe8007fffff : PCI Bus 0020:18
                    3fe800000000-3fe8000fffff : 0020:18:00.0
                      3fe800000000-3fe8000fffff : nvme
                    3fe800100000-3fe80017ffff : 0020:18:00.0
  ...

, then another NVME drive was hot-added, so BARs of the 0020:18:00.0 are
moved:

  % sudo cat /proc/iomem
    ...
                3fe800000000-3fe800ffffff : PCI Bus 0020:0b
                  3fe800000000-3fe8007fffff : PCI Bus 0020:10
                    3fe800000000-3fe800003fff : 0020:10:00.0
                      3fe800000000-3fe800003fff : nvme
                    3fe800010000-3fe80001ffff : 0020:10:00.0
                  3fe800800000-3fe800ffffff : PCI Bus 0020:18
                    3fe800800000-3fe8008fffff : 0020:18:00.0
                      3fe800800000-3fe8008fffff : nvme
                    3fe800900000-3fe80097ffff : 0020:18:00.0
    ...

During the rescanning, both READ and WRITE speeds drop to zero for a while
due to driver's pause, then restore.

Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/nvme/host/pci.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index db160cee42ad..a805d80082ca 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1645,7 +1645,7 @@ static int nvme_remap_bar(struct nvme_dev *dev, unsigned long size)
 {
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 
-	if (size <= dev->bar_mapped_size)
+	if (dev->bar && size <= dev->bar_mapped_size)
 		return 0;
 	if (size > pci_resource_len(pdev, 0))
 		return -ENOMEM;
@@ -2980,6 +2980,23 @@ static void nvme_error_resume(struct pci_dev *pdev)
 	flush_work(&dev->ctrl.reset_work);
 }
 
+static void nvme_rescan_prepare(struct pci_dev *pdev)
+{
+	struct nvme_dev *dev = pci_get_drvdata(pdev);
+
+	nvme_dev_disable(dev, false);
+	nvme_dev_unmap(dev);
+	dev->bar = NULL;
+}
+
+static void nvme_rescan_done(struct pci_dev *pdev)
+{
+	struct nvme_dev *dev = pci_get_drvdata(pdev);
+
+	nvme_dev_map(dev);
+	nvme_reset_ctrl_sync(&dev->ctrl);
+}
+
 static const struct pci_error_handlers nvme_err_handler = {
 	.error_detected	= nvme_error_detected,
 	.slot_reset	= nvme_slot_reset,
@@ -3049,6 +3066,8 @@ static struct pci_driver nvme_driver = {
 #endif
 	.sriov_configure = pci_sriov_configure_simple,
 	.err_handler	= &nvme_err_handler,
+	.rescan_prepare	= nvme_rescan_prepare,
+	.rescan_done	= nvme_rescan_done,
 };
 
 static int __init nvme_init(void)
-- 
2.21.0


  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 16:50 [PATCH v5 00/23] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-08-22 12:37   ` Marta Rybczynska
2019-09-27 21:59   ` Bjorn Helgaas
2019-09-30  8:53     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-09-27 22:01   ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 03/23] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-09-27 22:02   ` Bjorn Helgaas
2019-09-30  8:44     ` David Laight
2019-09-30 16:17       ` Sergey Miroshnichenko
2019-09-30 12:59     ` Sergey Miroshnichenko
2019-10-15 22:14       ` Bjorn Helgaas
2019-10-16 15:50         ` Sergey Miroshnichenko
2019-10-16 17:29           ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 04/23] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 05/23] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 06/23] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 07/23] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 08/23] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 09/23] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 10/23] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 11/23] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 12/23] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 13/23] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 14/23] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 15/23] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 16/23] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-09-04  5:42   ` Oliver O'Halloran
2019-09-04 11:22     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 17/23] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 18/23] powerpc/pci: Handle BAR movement Sergey Miroshnichenko
2019-09-04  5:37   ` Oliver O'Halloran
2019-09-06 16:24     ` Sergey Miroshnichenko
2019-09-09 14:02       ` Oliver O'Halloran
2019-08-16 16:50 ` [PATCH v5 19/23] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 20/23] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-08-16 16:50 ` Sergey Miroshnichenko [this message]
2019-08-16 16:51 ` [PATCH v5 22/23] PCI/portdrv: Declare support of movable BARs Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 23/23] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816165101.911-22-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=hch@lst.de \
    --cc=helgaas@kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox