From: Andrew Murray <andrew.murray@arm.com>
To: Vidya Sagar <vidyas@nvidia.com>
Cc: lorenzo.pieralisi@arm.com, bhelgaas@google.com,
robh+dt@kernel.org, thierry.reding@gmail.com,
jonathanh@nvidia.com, kishon@ti.com,
gustavo.pimentel@synopsys.com, digetx@gmail.com,
mperttunen@nvidia.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kthota@nvidia.com,
mmaddireddy@nvidia.com, sagar.tv@gmail.com
Subject: Re: [PATCH V3 4/6] PCI: tegra: Add support to enable slot regulators
Date: Mon, 2 Sep 2019 11:29:00 +0100 [thread overview]
Message-ID: <20190902102859.GA9720@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <20190828172850.19871-5-vidyas@nvidia.com>
On Wed, Aug 28, 2019 at 10:58:48PM +0530, Vidya Sagar wrote:
> Add support to get regulator information of 3.3V and 12V supplies of a PCIe
> slot from the respective controller's device-tree node and enable those
> supplies. This is required in platforms like p2972-0000 where the supplies
> to x16 slot owned by C5 controller need to be enabled before attempting to
> enumerate the devices.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
> ---
> V3:
> * Added a dev_err() print for failure case of tegra_pcie_get_slot_regulators() API
> * Modified to make 100ms sleep valid only if at least one of the regulator handles exist
>
> V2:
> * Addressed review comments from Thierry Reding and Andrew Murray
> * Handled failure case of devm_regulator_get_optional() for -ENODEV cleanly
>
> drivers/pci/controller/dwc/pcie-tegra194.c | 83 ++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 77fa6f70bc96..18453cc5e7e4 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -278,6 +278,8 @@ struct tegra_pcie_dw {
> u32 aspm_l0s_enter_lat;
>
> struct regulator *pex_ctl_supply;
> + struct regulator *slot_ctl_3v3;
> + struct regulator *slot_ctl_12v;
>
> unsigned int phy_count;
> struct phy **phys;
> @@ -1047,6 +1049,73 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
> }
> }
>
> +static int tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie)
> +{
> + pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3");
> + if (IS_ERR(pcie->slot_ctl_3v3)) {
> + if (PTR_ERR(pcie->slot_ctl_3v3) != -ENODEV)
> + return PTR_ERR(pcie->slot_ctl_3v3);
> +
> + pcie->slot_ctl_3v3 = NULL;
> + }
> +
> + pcie->slot_ctl_12v = devm_regulator_get_optional(pcie->dev, "vpcie12v");
> + if (IS_ERR(pcie->slot_ctl_12v)) {
> + if (PTR_ERR(pcie->slot_ctl_12v) != -ENODEV)
> + return PTR_ERR(pcie->slot_ctl_12v);
> +
> + pcie->slot_ctl_12v = NULL;
> + }
> +
> + return 0;
> +}
> +
> +static int tegra_pcie_enable_slot_regulators(struct tegra_pcie_dw *pcie)
> +{
> + int ret;
> +
> + if (pcie->slot_ctl_3v3) {
> + ret = regulator_enable(pcie->slot_ctl_3v3);
> + if (ret < 0) {
> + dev_err(pcie->dev,
> + "Failed to enable 3.3V slot supply: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + if (pcie->slot_ctl_12v) {
> + ret = regulator_enable(pcie->slot_ctl_12v);
> + if (ret < 0) {
> + dev_err(pcie->dev,
> + "Failed to enable 12V slot supply: %d\n", ret);
> + goto fail_12v_enable;
> + }
> + }
> +
> + /*
> + * According to PCI Express Card Electromechanical Specification
> + * Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive)
> + * should be a minimum of 100ms.
