Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices
Date: Fri, 16 Aug 2019 19:50:40 +0300
Message-ID: <20190816165101.911-3-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190816165101.911-1-s.miroshnichenko@yadro.com>

The PCI_COMMAND_IO and PCI_COMMAND_MEMORY bits of the bridge must be
updated not only when enabling the bridge for the first time, but also if a
hotplugged device requests these types of resources.

Originally these bits were set by the pci_enable_device_flags() only, which
exits early if the bridge is already pci_is_enabled(). So if the bridge was
empty initially (an edge case), then hotplugged devices fail to IO/MEM.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e7f8c354e644..61d951766087 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1652,6 +1652,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
 		pci_enable_bridge(bridge);
 
 	if (pci_is_enabled(dev)) {
+		int i, bars = 0;
+
+		for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) {
+			if (dev->resource[i].flags & (IORESOURCE_MEM | IORESOURCE_IO))
+				bars |= (1 << i);
+		}
+		do_pci_enable_device(dev, bars);
+
 		if (!dev->is_busmaster)
 			pci_set_master(dev);
 		mutex_unlock(&dev->enable_mutex);
-- 
2.21.0


  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 16:50 [PATCH v5 00/23] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-08-22 12:37   ` Marta Rybczynska
2019-09-27 21:59   ` Bjorn Helgaas
2019-09-30  8:53     ` Sergey Miroshnichenko
2019-08-16 16:50 ` Sergey Miroshnichenko [this message]
2019-09-27 22:01   ` [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 03/23] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-09-27 22:02   ` Bjorn Helgaas
2019-09-30  8:44     ` David Laight
2019-09-30 16:17       ` Sergey Miroshnichenko
2019-09-30 12:59     ` Sergey Miroshnichenko
2019-10-15 22:14       ` Bjorn Helgaas
2019-10-16 15:50         ` Sergey Miroshnichenko
2019-10-16 17:29           ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 04/23] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 05/23] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 06/23] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 07/23] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 08/23] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 09/23] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 10/23] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 11/23] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 12/23] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 13/23] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 14/23] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 15/23] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 16/23] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-09-04  5:42   ` Oliver O'Halloran
2019-09-04 11:22     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 17/23] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 18/23] powerpc/pci: Handle BAR movement Sergey Miroshnichenko
2019-09-04  5:37   ` Oliver O'Halloran
2019-09-06 16:24     ` Sergey Miroshnichenko
2019-09-09 14:02       ` Oliver O'Halloran
2019-08-16 16:50 ` [PATCH v5 19/23] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 20/23] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 21/23] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 22/23] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 23/23] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816165101.911-3-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox