[PATCH] x86/PCI: Remove D0 PME capability on AMD FCH xHCI - Kai-Heng Feng

From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kai-Heng Feng <kai.heng.feng@canonical.com>
Subject: [PATCH] x86/PCI: Remove D0 PME capability on AMD FCH xHCI
Date: Mon,  2 Sep 2019 22:52:52 +0800	[thread overview]
Message-ID: <20190902145252.32111-1-kai.heng.feng@canonical.com> (raw)

There's an xHCI device that doesn't wake when a USB 2.0 device gets
plugged to its USB 3.0 port. The driver's own runtime suspend callback
was called, PME# signaling was enabled, but it stays at PCI D0:

00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
        Subsystem: Dell FCH USB XHCI Controller [1028:087e]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f0b68000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-

A PCI device can be runtime suspended while still stays at D0 when it
supports D0 PME# and its ACPI _S0W method reports D0. Though plugging
USB 3.0 devices can wakeup the xHCI, it doesn't respond to USB 2.0
devices.

So let's disable D0 PME capability on this device to avoid the issue.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 arch/x86/pci/fixup.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 527e69b12002..0851a05d092f 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -588,6 +588,17 @@ static void pci_fixup_amd_ehci_pme(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme);
 
+/*
+ * Device [1022:7914]
+ * D0 PME# doesn't get asserted when plugging USB 2.0 device.
+ */
+static void pci_fixup_amd_fch_xhci_pme(struct pci_dev *dev)
+{
+	dev_info(&dev->dev, "PME# does not work under D0, disabling it\n");
+	dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7914, pci_fixup_amd_fch_xhci_pme);
+
 /*
  * Apple MacBook Pro: Avoid [mem 0x7fa00000-0x7fbfffff]
  *
-- 
2.17.1

