Re: [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices

[Bjorn Helgaas <helgaas@kernel.org>]

On Fri, Aug 16, 2019 at 07:50:40PM +0300, Sergey Miroshnichenko wrote:
> The PCI_COMMAND_IO and PCI_COMMAND_MEMORY bits of the bridge must be
> updated not only when enabling the bridge for the first time, but also if a
> hotplugged device requests these types of resources.

Yeah, this assumption that pci_is_enabled() means PCI_COMMAND_IO and
PCI_COMMAND_MEMORY are set correctly even though we may now need
*different* settings than when we incremented pdev->enable_cnt is
quite broken.

> Originally these bits were set by the pci_enable_device_flags() only, which
> exits early if the bridge is already pci_is_enabled(). So if the bridge was
> empty initially (an edge case), then hotplugged devices fail to IO/MEM.
> 
> Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
> ---
>  drivers/pci/pci.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index e7f8c354e644..61d951766087 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1652,6 +1652,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
>  		pci_enable_bridge(bridge);
>  
>  	if (pci_is_enabled(dev)) {
> +		int i, bars = 0;
> +
> +		for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) {
> +			if (dev->resource[i].flags & (IORESOURCE_MEM | IORESOURCE_IO))
> +				bars |= (1 << i);
> +		}
> +		do_pci_enable_device(dev, bars);
> +
>  		if (!dev->is_busmaster)
>  			pci_set_master(dev);
>  		mutex_unlock(&dev->enable_mutex);
> -- 
> 2.21.0
>