linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: "Chocron, Jonathan" <jonnyc@amazon.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"jingoohan1@gmail.com" <jingoohan1@gmail.com>,
	"Woodhouse, David" <dwmw@amazon.co.uk>,
	"Hanoch, Uri" <hanochu@amazon.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"gustavo.pimentel@synopsys.com" <gustavo.pimentel@synopsys.com>,
	"Wasserstrom, Barak" <barakw@amazon.com>,
	"Saidi, Ali" <alisaidi@amazon.com>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"Hawa, Hanna" <hhhawa@amazon.com>,
	"Shenhar, Talel" <talel@amazon.com>,
	"Krupnik, Ronen" <ronenk@amazon.com>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"benh@kernel.crashing.org" <benh@kernel.crashing.org>,
	Babu Moger <babu.moger@oracle.com>
Subject: Re: [PATCH v4 3/7] PCI/VPD: Add VPD release quirk for Amazon's Annapurna Labs Root Port
Date: Thu, 22 Aug 2019 16:08:27 +0100	[thread overview]
Message-ID: <20190822150827.GR23903@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <5a2c0097471e933d6f6a3964ac9fba9520994991.camel@amazon.com>


[+CC Babu Moger <babu.moger@oracle.com>]


On Thu, Aug 22, 2019 at 02:36:24PM +0000, Chocron, Jonathan wrote:
> On Thu, 2019-08-22 at 12:41 +0100, Andrew Murray wrote:
> > On Wed, Aug 21, 2019 at 06:35:43PM +0300, Jonathan Chocron wrote:
> > > The Amazon Annapurna Labs PCIe Root Port exposes the VPD
> > > capability,
> > > but there is no actual support for it.
> > > 
> > > The reason for not using the already existing quirk_blacklist_vpd()
> > > is that, although this fails pci_vpd_read/write, the 'vpd' sysfs
> > > entry still exists. When running lspci -vv, for example, this
> > > results in the following error:
> > > 
> > > pcilib: sysfs_read_vpd: read failed: Input/output error
> > 
> > Oh that's not nice. It's probably triggered by the -EIO in
> > pci_vpd_read.
> > A quick search online seems to show that other people have
> > experienced
> > this too - though from as far as I can tell this just gives you a
> > warning and pcilib will continnue to give other output?
> > 
> Correct.
> 
> > I guess every vpd blacklist'd driver will have the same issue. And
> > for
> > this reason I don't think that this patch is the right solution - as
> > otherwise all the other blacklisted drivers could follow your lead.
> > 
> I think that going forward, they should follow my lead, I just didn't
> want to possibly break any assumptions other vendors' tools might have
> regarding the existence/non-existence of the vpd sysfs entry.
> 
> > I don't think you need to fix this specifically for the AL driver and
> > so
> > I'd suggest that you can probably drop this patch. (Ideally pciutils
> > could be updated to not warn for this specific use-case).
> > 
> I don't think that solution should be implemented in pcituils. It
> rightfully warns when it fails to read from the vpd sysfs file - it
> first 'open's the file which succeeds, and then fails when trying to
> 'read' from it. I don't think that it should specifically "mask" out
> -EIO, since it shouldn't have to "know" that the underlying reason is a
> VPD quirk (or more precisely vpd->len == 0). Furthermore, it is
> possible that this error code would be returned for some other reason
> (not sure if currently this occurs).
> 
> I think that if the device doesn't properly support vpd, the kernel
> shouldn't expose the "empty" sysfs file in the first place.
> 
> In the long run, quirk_blacklist_vpd() should probably be modified to
> do what our quirk does or something similar (and then the al quirk can
> be removed). What do you think?
> 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > > 
> > > This quirk removes the sysfs entry, which avoids the error print.
> > > 
> > > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
> > > Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> > > ---
> > >  drivers/pci/vpd.c | 16 ++++++++++++++++
> > >  1 file changed, 16 insertions(+)
> > > 
> > > diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
> > > index 4963c2e2bd4c..c23a8ec08db9 100644
> > > --- a/drivers/pci/vpd.c
> > > +++ b/drivers/pci/vpd.c
> > > @@ -644,4 +644,20 @@ static void quirk_chelsio_extend_vpd(struct
> > > pci_dev *dev)
> > >  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> > >  			quirk_chelsio_extend_vpd);
> > >  
> > > +static void quirk_al_vpd_release(struct pci_dev *dev)
> > > +{
> > > +	if (dev->vpd) {
> > > +		pci_vpd_release(dev);
> > > +		dev->vpd = NULL;
> > > +		pci_warn(dev, FW_BUG "Releasing VPD capability (No
> > > support for VPD read/write transactions)\n");
> > > +	}
> > > +}
> > > +
> > > +/*
> > > + * The 0031 device id is reused for other non Root Port device
> > > types,
> > > + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI
> > > class.
> > > + */
> > > +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS,
> > > 0x0031,
> > > +			      PCI_CLASS_BRIDGE_PCI, 8,
> > > quirk_al_vpd_release);
> > > +
> > >  #endif
> > > -- 
> > > 2.17.1
> > > 

