Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Xiaowei Bao <xiaowei.bao@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	leoyang.li@nxp.com, kishon@ti.com, lorenzo.pieralisi@arm.com,
	minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com,
	jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linuxppc-dev@lists.ozlabs.org
Cc: arnd@arndb.de, gregkh@linuxfoundation.org, zhiqiang.hou@nxp.com,
	Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for ls1088a and ls2088a
Date: Mon,  2 Sep 2019 11:17:14 +0800
Message-ID: <20190902031716.43195-10-xiaowei.bao@nxp.com> (raw)
In-Reply-To: <20190902031716.43195-1-xiaowei.bao@nxp.com>

Add PCIe EP mode support for ls1088a and ls2088a, there are some
difference between LS1 and LS2 platform, so refactor the code of
the EP driver.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2: 
 - This is a new patch for supporting the ls1088a and ls2088a platform.
v3:
 - Adjust the some struct assignment order in probe function.

 drivers/pci/controller/dwc/pci-layerscape-ep.c | 72 +++++++++++++++++++-------
 1 file changed, 53 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 5f0cb99..723bbe5 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -20,27 +20,29 @@
 
 #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
 
-struct ls_pcie_ep {
-	struct dw_pcie		*pci;
-	struct pci_epc_features	*ls_epc;
+#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
+
+struct ls_pcie_ep_drvdata {
+	u32				func_offset;
+	const struct dw_pcie_ep_ops	*ops;
+	const struct dw_pcie_ops	*dw_pcie_ops;
 };
 
-#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
+struct ls_pcie_ep {
+	struct dw_pcie			*pci;
+	struct pci_epc_features		*ls_epc;
+	const struct ls_pcie_ep_drvdata *drvdata;
+};
 
 static int ls_pcie_establish_link(struct dw_pcie *pci)
 {
 	return 0;
 }
 
-static const struct dw_pcie_ops ls_pcie_ep_ops = {
+static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
 	.start_link = ls_pcie_establish_link,
 };
 
-static const struct of_device_id ls_pcie_ep_of_match[] = {
-	{ .compatible = "fsl,ls-pcie-ep",},
-	{ },
-};
-
 static const struct pci_epc_features*
 ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
 {
@@ -87,10 +89,39 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
 	}
 }
 
-static const struct dw_pcie_ep_ops pcie_ep_ops = {
+static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
+						u8 func_no)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
+
+	WARN_ON(func_no && !pcie->drvdata->func_offset);
+	return pcie->drvdata->func_offset * func_no;
+}
+
+static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
 	.ep_init = ls_pcie_ep_init,
 	.raise_irq = ls_pcie_ep_raise_irq,
 	.get_features = ls_pcie_ep_get_features,
+	.func_conf_select = ls_pcie_ep_func_conf_select,
+};
+
+static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
+	.ops = &ls_pcie_ep_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
+	.func_offset = 0x20000,
+	.ops = &ls_pcie_ep_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
+	{ },
 };
 
 static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
@@ -103,7 +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
 	int ret;
 
 	ep = &pci->ep;
-	ep->ops = &pcie_ep_ops;
+	ep->ops = pcie->drvdata->ops;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
 	if (!res)
@@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 	if (!ls_epc)
 		return -ENOMEM;
 
-	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
-	if (IS_ERR(pci->dbi_base))
-		return PTR_ERR(pci->dbi_base);
+	pcie->drvdata = of_device_get_match_data(dev);
 
-	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
 	pci->dev = dev;
-	pci->ops = &ls_pcie_ep_ops;
-	pcie->pci = pci;
+	pci->ops = pcie->drvdata->dw_pcie_ops;
 
 	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
 
+	pcie->pci = pci;
 	pcie->ls_epc = ls_epc;
 
+	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+	if (IS_ERR(pci->dbi_base))
+		return PTR_ERR(pci->dbi_base);
+
+	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+
 	platform_set_drvdata(pdev, pcie);
 
 	ret = ls_add_pcie_ep(pcie, pdev);
-- 
2.9.5


  parent reply index

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-02  3:17 [PATCH v3 00/11] *** SUBJECT HERE *** Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 01/11] PCI: designware-ep: Add multiple PFs support for DWC Xiaowei Bao
2019-09-02 16:26   ` Andrew Murray
2019-09-03  3:43     ` Xiaowei Bao
2019-09-26 10:29       ` Andrew Murray
2019-09-26 13:38         ` Gustavo Pimentel
2019-09-02  3:17 ` [PATCH v3 02/11] PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 03/11] PCI: designware-ep: Move the function of getting MSI capability forward Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 04/11] PCI: designware-ep: Modify MSI and MSIX CAP way of finding Xiaowei Bao
2019-09-02 15:07   ` Andrew Murray
2019-09-03  2:33     ` Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 05/11] dt-bindings: pci: layerscape-pci: add compatible strings for ls1088a and ls2088a Xiaowei Bao
2019-09-02 12:31   ` Andrew Murray
2019-09-03  1:33     ` Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 06/11] PCI: layerscape: Fix some format issue of the code Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 07/11] PCI: layerscape: Modify the way of getting capability with different PEX Xiaowei Bao
2019-09-02 13:37   ` Andrew Murray
2019-09-03  2:13     ` Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 08/11] PCI: layerscape: Modify the MSIX to the doorbell mode Xiaowei Bao
2019-09-02 12:01   ` Andrew Murray
2019-09-12 11:24     ` Gustavo Pimentel
2019-09-14  6:37       ` Xiaowei Bao
2019-09-16  8:54         ` Gustavo Pimentel
2019-09-02  3:17 ` Xiaowei Bao [this message]
2019-09-02 12:46   ` [PATCH v3 09/11] PCI: layerscape: Add EP mode support for ls1088a and ls2088a Andrew Murray
2019-09-03  1:47     ` Xiaowei Bao
2019-09-12 12:49       ` Andrew Murray
2019-09-14  4:10         ` Xiaowei Bao
2019-09-16 14:37           ` Andrew Murray
2019-09-18  3:17             ` Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 10/11] arm64: dts: layerscape: Add PCIe EP node for ls1088a Xiaowei Bao
2019-09-02 13:06   ` Andrew Murray
2019-09-03  2:01     ` Xiaowei Bao
2019-09-12 13:01       ` Andrew Murray
2019-09-14  4:15         ` Xiaowei Bao
2019-09-02  3:17 ` [PATCH v3 11/11] misc: pci_endpoint_test: Add LS1088a in pci_device_id table Xiaowei Bao
2019-09-02 12:54   ` Andrew Murray
2019-09-03  1:52     ` Xiaowei Bao
2019-09-12 12:59       ` Andrew Murray
2019-09-14  4:13         ` Xiaowei Bao
2019-09-02  3:52 ` [PATCH v3 00/11] *** SUBJECT HERE *** Z.q. Hou
2019-09-02  3:54   ` Xiaowei Bao

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902031716.43195-10-xiaowei.bao@nxp.com \
    --to=xiaowei.bao@nxp.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kishon@ti.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.Lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=roy.zang@nxp.com \
    --cc=shawnguo@kernel.org \
    --cc=zhiqiang.hou@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git