> + */
> + if (pcie->slot_ctl_3v3 || pcie->slot_ctl_12v)
> + msleep(100);
> +
> + return 0;
> +
> +fail_12v_enable:
> + if (pcie->slot_ctl_3v3)
> + regulator_disable(pcie->slot_ctl_3v3);
> + return ret;
> +}
> +
> +static void tegra_pcie_disable_slot_regulators(struct tegra_pcie_dw *pcie)
> +{
> + if (pcie->slot_ctl_12v)
> + regulator_disable(pcie->slot_ctl_12v);
> + if (pcie->slot_ctl_3v3)
> + regulator_disable(pcie->slot_ctl_3v3);
> +}
> +
> static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
> bool en_hw_hot_rst)
> {
> @@ -1060,6 +1129,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
> return ret;
> }
>
> + ret = tegra_pcie_enable_slot_regulators(pcie);
> + if (ret < 0)
> + goto fail_slot_reg_en;
> +
> ret = regulator_enable(pcie->pex_ctl_supply);
> if (ret < 0) {
> dev_err(pcie->dev, "Failed to enable regulator: %d\n", ret);
> @@ -1142,6 +1215,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
> fail_core_clk:
> regulator_disable(pcie->pex_ctl_supply);
> fail_reg_en:
> + tegra_pcie_disable_slot_regulators(pcie);
> +fail_slot_reg_en:
> tegra_pcie_bpmp_set_ctrl_state(pcie, false);
>
> return ret;
> @@ -1174,6 +1249,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie)
> return ret;
> }
>
> + tegra_pcie_disable_slot_regulators(pcie);
> +
> ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> if (ret) {
> dev_err(pcie->dev, "Failed to disable controller %d: %d\n",
> @@ -1373,6 +1450,12 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = tegra_pcie_get_slot_regulators(pcie);
> + if (ret < 0) {
> + dev_err(dev, "Failed to get slot regulators: %d\n", ret);
> + return ret;
> + }
> +
> pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl");
> if (IS_ERR(pcie->pex_ctl_supply)) {
> dev_err(dev, "Failed to get regulator: %ld\n",
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-09-02 10:29 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 17:28 [PATCH V3 0/6] PCI: tegra: Enable PCIe C5 controller of Tegra194 in p2972-0000 platform Vidya Sagar
2019-08-28 17:28 ` [PATCH V3 1/6] dt-bindings: PCI: tegra: Add sideband pins configuration entries Vidya Sagar
2019-09-02 10:40 ` Andrew Murray
2019-09-02 11:38 ` Thierry Reding
2019-09-02 13:38 ` Rob Herring
2019-08-28 17:28 ` [PATCH V3 2/6] dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries Vidya Sagar
2019-08-29 12:03 ` Thierry Reding
2019-08-29 15:18 ` Vidya Sagar
2019-08-29 16:41 ` Thierry Reding
2019-09-02 10:41 ` Andrew Murray
2019-09-02 11:38 ` Thierry Reding
2019-09-02 13:38 ` Rob Herring
2019-08-28 17:28 ` [PATCH V3 3/6] PCI: tegra: Add support to configure sideband pins Vidya Sagar
2019-09-02 10:18 ` Andrew Murray
2019-09-02 11:38 ` Thierry Reding
2019-08-28 17:28 ` [PATCH V3 4/6] PCI: tegra: Add support to enable slot regulators Vidya Sagar
2019-09-02 10:29 ` Andrew Murray [this message]
2019-09-02 11:40 ` Thierry Reding
2019-08-28 17:28 ` [PATCH V3 5/6] arm64: tegra: Add configuration for PCIe C5 sideband signals Vidya Sagar
2019-09-02 10:45 ` Andrew Murray
2019-08-28 17:28 ` [PATCH V3 6/6] arm64: tegra: Add PCIe slot supply information in p2972-0000 platform Vidya Sagar
2019-09-02 10:47 ` Andrew Murray
2019-09-05 8:14 ` [PATCH V3 0/6] PCI: tegra: Enable PCIe C5 controller of Tegra194 " Vidya Sagar
2019-09-05 9:34 ` Lorenzo Pieralisi
2019-09-05 10:50 ` Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190902102859.GA9720@e119886-lin.cambridge.arm.com \
--to=andrew.murray@arm.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mmaddireddy@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).