  parent reply	other threads:[~2019-08-22 15:08 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 15:35 [PATCH v4 0/7] Amazon's Annapurna Labs DT-based PCIe host controller driver Jonathan Chocron
2019-08-21 15:35 ` [PATCH v4 1/7] PCI: Add Amazon's Annapurna Labs vendor ID Jonathan Chocron
2019-08-21 15:35 ` [PATCH v4 2/7] PCI: Add ACS quirk for Amazon Annapurna Labs root ports Jonathan Chocron
2019-08-22  8:31   ` Andrew Murray
2019-09-04 13:33     ` Chocron, Jonathan
2019-08-21 15:35 ` [PATCH v4 3/7] PCI/VPD: Add VPD release quirk for Amazon's Annapurna Labs Root Port Jonathan Chocron
2019-08-22 11:41   ` Andrew Murray
2019-08-22 14:36     ` Chocron, Jonathan
2019-08-22 15:07       ` Andrew Murray
2019-09-04 13:36         ` Chocron, Jonathan
2019-09-04 14:08           ` Andrew Murray
2019-08-22 15:08       ` Andrew Murray [this message]
2019-08-21 15:35 ` [PATCH v4 4/7] PCI: Add quirk to disable MSI-X support " Jonathan Chocron
2019-08-22  7:54   ` Andrew Murray
2019-08-21 15:47 ` [PATCH v4 5/7] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding Jonathan Chocron
2019-08-22 11:15   ` Andrew Murray
2019-08-27 18:53   ` Rob Herring
2019-08-21 15:47 ` [PATCH v4 6/7] PCI: dwc: al: Add support for DW based driver type Jonathan Chocron
2019-08-22 10:00   ` Andrew Murray
2019-08-22 15:23     ` Chocron, Jonathan
2019-08-21 15:47 ` [PATCH v4 7/7] PCI: dwc: Add validation that PCIe core is set to correct mode Jonathan Chocron
2019-08-22 11:13   ` Andrew Murray
2019-08-22 16:30     ` Chocron, Jonathan
2019-08-27  9:48       ` Andrew Murray
2019-09-04 13:40         ` Chocron, Jonathan
2019-09-02  9:58 ` [PATCH v4 0/7] Amazon's Annapurna Labs DT-based PCIe host controller driver Lorenzo Pieralisi
2019-09-04 13:41   ` Chocron, Jonathan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190822150827.GR23903@e119886-lin.cambridge.arm.com \
    --to=andrew.murray@arm.com \
    --cc=alisaidi@amazon.com \
    --cc=babu.moger@oracle.com \
    --cc=barakw@amazon.com \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw@amazon.co.uk \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hanochu@amazon.com \
    --cc=hhhawa@amazon.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonnyc@amazon.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ronenk@amazon.com \
    --cc=talel@amazon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).